• 제목/요약/키워드: oblique reflection

검색결과 52건 처리시간 0.034초

비균일 단축 이방성 매질을 투과하는 빛의 편광상태 변화 표현 (Polarization Analysis of Light Passing Through Non-uniform Uniaxial Media)

  • 류장위;김상열;김용기
    • 한국광학회지
    • /
    • 제21권4호
    • /
    • pp.161-167
    • /
    • 2010
  • 단축 이방성 매질에서 다른 단축 이방성 매질로 진행하는 빛의 유효투과계수 표현을 유도하였다. 두 이방성 매질 사이에 가상의 등방성 매질을 도입한 후, 가상의 등방성 매질 내의 다중반사 효과를 반영함으로써 두 단축 이방성 매질간의 경계면에서 유효 투과계수 표현을 제시하였다. 균일하지 않은 단축 이방성 매질을 얇고 균일한 단축 이방성 층들의 합으로 대치하여 각각의 두 경우에 대하여 투과하는 빛의 편광상태 변화를 계산한 후 비교함으로써 이 방법의 타당성을 확인하였다.

강하게 가열된 벽면 위에서 충격파에 의한 경계층 박리의 제거에 관한 수치 연구 (Numerical Study on the Suppression of Shock Induced Separation on a Strongly Heated Wall)

  • 이덕봉;신준철
    • 한국전산유체공학회지
    • /
    • 제2권2호
    • /
    • pp.59-72
    • /
    • 1997
  • A numerical model is constructed to simulate the interactions of oblique shock wave / turbulent boundary layer on a strongly heated wall. The heated wall temperature is two times higher than the adiabatic wall temperature and the shock wave is strong enough to induce boundary layer separation. The numerical diffusion in the finite volume method is reduced by the use of a higher order convection scheme(UMIST scheme) which is a TVD version of QUICK scheme. The turbulence model is Chen-Kim two time scale model. The comparison of the wall pressure distribution with the experimental data ensures the validity of this numerical model. The effect of strong wall heating enlarges the separation region upstream and downstream. In order to eliminate the separation, wall suction is applied at the shock foot position. The bleeding slot width is about same as the upstream boundary layer thickness and suction mass flow is 10% of the flow rate in the upstream boundary layer. The final configuration of the shock reflection pattern and the wall pressure distribution approach to the non-viscous value when wall suction is applied.

  • PDF

Reflection Seismology in the Southern Ayu Trough, a Slow-spreading Divergent Boundary

  • Hong, Jong-Kuk;Lee, Sang-Mook
    • Ocean and Polar Research
    • /
    • 제24권3호
    • /
    • pp.189-196
    • /
    • 2002
  • A multichannel seismic survey was conducted in the southern Ayu Trough which is the only spreading boundary between the Philippine Sea and Caroline plates. The seismic system used in this study comprises of 2.46-l sleeve gun and a 12-channel streamer with a group interval of 6.25m. Migration technique was used to analyze seismic velocity, and poststack depth migration was applied to the stacked data. The sediment thickness obtained from the depth section tends to increase with distance from the spreading axis. Sedimentation rates are poorly constrainted in the study area. The apparent half-spreading rates estimated from the sediment thickness and sedimentation rate from DSDP hole on the caroline plate are 4.7mm/yr and 7.9mm/yr at $1^{\circ}24'N\;and\;0^{\circ}42'N$, respectively, which are fester than Previously suggested. On the basis of new oblique spreading geometry, the recalculated spreading rates are 5.4mm/yr and 9.1mm/yr at $1^{\circ}24'N\;and\;0^{\circ}42'N$, respectively. Seismic sections show that the topography is asymmetric across the Ayu Trough and the acoustic basement is rough. These features are consistent with the earlier suggestion that the Ayu Trough is a slow-spreading divergent boundary. A detailed examination of seismic profiles away from the axis shows that sediments can be divided into two layers which implies a possible change in the spreading rate anuor sedimentation condition during the formation of the trough.

유연막 방파제에 의한 경사파의 산란 (Scattering of Oblique Waves by an Inanite Flexible Membrane Breakwater)

  • 조일형;홍석원
    • 한국해안해양공학회지
    • /
    • 제7권3호
    • /
    • pp.219-226
    • /
    • 1995
  • 본 연구에서는 PVC나 PU와 같은 유연성이 있는 유연막 방파제와 임의의 입사각을 갖는 파의 상호작용문제를 다루었다. 유연막 방파제에 작용하는 파랑하증을 구하기 위하여 고유함수전개법(eigen-function expansion method)을 사용하였다. 이때 유연막의 변형이 유체장에 미치는 영향은 경계조건식으로부터 표현된다. 경계조건식에서 유연막의 변형은 막 방정식을 풀어 구한다. 계산 예로 유연막에 작용하는 장력과 계류삭의 강성계수 그리고 유연막의 높이를 변화시키면서 투과율과 반사율의 차이를 비교하였고, 입사각도의 변화에 따른 방파 효과의 차이를 살펴보았다. 결론적으로 유연막 구조물을 적절히 설계한다면 미래의 훌륭한 방파제로 활용이 가능하다고 여겨진다.

