• The Korean Journal of Cytopathology
• /
• v.18 no.2
• /
• pp.143-152
• /
• 2007

Sono-guided fine needle aspiration (FNA) of the thyroid is widely used, but the aspirated samples are typically not well preserved and low cellularity makes diagnosis difficult in many cases. The object of the current study is to evaluate the adequacy and diagnostic accuracy of the use of $SurePath^{TM}$ liquid-based cytology (SP-LBC) in the sonoguided fine needle aspiration of the thyroid nodule and to compare its use with that of the use of a conventional smear (CS). A total of 172 sono-guided FNAs of thyroid nodules from April to June, 2006 were prepared by the use of the split method with either SP-LBC or CS; the samples were stained with the use of hematoxylin-eosin (H&E) and Papanicolaou (Pap) stains. A cyto-histological correlation was performed in 69 (30 SP and 39 CS) cases that had been histologically confirmed. The rate of producing unsatisfactory slides by the use of the SP-LBC method (9.3%) was less than that of the use of the CS method (20.9%). The diagnostic accuracy of the SP method (93.3%) was better than that of the CS method (85.3%). The sensitivity and specificity of the SP method (94.4% and 92.3%) was better than that of the CS method (83.3% and 70%), respectively (p < 0.05). The CS of sono-guided aspirated specimens had some unavoidable limitations related to inadequate sampling such as a bloody background, low cellularity and an indication that some clinicians smeared many useless slides (averaging four to ten slides), and that most slides showed only blood that included few follicular cells. The SP method resulted in more thinly smeared slides and showed cleaner background and greater cellularity than the use of the CS method. Each follicular cell shows superior nuclear detail, and more distinct cytoplasmic features than with the use of the CS method. SP-LBC appears to be an easy, highly accurate, and reliable cytological method for employ for a diagnostic approach of thyroid disease and thyroid nodules. The SP-LBC method is a suitable alternative to the CS method to overcome diagnostic difficulties.

• 재활복지
• /
• v.21 no.3
• /
• pp.129-146
• /
• 2017

In an event of an emergency, such as fire in a building, visually impaired and blind people are prone to exposed to a level of danger that is greater than that of normal people, for they cannot be aware of it quickly. Current fire detection methods such as smoke detector is very slow and unreliable because it usually uses chemical sensor based technology to detect fire particles. But by using vision sensor instead, fire can be proven to be detected much faster as we show in our experiments. Previous studies have applied various image processing and machine learning techniques to detect fire, but they usually don't work very well because these techniques require hand-crafted features that do not generalize well to various scenarios. But with the help of recent advancement in the field of deep learning, this research can be conducted to help solve this problem by using deep learning-based object detector that can detect fire using images from security camera. Deep learning based approach can learn features automatically so they can usually generalize well to various scenes. In order to ensure maximum capacity, we applied the latest technologies in the field of computer vision such as YOLO detector in order to solve this task. Considering the trade-off between recall vs. complexity, we introduced two convolutional neural networks with slightly different model's complexity to detect fire at different recall rate. Both models can detect fire at 99% average precision, but one model has 76% recall at 30 FPS while another has 61% recall at 50 FPS. We also compare our model memory consumption with each other and show our models robustness by testing on various real-world scenarios.

• Journal of Internet Computing and Services
• /
• v.16 no.1
• /
• pp.47-55
• /
• 2015

