• 한국식생활문화학회지
• /
• 제14권4호
• /
• pp.305-317
• /
• 1999

An attempt was made to provide valuable information to improve service quality and customer satisfaction for in-flight catering service. The customers' demographic characteristics that impact on service quality and customer satisfaction were examined for a group of customer. 474 customers who have been used the airplane within 1 year were participated in this study. Statistical analysis was performed using SAS software program (version 6.01) for descriptive analysis, factor analysis, t-test and ANOVA. The results of the study can be summarized as follows: 1. Service Quality in In-flight catering was assessed on the basis of 18 service quality attributes and 5 dimensions derived from a factor analysis. After comparing customers' perception to customers' expectation regarding in-flight service quality, the quality of dimensions for 'meals', and 'sanitation' were not showed any significant differences. However, the expectation for dimensions of 'diversity of menu', 'providing information', and 'the degree of concern to the customers' were rated significantly higher than the perception for those. 2. Among the demographic variables, age and gender had highly influences on the customers' expectation and perception regarding service quality and customer satisfaction. 3. The korean food that the customers wanted to have for in-flight meals was investigated. Among the kinds of gruel(jook), abalone gruel(jeonbok-jook), pumpkin gruel(hobak-jook), and pine-nut gruel(jat-jook) were chosen to have for in-flight korean meals. It was rated that the preferences for beef soup(sogogikook), hot spicy beef soup(youkgaejang), brown sea-weed soup(miyoukkook) were higher than others in soup group. The preferences for boiled rice with assorted mixture(bibimbab) showed the highest and beef and rice soup(seoleongtang), boiled rice with four the staple cereals(ogogbab) were preferred higher than the others in main dish group. Bulgogi was rated the most popular dish. Korean style punch with omiza(whachae), sweet rice dish(yaksik) and fried glutinous rice cake(gangjeong)showed high preferences in dissert.

• 한국식생활문화학회지
• /
• 제26권5호
• /
• pp.455-467
• /
• 2011

The main purpose of this study was to survey the various kinds of recipes for pheasant found in seventeen Korean cookbooks published from the 1800's to the 1990's. There were 95 pheasant recipes found in the literature which could be classified into three major groups: cooking with moist heat, cooking with dry heat, and other. The three major groups were then broken down into thirteen smaller groups. A detailed look at the frequency of terms in each recipe shows that Gui Sanjeok (grilled Korean shish kebabs) appears 24 times, Guk Tang and Jeongol (soup and stew) 23 times, Kimchi (fermented cabbage) 11 times, Po (jerky) 9 times, Jorim (boiled in soy sauce) 7 times, Jjim (steamed) 6 times, Bokeum (stir-fried) 5 times, Twigim (deep-fried) 3 times, Buchim (fried) 2 times, Jigae jijim (stewed) 2 times, and Jang (paste), Myeon (noodles), Gooum (boiled) and Yeot (Korean hard taffy) 1 time each. The main ingredient is always the pheasant. We investigated the use of the whole pheasant cooked, how to slice and tenderize pheasant meat, use the meat only, or use only certain parts. Depending on the characteristics of cooking recipes, pheasants with thin, soft bones and organs were investigated for cooking. Substituted materials were used for a few of the vegetables, meat, and seafood in the recipes, and seem to go well together. Garnishes used included pine nut powder and fried eggs. Seasoned salt, soy sauce, pepper, sesame, sesame oil, chopped onion, garlic, and ginger were also reported to have been used.

