• 제목/요약/키워드: nut

검색결과 539건 처리시간 0.021초

초고강도 콘크리트의 인발하중과 압축강도와의 관계 (The Relation between Pullout Load and Compressive Strength of Ultra-High-Strength Concrete)

  • 고훈범;김기태
    • 한국건축시공학회지
    • /
    • 제18권1호
    • /
    • pp.17-24
    • /
    • 2018
  • 비파괴 시험 중 선 매입 인발시험법은 아마도 현장의 콘크리트 압축강도를 평가하기 위해 널리 사용되는 기술이라고 할 수 있다. 인발시험은 콘크리트 타설 전에 특별히 계획된 형태의 철재 봉을 설치하여 콘크리트가 굳은 다음 그 봉을 인발하여 그때의 하중을 측정하여 콘크리트 강도를 평가하는 방법으로 미국과 캐나다에서는 콘크리트 구조물 공사중에 콘크리트 강도를 결정하는 신뢰할 만한 시험법으로 각각 ASTM C 900과 CSA A23.2에 규격화 되어 있다. 직경 12mm볼트에 홈이 파인 파단형 인발 볼트와 인발너트, 그리고 로드셀이 필요 없는 오일유압펌프로 구성된 간이인발시험법을 초고강도 콘크리트 강도를 추정하기 위하여 제안되었다. 인발시험과 간이인발시험의 이점을 검증하기 위하여, 80MPa 및 100MPa 급 두 가지 유형의 콘크리트로 제작된 4개의 시험벽체와 2개의 슬래브를 대상으로 로드셀을 장착한 간이인발시험을 사용하여 인발시험을 실시하였다. 인발하중과 콘크리트 압축강도, 파단형 인발볼트의 파단 여부를 재령 7일까지는 매일, 그리고 14일, 21일, 28일, 90일에 측정하였다. 인발하중과 콘크리트 압축강도의 상관곡선은 매우 높은 신뢰도를 보여주었으며, 따라서 인발시험이 현장에서 구조물의 초고강도 콘크리트 강도를 평가할 수 있다는 것을 확인할 수 있었다. 파단형 인발볼트 직경과 콘크리트 강도와의 관계식으로 y=0.0184+5.4(x=콘크리트 압축강도(MPa), y=파단형 인발볼트 직경(mm))를 제안하였다. 본 연구에서 얻은 결과로 간이인발시험은 유용하며 저비용, 간편성 및 편의성에 대한 가능성이 검증되었다.

Optimization and characterization of biodiesel produced from vegetable oil

  • Mustapha, Amina T.;Abdulkareem, Saka A.;Jimoh, Abdulfatai;Agbajelola, David O.;Okafor, Joseph O.
    • Advances in Energy Research
    • /
    • 제1권2호
    • /
    • pp.147-163
    • /
    • 2013
  • The world faces several issues of energy crisis and environmental deterioration due to over-dependence on single source of which is fossil fuel. Though, fuel is needed as ingredients for industrial development and growth of any country, however the fossil fuel which is a major source of energy for this purpose has always been terrifying thus the need for alternative and renewable energy sources. The search for alternative energy sources resulted into the acceptance of a biofuel as a reliable alternative energy source. This work presents the study of optimization of process of transesterification of vegetable oil to biodiesel using NaOH as catalyst. A $2^4$ factorial design method was employed to investigate the influence of ratio of oil to methanol, temperature, NaOH concentration, and transesterification time on the yield of biodiesel from vegetable oil. Low and high levels of the key factors considered were 4:1 and 6:1 mole ratio, 30 and $60^{\circ}C$ temperatures, 0.5 and 1.0 wt% catalyst concentration, and 30 and 60 min reaction time. Results obtained revealed that oil to methanol molar ratio of 6:1, tranesetrification temperature of $60^{\circ}C$, catalyst concentration of 1.0wt % and reaction time of 30 min are the best operating conditions for the optimum yield of biofuel from vegetable oil, with optimum yield of 95.8%. Results obtained on the characterizzation of the produced biodiesel indicate that the specific gravity, cloud point, flash point, sulphur content, viscosity, diesel index, centane number, acid value, free glycerine, total glycerine and total recovery are 0.8899, 4, 13, 0.0087%, 4.83, 25, 54.6. 0.228mgKOH/g, 0.018, 0.23% and 96% respectively. Results also indicate that the qualities of the biodiesel tested for are in conformity with the set standard. A model equation was developed based on the results obtained using a statistical tool. Analysis of variance (ANOVA) of data shows that mole ratio of ground nut oil to methanol and transesterification time have the most pronounced effect on the biodiesel yield with contributions of 55.06% and 9.22% respectively. It can be inferred from the results various conducted that vegetable oil locally produced from groundnut oil can be utilized as a feedstock for biodiesel production.

