• Journal of the Korean GEO-environmental Society
• /
• v.24 no.11
• /
• pp.5-10
• /
• 2023

Slag-CB is widely used in various fields that require groundwater control. It is a type of CB where a portion of the cement mixed with CB is replaced with GGBS. In general, Slag-CB has the advantage of long-term improvement in compressive strength, permeability, durability, and chemical resistance as the GGBS replacement ratio increases. However, there are problems such as decreased flexibility and resistance to deformation of the cut-off walls, as well as brittleness upon failure. To address these problems, some quality standards recommend designing Slag-CB with lower strength, which makes it challenging to apply high-strength Slag-CB with a high GGBS replacement ratio in the field.In this study, we aimed to improve the flexibility and resistance to deformation of Slag-CB to prevent brittle failure and improve the field applicability of Slag-CB. To achieve this, we evaluated the compressive behavior of nylon fiber-reinforced Slag-CB and proposed measures for enhancing the flexibility and resistance to deformation of Slag-CB.

• Fibers and Polymers
• /
• v.5 no.4
• /
• pp.280-288
• /
• 2004

Split-type nylon/polyester microfiber and polyester microfiber fabrics possess drapeability, softness, bulkiness, and smoothness, so that they can be applied in various industrial fields. In particular, these fabrics are able to absorb various organic solvents, and can be used as clean room materials. To investigate the chemical affinity between solvents and the compositional materials of these fabrics, the contact angle of thermally pressed film fabrics was measured with different solvents. The thermally pressed nylon/polyester fabric films showed a chemical attraction to formamide. The sorption properties of the microfiber fabrics were investigated using a real time testing device, and these tests showed that the sorption behavior was more influenced by the structure of the fibrous assembly than by any chemical attraction. The effect of the fabric density, specific weight, and sample structure on the sorption capacity and rate was examined for various organic solvents. The sorption capacity was influenced by the density and the specific weight of the fibrous assembly, and knitted fabric showed a higher sorption capacity than woven fabric. However, the sorption rate was less affected in lower viscosity solvents. On applying Poiseuille's Law, the lower viscosity solvents showed higher initial sorption rates, and more easily penetrated into the fibrous assembly.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.6
• /
• pp.92-98
• /
• 2019

In this study, we developed a repair material incorporating PVA powder resin and nylon fiber into cemented carbide used in the existing field to improve adhesion performance and water tightness with existing concrete. Flexural behavior evaluation was performed. The main experimental variables were PVA powder resin, nylon fiber mixing rate and damage type, and performance tests were conducted to evaluate compressive strength and flexural behavior after repairing materials. It was found that all formulations fully satisfied the required performance of the repair material. The flexural strength test results of the repaired tube specimens showed that the performance of the repaired materials was maximized when the nylon fiber was added and the PVA powder was added in an appropriate amount. The flexural behavior of all the specimens showed the flexural behavior of the structural members with a low rebar ratio, suggesting that the amount of iron wire in the domestic fume pipe was somewhat insufficient. That is, it was confirmed that the amount of reinforcement of the steel wire was somewhat small, so that the concrete was cracked before the behavior of the concrete and the steel wire reached the extreme state, and the concrete was immediately destroyed beyond the tensile strength of the concrete.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.6
• /
• pp.3990-3996
• /
• 2014

Because the physical properties can be decreased when a Nylon 66/glass fiber composite is injected into a mold over $300^{\circ}C$, a systematic study of the thermal history in the case of re-use is needed. Nylon 66/glass fiber extrudates as a function of the extrusion number were prepared using a twin screw extruder at 305/290/273/268/265/$260^{\circ}C$. The chemical structure, thermal properties, melt index, crystal structure, Izod impact strength, and rheological properties were measured by Fourier transform infra-red (FT-IR), melt indexer, DSC, TGA, XRD, Izod impact tester, and dynamic rheometer. The FT-IR spectra indicated that the number of extrusions did not affect the chemical structure. The decrease in molecular weight with increasing extrusion number was confirmed by the melt index and the complex viscosity of extrudates. Based on the DSC and TGA results, the thermal history had no effect on the melting temperature, regardless of the number of extrusions, but the degradation temperature decreased up to $20^{\circ}C$ with increasing extrusion number. The Izod impact strengths of the extrudates were found to decrease with increasing extrusion number. No structural change after extrusion was also confirmed because there was no change in the slope and shape of the G'-G" plot.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.10
• /
• pp.1467-1477
• /
• 2002