Recently, the environment of a hospital information system is a trend to combine various SMART technologies. Accordingly, various smart devices, such as a smart phone, Tablet PC is utilized in the medical information system. Also, these environments consist of various applications executing on heterogeneous sensors, devices, systems and networks. In these hospital information system environment, applying a security service by traditional access control method cause a problems. Most of the existing security system uses the access control list structure. It is only permitted access defined by an access control matrix such as client name, service object method name. The major problem with the static approach cannot quickly adapt to changed situations. Hence, we needs to new security mechanisms which provides more flexible and can be easily adapted to various environments with very different security requirements. In addition, for addressing the changing of service medical treatment of the patient, the researching is needed. In this paper, we suggest a dynamic approach to medical information systems in smart mobile environments. We focus on how to access medical information systems according to dynamic access control methods based on the existence of the hospital's information system environments. The physical environments consist of a mobile x-ray imaging devices, dedicated mobile/general smart devices, PACS, EMR server and authorization server. The software environment was developed based on the .Net Framework for synchronization and monitoring services based on mobile X-ray imaging equipment Windows7 OS. And dedicated a smart device application, we implemented a dynamic access services through JSP and Java SDK is based on the Android OS. PACS and mobile X-ray image devices in hospital, medical information between the dedicated smart devices are based on the DICOM medical image standard information. In addition, EMR information is based on H7. In order to providing dynamic access control service, we classify the context of the patients according to conditions of bio-information such as oxygen saturation, heart rate, BP and body temperature etc. It shows event trace diagrams which divided into two parts like general situation, emergency situation. And, we designed the dynamic approach of the medical care information by authentication method. The authentication Information are contained ID/PWD, the roles, position and working hours, emergency certification codes for emergency patients. General situations of dynamic access control method may have access to medical information by the value of the authentication information. In the case of an emergency, was to have access to medical information by an emergency code, without the authentication information. And, we constructed the medical information integration database scheme that is consist medical information, patient, medical staff and medical image information according to medical information standards.y Finally, we show the usefulness of the dynamic access application service based on the smart devices for execution results of the proposed system according to patient contexts such as general and emergency situation. Especially, the proposed systems are providing effective medical information services with smart devices in emergency situation by dynamic access control methods. As results, we expect the proposed systems to be useful for u-hospital information systems and services.

• The Korean Journal of Air & Space Law and Policy
• /
• v.2
• /
• pp.31-67
• /
• 1990

One of the first issues which arose in the evolution of air law was the determination of the vertical limits of airspace over private property. In 1959 the UN in its Ad Hoc Committee on the Peaceful Uses of Outer Space, started to give attention to the question of the meaning of the term "outer space". Discussions in the United Nations regarding the delimitation issue were often divided between those in favour of a functional approach ("functionalists"), and those seeking the delineation of a boundary ("spatialists"). The functionalists, backed initially by both major space powers, which viewed any boundary as possibly restricting their access to space(Whether for peaceful or military purposes), won the first rounds, starting with the 1959 Report of the Ad Hoc Committee on the Peaceful Uses of Outer Space which did not consider that the topic called for priority consideration. In 1966, however, the spatialists, were able to place the issue on the agenda of the Outer Sapce Committee pursuant to Resolution 2222 (xxx1). However, the spatialists were not able to present a common position since there existed a variety of propositions for delineation of a boundary. Over the years, the funtionalists have seemed to be losing ground. As the element of location is a decisive factor for the choice of the legal regime to be applied, a purely functional approach to the regulation of activities in the space above the Earth does not offer a solution. It is therefore to be welcomed that there is clear evidence of a growing recognition of the defect inherent to such an approach and that a spatial approach to the problem is gaining support both by a growing number of States as well as by publicists. The search for a solution of the problem of demarcating the two different legal regimes governing the space above the Earth has undoubtedly been facilitated, and a number of countries, among them Argentina, Belgium, France, Italy and Mexico have already advocated the acceptance of the lower boundary of outer space at a height of 100km. The adoption of the principle of sovereignty at that height does not mean that States would not be allowed to take protective measures against space activities above that height which constitute a threat to their security. A parallel can be drawn with the defence of the State's security on the high seas. Measures taken by States in their own protection on the high seas outside the territorial waters-provided that they are proportionate to the danger-are not considered to infringe the principle of international law. The most important issue in this context relates to the problem of a right of passage for space craft through foreign air space in order to reach outer space. In the reports to former ILA Conferences an explanation was given of the reasons why no customary rule of freedom of passage for aircraft through foreign territorial air space could as yet be said to exist. It was suggested, however, that though the essential elements for the creation of a rule of customary international law allowing such passage were still lacking, developments apperaed to point to a steady growth of a feeling of necessity for such a rule. A definite treaty solution of the demarcation problem would require further study which should be carried out by the UN Outer Space Committee in close co-operation with other interested international organizations, including ICAO. If a limit between air space and outer space were established, air space would automatically come under the regime of the Chicago Convention alone. The use of the word "recognize" in Art. I of chicago convention is an acknowledgement of sovereignty over airspace existing as a general principle of law, the binding force of which exists independently of the Convention. Further it is important to note that the Aricle recognizes this sovereignty, as existing for every state, holding it immaterial whether the state is or is not a contracting state. The functional criteria having been created by reference to either the nature of activity or the nature of the space object, the next hurdle would be to provide methods of verification. With regard to the question of international verification the establishment of an International Satelite Monitoring Agency is required. The path towards the successful delimitation of outer space from territorial space is doubtless narrow and stony but the establishment of a precise legal framework, consonant with the basic principles of international law, for the future activities of states in outer space will, it is still believed, remove a source of potentially dangerous conflicts between states, and furthermore afford some safeguard of the rights and interests of non-space powers which otherwise are likely to be eroded by incipient customs based on at present almost complete freedom of action of the space powers.