부스바 접촉 상태 및 온도 감지 시스템 설계 및 구현 (A Design and Implementation of Busbar Joint and Temperature Measurement System)

  • 이영동;정성학
    • 한국정보통신학회논문지
    • /
    • 제21권2호
    • /
    • pp.379-385
    • /
    • 2017
  • 일반적으로 배전반, 분전반, 전동기제어반(Motor Control Center; MCC)은 집단거주지역, 빌딩, 학교, 공장, 항만, 공항, 상하수 처리장, 변전소, 중공업 플랜트 등의 광범위한 전력 수용가에 설치되어 특고압의 전력을 해당 설비들에 요구되는 전압으로 변환하여 공급하는데 사용된다. 이와 같은 배전반, 분전반, MCC에 포함되는 전기설비의 사고는 부스바 접촉부의 열화에 의한 사고, 부스바의 접점 및 연결 부위에서의 접촉 불량에 의한 사고, 부스바 접촉부의 과열현상에 의한 사고로 구분된다. 본 논문에서는 부스바 접촉부의 볼트 및 너트의 풀림상태, 접촉부 열화 측정이 가능하며, 정밀 가변저항을 이용하여 저항값의 변화에 따라 볼트 체결상태 감지 및 비접촉식 적외선 센서를 사용하여 부스바 접촉부 온도 감지 시스템을 설계하고 구현하였다. 부스바 접촉부 체결상태 감지를 위한 가변저항을 이용한 실험을 수행한 결과 볼트와 너트를 완전히 체결시키면 가변저항 값은 감소하였으며, 최대 오차범위는 0.1mm의 결과를 보였다. 또한, 부스바 접촉 저항값 변화에 따라 접촉부 온도가 $27.3^{\circ}C$에서 $69.3^{\circ}C$로 상승하는 결과를 확인하였다.

주입재료에 따른 Anchor Bar의 인발저항 특성 (Pull-out Resistance Characteristics of the Anchor Bar According to the Grouting Material)

  • 여규권;송영석
    • 지질공학
    • /
    • 제18권2호
    • /
    • pp.227-232
    • /
    • 2008
  • 본 연구에서는 급경사면에 설치되는 여수로를 지탱하기 위한 Anchor bar의 인발저항 특성을 현장실험을 통하여 조사하였다. Anchor bar의 주입재료로 시멘트 모르타르와 시멘트 밀크를 사용하였으며, 조건별 주입재료의 일축압축강도를 측정하였다 측정결과 시멘트 모르타르와 시멘트 밀크는 물시멘트비가 증가함에 따라 일축압축강도가 감소하며, 재령일이 증가함에 따라 일축압축강도가 증가한다. 한편, 동일한 물시멘트비와 재령일을 가질 경우 시멘트 밀크의 일축압축강도가 시멘트 모르타르의 압축강도보다 더 큼을 알 수 있다. 현장에서 Anchor bar의 인발시험시 편심이 작용되지 않도록 하기 위하여 너트형태의 철근 고정커플링을 Anchor bar에 삽입하여 설치장비를 개선시켜 시험을 실시하였다. Anchor bar의 인발시험결과 시멘트 밀크의 경우 강도발현은 재령초기에 크게 발생되는 반면 시멘트 모르타르의 경우 재령일자가 지남에 따라 강도발현이 증가하였다. 따라서 Anchor bar의 신속한 시공을 위해서는 강도발현이 재령초기에 크게 발생되는 시멘트 밀크를 주입재료로 사용하는 것이 바람직하다.