• Journal of Biosystems Engineering
• /
• 제36권5호
• /
• pp.377-383
• /
• 2011

This study proposed the new method of discerning the assembled parts and presuming the position of central point in a Cowl Cross Bar (CCB) using a Charge-Couple Device (CCD) camera attached to a robot in the auto assembly line. Three control points of an ellipse were decided by three reference points, which were equally distanced. The radii of these reference points were determined by the size of the object, and the repeated presumption secured the precise determination. The comparison of the central point of ellipse presumed by Randomized Hough Transform (RHT) with the part information stored in a database was used for determining the faulty part in an assembly. The method proposed in this study was applied for the real-time inspection of elliptical parts, such as bolt, nut hole and so on, connected to a CCB using a CCD camera. The findings of this study showed that the precise decision on whether the parts are inferior or not can be made irrespective of the lighting condition of industrial site and the noises of the surface of the part. In addition, the defect decision on the individual elliptic parts assembled in a CCB showed more than 98% accuracy within a 500-millisecond period at most.

• Nutrition Research and Practice
• /
• 제7권2호
• /
• pp.82-88
• /
• 2013

Eleven types of nuts and seeds were analyzed to determine their energy (326-733 mg), moisture (1.6-18.3 mg), carbohydrate (8.8-70.9 mg), protein (4.9-30.5 mg), lipid (2.5-69.8 mg), and ash (1.2-5.5 mg) contents per 100 g of sample. Energy content was highest in pine nuts (733 mg/100 g), carbohydrate level was highest in dried figs (70.9 mg/100 g) and protein was highest in peanuts (30.5 mg/100 g). The amino acid compositions of nuts and seeds were characterized by the dominance of hydrophobic (range = 1,348.6-10,284.6 mg), hydrophilic (range = 341.1-3,244.3 mg), acidic (range = 956.1-8,426.5 mg), and basic (range = 408.6-4,738.5 mg) amino acids. Monounsaturated fatty acids (MUFA) were highest in macadamia nuts (81.3%), whereas polyunsaturated fatty acids (PUFA) were highest in the walnuts (76.7%). Macadamia nuts did not contain any vitamin E, whereas sunflower seeds contained the highest level (60.3 mg/kg). Iron (Fe) content was highest in pumpkin seeds ($95.85{\pm}33.01$ ppm), zinc (Zn) content was highest in pistachios ($67.24{\pm}30.25$ ppm), copper (Cu) content was greatest in walnuts ($25.45{\pm}21.51$ ppm), and lead (Pb) content was greatest in wheat nuts ($25.49{\pm}4.64$ ppm), significantly (P < 0.05). In conclusion, current commercial nuts and seeds have no safety concerns, although further analysis of Pb contents is necessary to ensure safety.

• 한국산학기술학회논문지
• /
• 제15권12호
• /
• pp.6967-6972
• /
• 2014

기계적 체결 방식으로 볼트와 너트를 이용한 결합 방식과 리벳이나 핀이 널리 사용되고 있다. 압입 방식은 다른 생산방법에 비하여 쉽게 가공 가능하며 재료의 인성이 우수하다. 하지만 실제적으로 압입방식으로 생산하는 과정에서 균열이 발생될 수 있는 경우가 많다. 따라서 본 연구에서는 CATIA 프로그램을 이용하여 핀이 PCB 판으로 들어가고 나가는 두 가지 경우의 모델을 만들고 ANSYS 프로그램을 이용하여 유한요소 해석을 수행하였다. Case 1 및 2의 경우에 핀이 PCB판에 들어갈 때, PCB판에서 작용되는 최대 하중은 각각 79.708N과 90.277N이다. 그리고 Case 1 및 2의 경우에, PCB판이 Pin에서 빠져나올 때의 최대 하중은 각각 63.783N과 33. 75N으로 각각 나타났다. 본 연구의 결과를 실제 압입 공정의 설계에 응용한다면 그 파손방지 및 내구성을 평가하는 데에 활용이 클 것으로 사료된다.