• Korean Journal of Construction Engineering and Management
• /
• v.19 no.2
• /
• pp.15-24
• /
• 2018

Despite the recognition of the need for productivity information and its importance, the feedback of productivity information is not well-established in the construction industry. Effective use of productivity information is required to improve the reliability of construction planning. However, in many cases, on-site productivity information is hardly management effectively, but rather it relies on the experience and/or intuition of project participants. Based on the literature review and expert interviews, the authors recognized that one of the possible solutions is to develop a systematic approach in dealing with productivity information of the construction job-sites. It is required that the new system should not be burdensome to users, purpose-oriented information management, easy-to follow information structure, real-time information feedback, and productivity-related factor recognition. Based on the preliminary investigations, this study proposed a framework for a novel system that facilitate the effective management of construction productivity information. This system has utilized Sketchup software which has good user accessibility by minimizing additional data input and related workload. The proposed system has been designed to input, process, and output the pertinent information through a four-stage process: preparation, input, processing, and output. The inputted construction information is classified into Task Breakdown Structure (TBS) and Material Breakdown Structure (MBS), which are constructed by referring to the contents of the standard specification of building construction, and converted into productivity information. In addition, the converted information is also graphically visualized on the screen, allowing the users to use the productivity information from the job-site. The productivity information management system proposed in this study has been pilot-tested in terms of practical applicability and information availability in the real construction project. Very positive results have been obtained from the usability and the applicability of the system and benefits are expected from the validity test of the system. If the proposed system is used in the planning stage in the construction, the productivity information and the continuous information is accumulated, the expected effectiveness of this study would be conceivably further enhanced.

• Journal of Engineering Education Research
• /
• v.10 no.2
• /
• pp.73-86
• /
• 2007

The purpose of this study is to suggest directions to improve engineering education and the assessment system of our country. For this object, the present situation of engineering education and assessment system in Korea have been reviewed and next, for those of study, the research papers and publications about the environment of college education are analyzed. Finally, an improved assessment system is suggested. It has already passed out for 6 years since execute the accreditation for engineering education in our country now, but essential point for step in accreditation for engineering education is how the evaluator can make the outcomes of studying. This is not a new terminology that is deformed according to special quality of college of engineering which prefer out-come based of study than process based of study to mean accomplishment in engineering education. The evaluation that estimate program is a skill, but an assessment method is not the meaning of individual student accomplishment also, it is the measure of validity estimation that should be estimate ability of students who complete program by proper authority. However, a new evaluation strategy that assess student outcome by person who consider the objectivity and validity, reliability should be develop for decision making of ABEEK. It is an original, private discussion for assessment strategy about the method for student learning outcomes assessment.