문맥종속 화자인식을 위한 준비반복 벡터 양자기 설계 알고리즘 (A Semi-Noniterative VQ Design Algorithm for Text Dependent Speaker Recognition)

  • 임동철;이행세
    • 정보처리학회논문지B
    • /
    • 제10B권1호
    • /
    • pp.67-72
    • /
    • 2003
  • 이 논문은 문맥 종속 화자인식에 사용될 벡터 앙자기의 설계법 개선에 관한 연구이다. 구체적으로 벡터 양자기 코드북 생성 과정에서 기준 화자를 제외한 모든 비기준 화자에 대해 비반복적 학습 방법을 사용하여, 학습에 필요한 계산 복잡도를 획기적으로 줄이는 방법을 제안한다. 이 제안된 준비반복 벡터 양자기 설계법은, 종래의 설계법이 모든 화자의 코드북 생성에 반복적 학습 설계를 사용한다는 것과 대조를 이룬다. 준비반복 벡터 양자기 설계법의 특징은 다음과 같다. 첫째, 이 설계법은 단지 기준 화자에 대하여만 반복 학습을 수행하고 비기준 화자에 대하여는 반복 학습을 하지 않는다. 둘째, 설계된 비기준 화자의 양자 영역은 기준화자의 양자 영역을 원용하며, 양자점은 자신의 통계 분포에 대해 최적점으로 설정된다. 수치 실험은 화자 20명에 대하여 멜켑스트럼 12차 특징벡터를 사용하였고 코드북 크기를 2부터 32까지 변화시키면서 기존의 벡터 양자기 인식법과 비교하였다. 제안된 방법은 코드북 크기가 적절하고 학습 데이터 길이가 충분한 경우 인식률 100%로 기존의 방법과 같은 결과를 보였다. 따라서 제안된 준비반복 벡터 양자기 설계법은, 설계에 필요한 학습 횟수가 획기적으로 줄면서 인식률은 보존되어, 새로운 대안이 될 것으로 사료된다.

Biological Control of Crown Gall

  • Kerr, Allen;Biggs, John;Ophel, Kathy
    • 한국식물병리학회:학술대회논문집
    • /
    • 한국식물병리학회 1994년도 Proceedings of International Symposium on BIOLOGICAL CONTROL OF PLANT DISEASES Korean Society of Plant Pathology
    • /
    • pp.11-26
    • /
    • 1994
  • Crown gall of stonefruit and nut trees is one of the very few plant diseases subject to efficient biological control. The disease is caused by the soil-inhabiting bacteria Agrobacterium tumefaciens and Agrobacterium rhizogenes and the original control organism was a non-pathogenic isolate of A. rhizogenes strain K84. Control is achieved by dipping planting material in a cell suspension of strain K84 which specifically inhibits pathogenic strains containing a nopaline Ti plasmid. Because the agrocin 84-encoding plasmid (pAgK84) is conjugative, it can be transmitted from the control strain to pathogenic strains which, as a result, become immune to agrocin 84 and cannot be controlled. To prevent this happening, the transfer genes on pAgK84 were located and then largely eliminated by recombinant DNA technology. The resulting construct, strain K1026, is transfer deficient but controls crown gall just as effectively as does strain K84. Field data from Spain confirm that pAgK84 can transfer to pathogenic recipients from strain K84 but not from strain K1026. The latter has been registered in Australia as a pesticide and is the first genetically engineered organism in the world to be released fro commercial use. It is recommended as a replacement for strain K84 to prevent a breakdown in the effectiveness of biological control of crown gall. Several reports indicate that both strains K84 and K1026 sometimes control crown gall pathogens that are resistant to agrocin 84. A possible reason for this is that both strains produce a second antibiotic called 434 which inhibits growth of nearly all isolates of A. rhizogenes, both pathogens and non-pathogens. Crown gall of grapevine is caused by another species, Agrobacterium vitis. It is resistant to agrocin 84 and cannot be controlled by strains K84 or K1026. It is different from other crown gall pathogens in several characteristics, including the fact that, although a rhizosphere coloniser, its also lives systemically in the vascular tissue of grapevine. Pathogen free propagating material can be obtained from tissue culture or, less surely, by heat therapy of dormant cuttings. A number of laboratories are searching for a biocontrol strain that will prevent, or at least delay, reinfection. A non-pathogenic A. vitis strain F/25 from South Africa looks very promising in this regard.

  • PDF

첨가 재료에 따른 저장 중 죽의 품질 특성에 미치는 영향 (Effects of additives on physicochemical properties of gruels during storage)

