• 한국염색가공학회지
• /
• 제28권4호
• /
• pp.231-238
• /
• 2016

We investigated the evolution of crystal formation as a function of drawing ratio in poly(1,4-diaminobutane-co-adipic acid-co-${\varepsilon}$-caprolactam-co-diethylenetriamine)(nylon 466T) copolymer formed by four monomers, i.e 1,4-diaminobutane, adipic acid, ${\varepsilon}$-caprolactam, diethylenetriamine(DETA), using synchrotron X-ray scattering measurement. In case of pristine(as spun) nylon 466T fiber, it was consisted with unoriented nylon $6{\alpha}$ and unoriented nylon $46{\alpha}$ phases. As increase the drawing ratio, unoriented nylon $6{\alpha}$ was transformed to oriented ${\gamma}$ phase, while unoriented nylon $46{\alpha}$ changed to oriented $46{\alpha}$ phase. The effect of the addition of DETA was not observed in the pristine fibers. However, DETA affected to restrict the formation of crystals at the maximum drawing condition, and as a result it had a role to increase the moisture regain.

• 한국염색가공학회지
• /
• 제13권2호
• /
• pp.1-1
• /
• 2001

In the Previous studies, we reported about the synthesis of poly[3-methylence-3-methylenesodiumbisulfite-bis(4-hydroxypheny)sulfone] (PMSBPS) and their effect on the staining of direct dye on nylon in the dyeing of nylon/cotton union. The results showed that PMSBPS have good staining resist effect on nylon in the dyeing of nylon/cotton union. In this study, the staining resist effects of PMSBPS in varied dyeing process and method were investigated, and the fastness to washing, light, and rubbing of the deed N/C unions was tested. The results are as follows ; 1. In the two bath two step method, the staining of direct dye on nylon was decreased with the concentration of PMSBPS, and the fastness to washing, light, and rubbing of the dyed N/C unions were increased by addition of PMSBPS. 2. In the one bath two step method, optimun concentration of PMSBPS was 4% 0.w.f..

• 한국염색가공학회지
• /
• 제13권2호
• /
• pp.87-92
• /
• 2001

In the Previous studies, we reported about the synthesis of poly(3-methylence-3-methylenesodiumbisulfite-bis(4-hydroxypheny )sulfone] (PMSBPS ) and their effect on the staining of direct dye on nylon in the dyeing of nylon/cotton union. The results shoved that PMSBPS have good staining resist effect on nylon in the dyeing of nylon/cotton union. In this study, the staining resist effects of PMSBPS in varied dyeing process and method were investigated, and the fastness to washing, light, and rubbing of the deed N/C unions was tested. The results are as follows , 1. In the two bath two step method, the staining of direct dye on nylon was decreased with the concentration of PMSBPS, and the fastness to washing, light, and rubbing of the dyed N/C unions were increased by addition of PMSBPS. 2. In the one bath two step method, optimun concentration of PMSBPS was 4% 0.w.f..

• 한국의상디자인학회지
• /
• 제16권1호
• /
• pp.117-123
• /
• 2014

This paper examined dyeing using sulfur dye with nylon and the characteristics of high gauge knitting for generating high functionality including light weight, wind resistance and elasticity using fine nylon threads. Yarn tension, stitch field and knitting speed of high and fine gauge knitting were measured. The influence of reducing agents on sulfur dye, optimum dyeing conditions and fastness features in nylon dyeing were analyzed. The analysis results are presented below. When nylon (Hyoseong, 40d/34f) and spandex (Hyoseong, 20d) for use as hosiery yarn were used to knit high gauge and flat weave, 44 gauge, the effective knitting conditions were a stitch field over 8.2cm in 1 course length, yarn tension of less than 5g and knitting speed below 18rpm. Nylon dyeing using sulfur dye showed effective results when a rongalite reducing agent was used at more than 10% o.w.f. and dyeing was maintained at $98^{\circ}C$ for 30 minutes. For dyeing nylon and spandex composite using sulfur dye, color fastness in washing, water, daylight and friction were higher than Class 4 or 5, which indicated a superior property. The analysis results verified that the existing problems in nylon dyeing could be solved by using sulfur dyes that don't use heavy metals due to superior fastness and therefore quality, high gauge nylon knit products could be produced.

• 복식
• /
• 제58권1호
• /
• pp.1-8
• /
• 2008

The purpose of this study was to investigate the mechanical properties and hand values of polypropylene knit and to analyze its color-fastness for light, laundering and abrasion, comparing to nylon and polyester knits. The results of this study were as follows: 1. Polypropylene stretched more with less force than nylon and polyester and its elastic recovery and shape stability were better than nylon and polyester. 2. Polypropylene was more flexible than nylon and polyester. 3. Polypropylene stretched more easily for shearing but its recovery from shearing was less than nylon and polyester. 4. Polyester had smoother surface than nylon and polyester. 5. Polypropylene was compressed more easily than polyester with less force but less than nylon. Its recovery from compression was more than nylon and polyester. 6. Polypropylene had lower KOSHI and SHARI values and higher FUKURAMI value than nylon and polyester. It had better T.H.V. value than nylon but less than! polyester. 7. Color fastness of polypropylene for lanudering, light, and abrasion in wet and dry conditions was good except polypropylene dyed with red color.