• Smart Structures and Systems
• /
• 제16권2호
• /
• pp.281-294
• /
• 2015

Bolted joint connection is the most commonly used connection element in structures and devices. The loosening due to external dynamic loads cannot be observed and measured easily and may cause catastrophic loss especially in an extreme requirement and/or environment. In this paper, an innovative Real-time Cross-Correlation Method (RCCM) for monitoring of the bolted joint loosening was proposed. We apply time reversal process on stress wave propagation to obtain correlation signal. The correlation signal's peak amplitude represents the cross-correlation between the loosening state and the baseline working state; therefore, it can detect the state of loosening. Since the bolt states are uncorrelated with noise, the peak amplitude will not be affected by noise and disturbance while it increases SNR level and increases the measured signals' reliability. The correlation process is carried out online through physical wave propagation without any other post offline complicated analyses and calculations. We implemented the proposed RCCM on a single bolt/nut joint experimental device to quantitatively detect the loosening states successfully. After that we implemented the proposed method on a real large structure (reaction wall) with multiple bolted joint connections. Loosening indexes were built for both experiments to indicate the loosening states. Finally, we demonstrated the proposed method's great anti-noise and/or disturbance ability. In the instrumentation, we simply mounted Lead Zirconium Titanate (PZT) patches on the device/structure surface without any modifications of the bolted connection. The low-cost PZTs used as actuators and sensors for active sensing are easily extended to a sensing network for large scale bolted joint network monitoring.

• Asian-Australasian Journal of Animal Sciences
• /
• 제12권8호
• /
• pp.1246-1250
• /
• 1999

Rabbits (48) of Soviet chinchilla (24) and White giant (24) were fed from 6 weeks to 12 weeks of age intensively on either of four isonitrogenous - isocaloric diets containing 0 ($D_1$), 5($D_2$), 10($D_3$) and 20($D_4$) percent raw neem seed kernel cake (NSKC), respectively as per NRC (1977) requirements in a Randomized block design and slaughtered at the end to find out differences in their carcass traits due to NSKC feeding. Dietary treatment had no significant effect on weight of edibles and inedibles and their percentages and dressing percentage in terms of carcass, carcass with pluck and carcass with pluck and head. Similarly, the meat-bone ratio of various primal cuts and overall carcass, yield of edibles per unit of inedibles and eye muscle area were not influenced due to the dietary variations. Chemical composition of fresh meat, and organoleptic evaluation of cooked meat with and without salt did not vary significantly due to incorporation of NSKC in the diets. The rabbits fed 20% NSKC ($D_4$) though consumed more (p<0.05) DM and DE per kg meat production, the intake of crude protein and total digestible nutrients was similar with other dietary treatments. Feed cost per unit meat production was, however, lower on 5 and 10% NSKC containing diets by 7.75 and 12.56%, respectively, as compared to deoiled ground nut cake containing control diet. It appears that NSKC could be used as a wholesome vegetable protein supplement upto 10% in diet of rabbits without any adverse effect on commercial carcass traits.

• Asian Pacific Journal of Cancer Prevention
• /
• 제14권12호
• /
• pp.7277-7281
• /
• 2013

Background: Globally, there have been important changes in trends amongst gender, histology and smoking patterns of lung cancer cases. Materials and Methods: This retrospective study was conducted on 466 patients with lung cancer who were registered in Regional Cancer Center, Regional Institute of Medical Sciences, Manipur from January 2008 to December 2012. Results: Most were more than 60 years of age (67.8%) with a male: female ratio of 1.09:1. Some 78.8% of patients were chronic smokers with male smoker to female smoker ratio of 1.43:1. Consumption of alcohol was found in 29.4%, both smoking and alcohol in 27.5%, betel nut chewing in 37.9% and tobacco chewing in 25.3%. A history of tuberculosis was present in 16.3% of patients. The most frequent symptom was coughing (36.6%) and most common radiological presentation was a mass lesion (70%). Most of the patients had primary lung cancer in the right lung (60.3%). The most common histological subtype was squamous cell carcinoma (49.1%), also in the 40-60 year age group (45.9%), more than 60 year age group (51.6%), males (58.1%) and females (41.8%). As many as 91.9% of squamous cell carcinoma patients had a history of smoking. About 32.5% of patients had distant metastasis at presentation with brain (23.8%) and positive malignant cells in pleural effusions (23.1%) as common sites. The majority of patients were in stage III (34.4%), stage IV (32.5%) and stage II (30.2%). Conclusions: Our analysis suggests that the gender gap has been narrowed such that about half of the patients diagnosed with lung cancer are women in this part of India. This alarming rise in female incidence is mainly attributed to an increased smoking pattern. Squamous cell carcinoma still remains the commonest histological subtype. Most of the patients were elderly aged and presented at locally or distantly advanced stages.