  • 심예은;금준석;안용식;박종대;최현욱;서동호;이병호
    • 한국식품과학회지
    • /
    • 제52권2호
    • /
    • pp.162-166
    • /
    • 2020
  • 저장 중 죽류의 이화학적 품질 변화는 90일이 경과되면서 초기 값에 비해 색도는 잣죽의 L값이 감소하는 경향을 나타내었으며, 반면 a와 b는 증가하는 경향을 나타내었다. 북어죽, 콩죽과 닭죽의 L값은 큰 변화가 없었으며, a, b값은 증가하는 경향을 나타내었다. 버섯죽은 L, a, b값이 감소하는 경향을 나타내었다. 저장 기간 중 북어죽, 버섯죽, 닭죽, 콩죽의 ΔE값은 큰 변화가 없었으며, 잣죽의 경우 30일이 경과되면서부터 증가하는 경향을 나타내었다. 조직감의 변화는 gumminess, cohesiveness, adhesiveness, hardness가 감소하는 경향을 나타내었으며, 점도와 밀접한 관계가 있는 adhesiveness의 경우 북어죽, 닭죽, 잣죽, 콩죽, 버섯죽의 순으로 감소하는 경향을 나타내었다. 초기 아밀로오스 함량은 북어죽 28.73%, 닭죽 26.23%, 버섯죽 24.98%, 콩죽 22.87%, 잣죽 22.38%의 순으로 아밀로오스를 함유하고 있었으며, 저장 90일째에도 아밀로오스 함량에는 북어죽, 닭죽, 버섯죽, 콩죽, 잣죽의 순으로 나타났다. 전당의 함량은 잣죽, 콩죽, 버섯죽, 닭죽과 북어죽이 각각 36.48, 36.33, 36.24, 35.28, 34.82%로 나타났으며, 저장기간 90일 이후의 전당의 함량은 버섯죽, 콩죽, 잣죽, 닭죽, 북어죽의 순으로 나타났고, 북어죽을 제외한 죽의 전당의 범위는 31.62-33.54%로 나타났다. 또한 5가지 죽 모두 포화지방산은 증가한 반면 불포화지방산은 감소하였다. 이와 같이 죽류의 저장 중 이화학적 품질은 저장 30일까지 큰 변화 없이 완만히 감소하는 경향을 나타내었다. 이렇듯 HMR 식품으로서 가치가 있는 죽의 저장성을 증가시킴으로써 서양식 위주로 발전하고 있는 HMR 시장에 한식을 널리 보급하는데 도움이 될 것이다.

조선시대(朝鮮時代) 宮中(궁중) 제정(祭亭)의 제찬용(祭饌用) 병류(餠類)에 관(關)한 연구(硏究) (An Analytic Study on the Rice Cakes Needed for Aneestral Worship Rites in the Court of Choson Dynasty)

  • 정현숙;허필숙
    • 한국식생활문화학회지
    • /
    • 제3권2호
    • /
    • pp.125-133
    • /
    • 1988
  • In recent years, Korean traditional culture has been reviewed in many ways. And Great efforts have been made to form a culture suitable for the Koreans. With these tendencies, the interest in Korean traditional foods has been greater. So this paper is intended to identify and analyze the kinds, materials and cooking processes of the rice cakes needed for ancestral worship rites in the court of Choson Dynasty. The work is centered around the Tae-sang-ji written by Lee kun-myong in 1873-the 10th year since king kojong's coming to the throne. And we study such literatures on foods and cooking processes as Kyugon-si-ui-bang, Yo-rok, Jungbo-Sallim-Kyungjae, Kyuhap-Chongso, Si-ui-jon-so and so on. The results are compared and analyzed. Cooking processes and materials of Korean rice cakes in Choson Dynasty were various and had traditional characteristics. Rice cakes necessarily needed for various rites were called pyun especially when they were used for ancestral worship. And many different kinds of Pyun were used according to seasons. There were nineteen kinds of rice cakes used for ancestral worship in the court: Gu-i-Byung, Bun-ja-Byung, Baek-Byung and so on. The six; Gu-i-Byung, Bun-ja-Byung, Sam-sik-Byung, Yi-sik-Byung, Baek-Byung and Huk Byung were essential for the great rites at Jong-myo and Young-nyung-Jeon and so they were highly thought of. Main materials of these six were rice, glutinousrice, sorghum and wheat flour. Cooking processes of the rice cakes above mentioned can be classified into frying, beating, boiling, steaming, etc. Powder for covering rice cakes was made of bean, pine nut, sesame and red bean, of which bean was made the greatest use of. If was very wise of them to use these kinds of powder, for they supply protein and lipid of which rice cakes are destitute and they also add colors and good tastes to rice cakes. But Korean traditional rice cakes are less used as the thought of rites has changed and various kinds of desserts have been developed. And yet there is no denying the fact that even now rice cakes play a great role in traditional formalities.