• Archives of design research
• /
• v.17 no.2
• /
• pp.383-392
• /
• 2004

Analysis on Kandinsky's Work as a Case Study of Art Therapy. This study attempts to analyze a work of W. Kandinsky, who placed great emphasis on the relationship between the form and the color of an object, from the viewpoint of art therapy. Most papers related with fine art work analysis approach it from the aesthetical point of view and there are few attempts to interpret art works in terms of art therapy. This study tries to present a new angle to the studies of art therapy Practiced up to now and research is made on its potentiality. With an analysis on the relationship between human psychology, and color and form that convey visual language, research is made on the feasibility of art therapeutic methods through the approaches based on color psychology, Gestalt theory and perception psychology. The final purpose of this study is to apply the results to the development of illustrations, education program for children, and educational instruments and toys that will promote children's healthy emotional growth based on the color psychology and the form psychology of human being. As an initial study, a piece of Kandinsky's work, titled ' CERCLES DANS CERCLE', is analyzed as a case study of art therapy both from theoretical standpoint and from the viewpoint of art therapy. Through this effort, it can be utilized as a new case study of art therapy that will influence human emotion positively and lead to healthful emotional catharsis.

• Journal of Digital Convergence
• /
• v.16 no.2
• /
• pp.117-126
• /
• 2018

The threat to information security is growing globally. To this, organizations are increasing the weight of adapting and operating the more specialized information security policy and system. Information security requires participation from the employees who execute the security system and policy, and to increase the level of organization's internal security, requires organization's systematic support to improve employees' information security compliance intention. This research finds the mechanism for improving employee's information security compliance intention by applying justice theory and goal setting theory in information security. We use structural equation modeling to verify the research hypothesis, and conducted a survey on the employees of organization with information security policy. In other words, this research performs verification of the research model based hypothesis which claims that security policy goal setting has positive influence on employee's level of security related justice recognition, and claims that justice has positive influence on compliance intention. The object of study is the employees of the organization that adapts information security policy, and 383 valid samples were collected via survey. Structural equation modeling was performed to verify the research hypothesis. The result shows that security policy goal factor (goal difficulty, goal specificity) improves employee's security related justice recognition, and that security related justice (distribution, process, and information justice) has positive influence on compliance intention. The result suggests the strategic approach directions for improving employees' compliance intention on organization's security policy.

• Tunnel and Underground Space
• /
• v.30 no.5
• /
• pp.462-472
• /
• 2020

Rock classification is fundamental discipline of exploring geological and geotechnical features in a site, which, however, may not be easy works because of high diversity of rock shape and color according to its origin, geological history and so on. With the great success of convolutional neural networks (CNN) in many different image-based classification tasks, there has been increasing interest in taking advantage of CNN to classify geological material. In this study, a feasibility of the deep CNN is investigated for automatically and accurately identifying rock types, focusing on the condition of various shapes and colors even in the same rock type. It can be further developed to a mobile application for assisting geologist in classifying rocks in fieldwork. The structure of CNN model used in this study is based on a deep residual neural network (ResNet), which is an ultra-deep CNN using in object detection and classification. The proposed CNN was trained on 10 typical rock types with an overall accuracy of 84% on the test set. The result demonstrates that the proposed approach is not only able to classify rock type using images, but also represents an improvement as taking highly diverse rock image dataset as input.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.1
• /
• pp.155-162
• /
• 2016

In recent years, hoping the interaction of individuals and rather than software development process and tools, and customers want software that works first, rather than a comprehensive document, in cooperation with the customer, rather than the developer negotiate a contract, to each other stick to the plan I think even more so than the value that corresponds to the change. In view of this, software development is given the autonomy and motivation to project team rather than process-oriented and have a passion and vision and human relations oriented management approach is required. In recent years, increasing the productivity benefits of agile development processes, improved quality, efficiency and customer satisfaction as is demonstrated in the methodology selected to promote the project, attention was given to the experts. Contemporary demands with regard to the methodology chosen to meet your needs, in this paper in the organization, and to solve the problems of product-based Cross functional team proposed methodology Feature Team model, this model is an organizational Cross functional team and the team is not the outcome (product) basis, were examined for the model that points to progress the development across multiple product as a functional unit, value-plan through the driven agile technique-based model and proposed a difference. And the domain analysis, required extraction by conventional JAD (joint application development) meeting the targets for the object-oriented modeling, in modeling and organize, review, aware in advance and the UML Structure and Behavior Diagrams and proposed to proceed with the project.