  • PDF

초음속 노즐 내부 이차제트 분출을 통한 추력편향 제어에 관한 연구 (Thrust Vectoring Control by Injection of Secondary Jets Inside Supersonic Nozzle)

  • 윤상훈;김국진;민성규;이열;전동연
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2008년도 제31회 추계학술대회논문집
    • /
    • pp.349-352
    • /
    • 2008
  • 수축-확대 초음속 노즐 내부에 분출된 이차제트에 의한 추력편향 제어에 관한 실험적, 수치적 연구가 진행되었다. 특정위치(노즐 목으로부터 12mm 떨어진 곳)에서 분출되는 이차제트 유동전압이 변화할 때 나타나는 제트유동의 추력편향 특성이 관찰되었다. 수치해석 결과는 동일한 경계조건에서 수행된 과거 연구결과 및 본 연구에서 수행된 쉴러린 유동가시화 결과와 비교되었으며, 정성적으로 좋은 일치를 나타냈다. 추력편향의 특성은 노즐 내부의 경사충격파의 반사구조, 즉, 이차제트 압력비 SPR의 크기에 관계되어 있음이 관찰되었다.

  • PDF

한반도 동해 대륙주변부 신제삼기 퇴적분지의 진화 (Evolution of Neogene Sedimentary Basins in the Eastern Continental Margin of Korea)

  • 윤석훈;조성권
    • 한국석유지질학회지
    • /
    • 제1권1호
    • /
    • pp.15-27
    • /
    • 1993
  • 한반도 동해 대륙주변부에서 취득한 에어건 탄성파 탐사자료에 의하면, 이 지역에는 포항-영덕분지, 묵호분지, 후포분지 등, 세 개의 주요 신제삼기 퇴적분지가 대륙붕 및 대륙사면에 형성되어 있다. 이들 퇴적분지에서의 탄성파층서 및 구조분석 결과, 분지의 형성과 퇴적물 충진은 주향이동신장성(transtensional) 및 차후의 압축성(contractional) 광역지구조운동과 밀접한 관계를 갖고 있는 것으로 보인다. 동해 후열도분지가 확장되기 시작하던 올리고세와 전기 마이오세 동안, 한반도 동해 대륙주변부에는 신장성 전단력(tensional shear stress)이 작용하여 후포단층과 양산단층을 따라 우수주향이동 단 층운동이 일어났으며, 이들 평행한 두 단층 사이의 중첩부에는 당겨열림작용(pull-apart opening)에 의해 포항-영덕 분지가 형성되었다. 한편, 한국대지(Korea Plateau)와 접한 동해 대륙주변부에서는 블럭단층운동으로 인해 융기된 고기저(basement highs) 사이에 묵호분지가 형성되었다. 그 후 중기 마이오세 말에 동해가 닫히기 시작하면서, 연구지역의 응력장은 신장성에서 압축성으로 전환되었으며, 후기 마이오세와 전기 플라이오세, 두 번에 걸쳐 지각변형이 일어나면서 분지를 충진한 퇴적층이 변형되었고, 일부지역에서는 융기가 일어났다. 특히, 전기 플라이오세 동안에는 후포단층이 사교이동양상(oblique-slip sense)을 보이면서 재활성화 되었으며, 이로 인해 반지구(half-graben)형태의 후포분지가 형성되었다.

  • PDF

전자파 잔향실용 0.65-7 GHz 광대역 역원뿔 안테나 설계 (0.65-7 GHz Inverse Conical Antenna for Reverberation Chamber)

  • 정진영;정재영
    • 전자공학회논문지
    • /
    • 제54권3호
    • /
    • pp.10-14
    • /
    • 2017
  • 빠른 측정시간과 간단한 조작 기능의 장점 때문에 전자파 잔향실이 무선기기 성능 측정에 널리 쓰이고 있다. 본 논문에서는 전자파 잔향실 송수신용 및 보정용으로 쓰일 수 있는 10:1 광대역 역원뿔형(inverse conical) 안테나를 제안한다. 기존 전자파 잔향실에서 주로 사용하는 디스콘 안테나는 대역폭 제한으로 인해 복수의 디스콘 안테나를 대역 별로 교체해 가며 측정해야 하는 번거로움이 있다. 제안된 안테나는 빗변에 따라 임피던스가 선형적으로 변하는 역원뿔 구조를 방사체로, 전자파 잔향실의 금속 벽면 구조를 접지면으로 활용해 광대역 임피던스 매칭 및 전방향성 방사 특성을 갖는다. 3차원 전파 시뮬레이션 소프트웨어로 최적화된 안테나 모델을 3차원 프린터를 이용해 제작하여 측정한 결과, 목표 동작주파수 대역인 0.65~7 GHz에서 반사계수가 -10dB 이하, 방사효율이 70% 이상임을 확인할 수 있었다.