  • PDF

1700년대~1960년대 문헌에 나타난 탕평채의 문헌고찰 (Literature Review of Tangpyeongchae in Cook Books Published in 1700~1960s)

  • 이경애;김보람;김향숙;신말식
    • 한국식품조리과학회지
    • /
    • 제28권4호
    • /
    • pp.489-497
    • /
    • 2012
  • 탕평채의 전통 조리법 발굴을 위해 1700년대부터 1960년대의 고문헌 및 고조리서에 수록된 탕평채의 재료, 양념, 조리방법의 변화 등을 검토하였다. 탕평채는 1700년대 말의 문헌인"경도잡지"와 "고사십이집"에 처음 소개된 후 "임원십육지", "동국세시기", "송남잡식", "진찬의궤", "진작의궤", "명물기략", "규곤요람", "시의전서", "조선요리제법", "조선무쌍신식요리제법", "주부의 동무, 조선요리제법", "조선요리학", "이조궁정요리통고", "우리나라 음식 만드는 법"등에 탕평채가 수록되었다. 조선시대 궁중 연회음식을 수록한 "진찬의궤"와 "진작의궤"에는 청포채란 명칭으로 탕평채가 소개되어 있다. 탕평채의 재료 중 묵, 고기, 미나리, 숙주나물, 달걀, 김의 사용이 보편화된 것은 1900년대 중반 이후이며, 달래, 물쑥과 같은 봄나물을 재료로 사용한 기록도 있다. 1700년대 말에는 단지 초장(간장과 초로 만듦)으로만 무쳐 먹었던 탕평채는 이후 간장, 초 뿐 아니라 고추, 후춧가루, 깨소금, 참기름, 마늘, 파, 소금, 설탕 등을 사용해서 양념하여 보다 다양한 맛을 내고자 하였다. 또한 미나리, 고춧가루, 실고추, 지단채, 통잣, 잣가루, 깨소금, 김 등을 고명으로 사용했다. 탕평채의 조리방법은 1800년대 말의 문헌부터 비교적 자세히 기술되어 있다. 1800년대 말에는 모든 재료를 함께 양념했으나, 1900년대에는 다른 재료를 먼저 양념하고 마지막에 묵을 넣고 무치는 방법도 사용했다.

안동지역의 제례에 따른 음식문화(I) -불천위제례(不遷位祭禮)와 제수(祭羞)- (Dietary Culture for Sacrificial Rituals and Foods in Andong Area (I) -Bul-Chun-Wi Sacrificial Rituals and Foods-)

  • 윤숙경
    • 한국식생활문화학회지
    • /
    • 제11권4호
    • /
    • pp.439-454
    • /
    • 1996
  • The present study investigated Bul-Chun-Wi Sacrificial Ritual (sacrificial service which has been handed down from generation to generation to worship the family ancestors in the period of $1400{\sim}1800$) and foods for the sacrificial service among fourteen head families in Andong area. The findings are as follows; 1. In Bul-Chun-Wi Sacrificial Rituals, family shrine has been maintained in good shape, and the table, dishes, and foods used in the rituals have not been changed so much until these days. 2. While vegetable soup is widely used as soup, one family uses the seaweed soup, the other soup mixed with meat, fish, and vegetable. Specially soybean-powdered soup, which is the distinguishable food in Andong area, has been used. 3. As a basic Ddock, mainly Si-Ru-Ddock(a steamed rice cake), piled up to 13-15 stacks, is used. Additional 7-9 kinds of Ddock are placed on top of the basic Ddock. 4. For grilled-meat food(Geuck), eight families use the raw meat, and one family uses the half-cooked meat. Recently, five families have used the cooked meat. Mostly used ones are meat-Geuck, fish-Geuck, chicken-Geuck, and the Geuck are not served one by one. Instead the Geuck are stacked in one dish designed for Geuck in order of meats from poultry, animal, fish, and shell. As the sub-dishes for rice, raw and cooked Geuck are used. 5. The number of stew (Tang) are 3 to 6 and 5 stews is the most popular. Commonly used stews are meat stew, fish stew, chicken stew, vegetable stew, blood stew, and organs stew. For the vegetable stew, buckwheat gel can be used. 6. As the fruit, chinese date, pear, nut and dried persimmons are the basic ones. The even number of 6 or 8 colorful fruits are used, while the odd number of 7 or 9 colorful fruits are used in three head families. 7. As Sik-Hae which is a drink and made from fermented rice, rice Sik-Hae or fish Sik-Hae has been necessarily used. 8. As raw meat dish, the liver of cow or meat is used. As a wrapping materials, the reticulum of a ruminant, green seaweed or thinly fried egg can be used.

  • PDF