• 한국의류학회지
• /
• 제22권4호
• /
• pp.469-476
• /
• 1998

The natural dyestuff(chestnut dye) was manufactured from chestnut hulls by boiling in 0.5 NaOH solution and powdering in freeze dryer. To investigate the dyeability and color fastness, cotton, wool, silk and nylon fabrics were dyed under several conditions using the manufactured chestnut dye. Dyeing operation was carried in acidic dyebath of pH 4-5 because the chestnut dye is anionic. Dyeabilities on wool, silk and nylon fabrics were good, especially nylon fabrics were dyed deeper than others. But dyeability on cotton fabrics was not good. All the dyed fabrics showed excellent color fastness to crocking. Color fastness to laupdering of them were moderate to good. Also light fastness of them were moderate to good except nylon. The light fastness of dyed nylon fabrics was as poor as grade 1. But they could be improved to grade 4 by aftertreatment with gallic acid.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제26권2호
• /
• pp.146-153
• /
• 2000

The purpose of present study is comparing the effect of Teflon Membrane and Nylon Membrane on bone regeneration in rabbit tibia. The 6 defects of $8{\times}8{\times}5mm$ size were drilled with dental handpiece in rabbit tibia, which on left side as an order of Control group(no coverage), Group 1(Nylon $5{\mu}m$ size), Group 3(Nylon $10{\mu}m$ size), and on right side Control group, Group 2($5{\mu}m$ Teflon), Group 4($10{\mu}m$ Teflon). Animals were killed at 7, 10, 14, 42 days to make specimens and observed the difference of healing potentials with light microscopy. The results were as follows ; 1. New bone formation has taken place at 14 days in Guided Bone Regeneration (GBR) group comparing to the Control group of massive inflammatory status. 2. Larger pore membrane allows more favorable healing potentials. Bone formation started earlier in larger membrane pore groups than smaller groups, until 14 days. 3. Bone forming potentials of Teflon membrane group was higher than Nylon membrane groups, Control group has the lowest bone forming potentials. 4. New bone formation was almost ended in 42 days, and there was no difference of bone formation between Nylon and Teflon membrane group of different size. There was no difference of bone formation at final stage(42 days) between Nylon membrane and Teflon membrane of same pore size. So nylon membrane may be clinically usable in guided bone regeneration case with further studies.

• 한국염색가공학회지
• /
• 제28권4호
• /
• pp.271-279
• /
• 2016

This study deals with antibacterial properties of nylon fiber treated with glycidyltrimethylammonium chloride(GTAC) and silver nanoparticles(AgNPs). Nylon fibers were soaked into GTAC(2-30%, v:v) solution for 20 min. After sample was pre-drying at $80^{\circ}C$ for 10min and cured at $180^{\circ}C$ for 5min. The AgNPs coating was accomplished by soaking in silver colloid solution at $45^{\circ}C$ for 90min. The coated nylon fibers were characterized by scanning electron microscopy-energy dispersive spectroscopy(SEM-EDS). EDS analysis indicated that AgNPs and GTAC was attached on nylon fibers. The treated nylon fibers showed antimicrobial properties against Escherichia coli(ATCC 43895), Pseudomonas aeruginosa(ATCC 13388) and Staphylococcus aureus(ATCCBAA-1707).

• 폴리머
• /
• 제36권4호
• /
• pp.407-412
• /
• 2012

Molded-in-color(MIC) 수지로 사용 가능한 나일론6/이오노머 semi interpenetrating network(IPN)의 물성을 기존 MIC 수지인 나일론6/이오노머 블렌드와 비교하여 살펴보았다. 나일론6/이오노머 semi IPN은 분자 수준의 믹싱인 IPN 구조를 가져 블렌드에 비하여 상대적으로 개선된 homogeneous 형태학적 구조를 가짐에 따라 내스크래칭 특성이 개선됨을 알 수 있었다. 이러한 semi IPN 구조는 나일론6의 결정화 속도를 감소시키며 용융점도의 증가 그리고 점도의 온도 의존성을 감소시켜 블렌드에 비하여 상대적으로 MIC용 사출 가공 특성이 우수해짐을 예측할 수 있었다.

• 공업화학
• /
• 제4권2호
• /
• pp.349-357
• /
• 1993

Hydroxy-difunctional polyarylate(PAR) 올리고머와 toluene diisocyanate를 반응시켜 합성한 고분자 활성체를 사용하여 ${\varepsilon}$-caprolactam을 음이온 중합하여 다양한 블록길이의 PAR-nylon 6 블록공중합체들을 합성하였다. 합성한 블록공중합체들의 열적성질을 differential scanning calorimeter(d.s.c.)로 측정한 결과, 블록공중합체를 구성하는 PAR 블록과 nylon 6 블록은 부분적 상용성을 가졌으며, 그 정도는 블록의 길이가 짧을수록 컸다. PAR-nylon 6 블록공중합체와 PAR 혹은 nylon 6 homopolymer와의 이원블렌드에서 PAR homopolymer와 PAR 블록, nylon 6 homopolymer와 nylon 6 블록 사이의 분자수준의 섞임을 시사하는 거동을 d.s.c.로 관찰할 수 있었다.