This study was investigated physical properties of stretch fabrics by KES-FB system to show suitable basic data to making skirts of excellent capacity and develop more organized basic skirt pattern by fitness evaluation. 1. The results of T. H. V.(Total Hand Value) were as followa: In the kind of blending fiber, cotton/spandex was more excellent than nylon/spandex and polyester/spandex, in the direction of stretch, one-way(weft inserted polyurethan yarn) polyester/spandex and cotton/spandex were higher than two-way(warp and wet inserted polyurethan yarn) polyester/spandes and cotton/spandex, two-way nylon/spandex was higher than one-way nylon/spandex. 2. The results of calculating the variance between sample stretch fabrics and Japanese s/s women's suit fabrics after standardizing were as follows: Stretch fabrics has 2 range of tensile, bending, shearing, compression, surface, thickness and weight as compared with Jpanese s/s women's suit fabrics. In the tensile property, one-way stretch fabrics were almost the same with Japanese s/s women's suit fabrics, only two-way polyester/spandex had+1～+2 range. In the bending, shear property, there was no difference between sample fabrics and Japanese s/s women's suit fabrics 3. In the total fitness of the skirt, nylon/spandex is the best in the fabrics and one-way stretch fabric is better than two-way strethch fabric.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.35 no.4
• /
• pp.431-441
• /
• 2011

Microbial colorants produced from Zooshikella sp. were developed as a reddish dye for fabrics. The reddish colorants were extracted from cell mass of Zooshikella sp. using 100% ethanol and were identified as prodiginine by 1H-NMR and FT-IR analysis. Microbial prodiginine had a maximum spectrophotomatric absorbance at 530nm and were chemically stable and 30 to $60^{\circ}C$. The microbial prodiginine could dye natural fibers such as cotton, silk, and wool as well as synthetic fibers such as nylon. The maximum K/S values of the dyed fiber were shown at 540 run with a color appearance of RP (reddish purple). Silk and nylon had an excellent dyeability among the experimental fibers. The optimum pH for the dyeing of experimental fibers was at pH 3.0 and dyeability was improved as the temperature increased. The cover change of dyed multifiber fabrics with the microbial prodiginine were measured after washing with detergents and a dry cleaning solvent for the selection of a proper fabric against microbial prodiginine. Among the experimental fibers, silk and nylon did not show significant color change after washing. Therefore, under the criteria of dyeability, silk and nylon were excellent fabrics for being dyed by microbial prodiginine.

• Textile Coloration and Finishing
• /
• v.26 no.4
• /
• pp.331-338
• /
• 2014

In this research, split-type complex yarn of 20:80, 40:60, 50:50 nylon6/polyester composition ratio was used in order to impose unique sense on split-type complex woven. After treating both split-type complex yarn of each ratio and its produced woven in alkali solution, we got the following results by checking physical properties based on alkali proportion and treatment time. Under the condition of NaOH 20% in this experiment, it took approximately double time 20% loss of weight. The loss of weight became high when polyester proportion of N/P(nylon6/polyester) composition ratio was low, in the same fineness yarn. Even though polyester proportion was low, the loss of weight was low when the fineness was high. N/P division was well processed at about 25% loss of weight under the condition of NaOH 20%, treatment temperature $50^{\circ}C$, and treatment time 60 minutes. The research provides that the loss of weight should be processed around treatment time 24 hours in the case of NaOH concentration 15%, and treatment time 15 hours in the case of NaOH concentration 18%, respectively, in order to achieve N/P woven division ratio of about 70%-80% in industrial fields.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.11a
• /
• pp.186-187
• /
• 2014

Flexural stress and fracture energy of fiber reinforced cementitious composites is increased by bridge effect of reinforced fiber, scabbing failure is restrained. Shape, properties of fiber were SF(steel fiber), PA(polyamide), NY(nylon) have effects on flexural stress and fracture energy, impact resistance improve of fiber reinforced cementitious composites. In this study, local failure properties by impact of high velocity projectile was analyzed by mixing 3 types of fiber which have different shape and properties respectively.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.11a
• /
• pp.745-748
• /
• 2006

This study investigates the fundamental properties and examines spalling appearances and residual compressive strength of high strength concrete containing hybrid organic fibers subjected to fire. Test showed that overall, an increase of fiber content decreased the fluidity of concrete, but specimens containing polyvinyl alcoho(PVA)+polypropylene(PP) fiber and nylon(NY)+PP fiber had improved flow. In addition, the air content of all specimens was properly ranged in target value, regardless of fiber content. As for the spalling properties when completed the fire test, control concrete exhibited spalling occurrence due to sudden elevated temperature. However, specimens containing more than 0.1 vol% of PP fiber prevented the spalling, while specimens containing PP+CL and PVA+PP fiber can protected from fire in more than 0.15vol% of the fiber content. Importantly, a specimen containing only 0.05vol% of NY+PP showed the favorable spalling resistance performance.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.6
• /
• pp.1023-1030
• /
• 2001

The tensile properties of short nylon6 fiber reinforced NR and SBR have been investigated as functions of diameter ratio(DR), interphase condition, fiber aspect ratio(AR), and fiber content. The short-fiber(DR=3 and AR=2) reinforced SBR did not show the dilution effect for all interphase conditions. And the short-fiber(DR=3 and AR=2) reinforced NR did not show the dilution effect except for the no-coating. The better interphase condition, the lower dilution effect at same DR. The tensile moduli are significantly improved due to fiber content and diameter ratio at same interphase condition. The pull-out force increased with the DR. The better interphase condition, the higher pull-out force at same DR. It is found that the DR and AR have an important effect on tensile properties.