• Nutrition Research and Practice
• /
• 제6권1호
• /
• pp.61-67
• /
• 2012

The Korean diet, including breakfast, is becoming more Western, which could increase the risk of metabolic syndrome. Our aim was to assess whether breakfast patterns are associated with risk for metabolic syndrome in Korean adults. The study subjects (n=371; 103 men, 268 women) were employees of Jaesang Hospital in Korea and their acquaintances, and all subjects were between 30 and 50 years old. The data collected from each subject included anthropometric measurements, three-day food intake, blood pressure (BP) and blood analyses. The three breakfast patterns identified by factor analysis were "Rice, Kimchi and Vegetables", "Potatoes, Fruits and Nuts" and "Eggs, Breads and Processed meat". The "Rice, Kimchi and Vegetables" pattern scores were positively correlated with systolic (SBP) and diastolic blood pressure (DBP) measurements in men (P<0.05) and with serum triglyceride (TG) levels in women (P<0.05). The "Eggs, Breads and Processed meat" pattern scores correlated positively with weight, body mass index (P<0.05) and serum TGs (P<0.01) in men. The "Potatoes, Fruits and Nuts" pattern was associated with lower risk of elevated BP (OR 0.49, 95% CI 0.28-0.88) and fasting glucose levels (OR 0.51, 95% CI 0.26-1.00). In contrast, the "Eggs, Breads and Processed meat" pattern was associated with increased risk of elevated TGs (OR 2.06, 95% CI 1.06-3.98). Our results indicate that reducing the consumption of eggs, western grains and processed meat while increasing fruit, nut and vegetable intake for breakfast could have beneficial effects on decreasing metabolic syndrome risk in Korean adults.

• 한국산학기술학회논문지
• /
• 제18권3호
• /
• pp.666-672
• /
• 2017

본 연구팀은 프레스 성형 공정에서 버텀 섀시 (bottom chassis)에 팸너트 (pem nut)를 고정하는 것과 같은 협소 공간 작업을 위한 6축 다관절 로봇을 개발하고 있다. 본 논문에서는 6축 다관절 로봇의 위치 제어를 위한 기구학 해석과 가반하중에 따른 위치 정밀도 파악을 위한 구조해석을 수행하였다. 먼저, 로봇의 Denavit-Hatenberg 파라미터를 정의하고, 정기구학과 역기구학 모델을 제시하였다. 기구학 모델은 Coppelia Robotics 사의 virtual robot experimentation platform (V-REP)을 이용하여 시각적인 시뮬레이션을 통해 검증하였다. 위치 정밀도 분석은 완전 펼침 상태와 완전 접힘 상태에서 자중에 의한 처짐량과 가반하중에 의한 처짐량에 대한 구조해석을 통해 수행하였다. 해석 결과, 최대 변형량은 완전 펼침 상태에서 자체 하중만 있는 경우 0.339 mm로 나타났으며, 5kgf의 하중이 장착된 경우에는 0.667 mm로 나타났고, 설계 조건 1 mm 내에 있음을 확인하였다. 또한, 최대 발생 응력은 축 2와 3을 연결하는 링크에서 22.05 MPa로 나타났고, 부품 재질을 고려할 때 이 값은 구조적으로 안전함을 확인하였다.