기총 폭발 하중에 대한 모델 수립과 구조 해석에 관한 연구 (A Study on Model Establishment and Structural Analysis for Gun Blast Load)

  • 김대관;한재흥;장재호
    • 한국항공우주학회지
    • /
    • 제33권7호
    • /
    • pp.33-39
    • /
    • 2005
  • 총구로부터 방출되는 폭발파에 대한 수학적 모델(GUNBLAST)을 수립하였으며, 폭발 하중에 대한 구조 응답 해석을 수행하였다. 폭발파는 자유영역 폭발파와 반사 폭발파로 구분되어질 수 있다. 본 연구에서는 스케일 기법을 이용하여 자유영역 폭발파 모델을 수립하였으며, 경사 충격파 이론과 전산유체역학(Computational Fluid Dynamics) 계산을 통하여 반사 충격파를 계산하였다. GUNBLAST는 두 가지의 구조 모델에 적용되었으며 구조 표면으로부터의 총구거리 변화에 따른 폭발파 특성을 파악하기 위하여 평판에 대한 적용을 통하여 균일하중조건과의 비교를 수행하였다. 또한 MSC/NASTRAN을 이용하여 12.7mm 기총을 장착한 비행기 날개 모델의 과도 응답 해석을 수행하였다. 결과적으로 이러한 폭발파는 랜덤진동과 항공기에 탑재된 장비에 고주파의 손상을 일으킬 수 있음을 확인하였다.

램프(Ramp)의 공간적 유형과 특성에 관한 연구 (A Study on the Spatial types and characteristics of Ramp)

  • 이선영;이형근
    • 한국실내디자인학회논문집
    • /
    • 제16권3호
    • /
    • pp.38-45
    • /
    • 2007
  • In the architectural space of modem age, expanding to the vertical and horizontal direction for the interaction between space and space is becoming an indispensable factor, and in this expansion, ramps are being positioned as one of the important factors. With an increased use of ramps, they show a variety of changes in types, functions and even concepts. The space where modem ramps are used exhibits a phenomenon that accommodates and expands many functions as well as the confined function of moving people, and is widening the scope of recognition on the functions of ramp. In addition, this phenomenon can be seen as an architectural reflection on the complexation trend of the modem society, the components comprising a ramp contact the body of experiencers closely and thus have a direct effect on their behavior or feeling, and owing to this, it is a space where new functions and meaning are highly likely to be derived. In this study, spaces where ramps are used stay away from an element of uniform vertical movement but have an independent environment within the entire space, thereby being used as a space dominating the nature of the building, not a subsidiary element of it. In this study, therefore, it could be known that spaces in which ramps are used are different in their meaning according to the patterns, not as an element of uniform vertical movement. In addition, these conclusions are the results by analyzing the patterns of ramps taking place in modem spaces and are thought to be helpful in understanding spaces where ramps are used.

소규모 항만 구조물 주변에서 불규칙파에 대한 SWASH 모형의 반사 및 회절 (Characteristic of Wave Diffraction and Reflection for Irregular Waves in SWASH Model Around Small Port Structures)

  • 권경환;박창욱;박일흠;김종훈
    • 한국해안·해양공학회논문집
    • /
    • 제31권6호
    • /
    • pp.468-477
    • /
    • 2019
  • 불규칙파에 의한 정온도 평가 시 주로 사용하는 Boussinesq 근사의 수치모형은 항의 개구부 폭이 약 30 m 내외의 좁은 마리나와 같은 소규모 항만에서는 격자 크기의 적용성 한계가 있고, 항 내로 진행하는 파의 회절에 대한 평가 시 정확한 정온도 평가가 어려울 수 있다. 본 연구에서는 정수면의 비정수압 항이 고려되어 해수면과 바닥층에서의 유속으로 계산하는 비선형 천수방정식 모형인 SWASH 모형(Zijlema and Stelling, 2005)을 사용하여 좁은 항의 개구부에서 정온도 평가의 적용성을 검토하였다. SWASH 모형은 구조물 및 지형에 입사하는 반사파 적용 시 수심과 공극율 계수 및 구조물 크기에 따라 부분 반사를 제어한다. 본 연구에서는 실제 구조물 단면 형태에 따른 구조물 전면에서의 반사파의 평가와 단면의 형태 및 구조물의 형태에 따라 반사율 적용성을 검토하였다. 항 내에 진입하는 회절 파랑에 의한 모델의 재현성을 평가하기 위해 구조물 직각 및 경사로 입사하는 영역을 구성하여 기존의 Goda et al.(1978)가 제시한 회절도 이론값과 비교하였다. 수심평균으로 계산된 단면 구조물 반사율 실험 결과는 Stelling and Ahrens(1981)이 제시한 반사율의 개략치와 유사한 반사율을 나타내며, 경계에서의 반사파의 제어와 구조물의 형상 및 지형에 따라 반사파가 잘 재현되는 것으로 판단된다. 회절도 검토 결과 파랑 진입 각도 및 회절파의 형태가 계산치가 이론값과 아주 유사하게 나타나지만, 경사 입사 및 직각 입사 모두 방향 집중도가 작은 경우 파고비가 0.5~0.6인 일부 구간에서 회절도가 저평가되는 것으로 나타났다.