• 제목/요약/키워드: nut

검색결과 539건 처리시간 0.026초

폐에 발생한 고환 핵단백질 정중선 암의 영상의학적 소견: 증례 보고 (Radiologic Manifestations of Pulmonary Nuclear Protein in Testis Midline Carcinoma: A Case Report)

  • 김정아;강미진;김정연;김지영;김성희;정명자;이지혜
    • 대한영상의학회지
    • /
    • 제84권2호
    • /
    • pp.498-503
    • /
    • 2023
  • 고환 핵단백질 정중선 암은 매우 드물고 분화가 나쁜, 악성 편평세포암의 한 하위 종양으로서 공격적으로 분화하여 예후가 좋지 않다. 특히 폐에서 발생하는 고환 핵단백질 정중선 암은 현재까지 국내에 보고된 증례가 많지 않고 다양한 조직학적 형태를 보일 수 있어 다른 암과 혼동될 수 있다. 영상의학적 소견의 보고는 전 세계적으로 매우 드문 편이다. 저자들은 25세 여성에서 발생한 폐 고환 핵단백질 정중선 암의 영상의학적 소견을 병리학적인 소견과 함께 보고하고자 한다.

자동차 조립라인에서 이중-헴머형(Double-hammer type) 임펙트 렌치와 오일-펄스형(Oil-pulse type)임펙트 렌치 에어공구의 국소진동가속도 및 소음수준 (Hand-Arm Vibration and Noise Levels of Double-Hammer Type and Oil-Pulse Type Impact Wrenches in Automobile Assembly Lines)

  • 정재열;김정만
    • 한국산업보건학회지
    • /
    • 제5권2호
    • /
    • pp.147-159
    • /
    • 1995
  • This study was conducted to introduce fundamental data of hand-arm vibration and noise exposure levels with impact wrenches(double-hammer impact wrenches and oil-pulse impact wrenches) used in automobile assembly lines considering the process variables and tool variables. In studing, products per day, required time screwing the bolts or nuts per bolts or nut were considered as process variables, and capacity of bolts or nuts, air consumptions per minute, tool weights, RPM were considered as tool variables. Hand-arm vibration levels of 3 axis in each hand were measured using the instruments compling with ISO/DIS 5349 and noise levels were measured using a noise logging dosimeter. The results were as follows : 1. Required time to screwing the bolt or nut by oil-pulse impact wrenches is shorter than double-hammer impact wrenches but total daily exposure time of oil-pulse impact wrenches was higher than double-hammer impact wrenches because the number of bolts or nuts per cycle was many. 2. Oil-pulse impact wrenches have been used to screwing the large bolt or nut in comparing with double-hammer impact wrenches and required time to screwing the bolts or nuts were shorter than double-hammer impact wrenches because oil-pulse impact wrenches were using high RPM and large air consumption per minute. Noise level of oil-pulse impact wrenches was 8 dB(A) lower than double-hammer impact wrenches. 3. Dominant hand-arm vibration levels of double-hammer impact wrenches in each hand were $8.24m/sec^2$ of Zh axis in right hand and $9.60m/sec^2$ of Xh axis in left hand. Dominant hand-arm vibration level of oil-pulse impact wrenches in each hand was $2.59m/sec^2$ of Xh axis in right hand and $3.23m/sec^2$ of Yh axis in left hand. 4. In double-hammer impact wrenches, corresponding hand-arm vibration levels of Xh, Yh, Zh axis in left hand were higher than hand-arm vibration levels of right hand in 3 axis. In oil-pulse impact wrenches, Xh axis of right, Yh axis of left, Zh axis of left were higher than the corresponding hand-arm vibration levels of Xh, Yh, Zh axis in right and left hand. 5. Correlation coefficients among Xh, Yh. Zh axis of right and left hand hand-arm vibration levels in double-hammer impact wrenches and oil-pulse impact wrenches were commonly high in Yh axis and correlation coefficients of Yh axis in double-hammer impact wrenches and oil-pulse impact wrenches were 0.76 and 0.86,respectively. 6. As a measure repetitiveness, plotting total daily exposure time with the number of bolts or nut per cycle, direct correlation was shown between repetitiveness and hand-arn vibration exposure, and correlation coefficient between the number of bolts or nut per cycle and total daily exposure time in double-hammer impact wrenches, oil-pulse impact wrenches were 0.84 and 0.50, respectively. 7. Considering the total acceleration level and tool variables in double-hammer impact wrenches and oil-pulse impact wrenches, air consumption in right hand, and bolt or nut capacity in left hand were commonly the variable that explainability was high. Considering the noise and tool variables in double-hammer impact wrenches and oil-pulse impact wrenches, air consumption per minute was commonly the variable that explainability was high.

  • PDF

근대 이후 죽의 조리과정 변화 연구 -팥죽, 잣죽, 타락죽을 중심으로- (A Study on Changes in the Cooking Process of Gruel in Cook Books Written during Last 100 Years)

  • 조미숙;이경란
    • 한국식품영양학회지
    • /
    • 제24권4호
    • /
    • pp.589-601
    • /
    • 2011
  • The purpose of this study was to investigate changes in the cooking process of $Pat-juk$(red beans porridge), $Jat-juk$(pine-nut porridge) and $Tarak-juk$(milk porridge) in cooking books published after Korean modern era, approximately from late 19th century to the present. We analyzed 11 historical cook books were analyzed. It is found that the amount of red beans used for $Pat-juk$ was the same or more than that of rice but never less than rice. Only one cook book suggested sugar as seasoning for final taste, but all the other cook books mentioned salt for final taste. $Hangukeumat$(1987) suggested the method for obtaining optimum color for $Pat-juk$. After smashing and passing through the cooked red beans, collecting the red bean water to boil first and then adding the passed through red beans to boil together, in which rice will be added the last to be boiled. For $Jat-juk$, the ratio of the amount of pine-nut and rice were varied among cook books that the amount of pine-nut can be more, same or less than rice. $Jat-juk$ can have salty or sweet, so sugar, honey or salt were used for final seasoning. Pine-nut and rice were cooked together or cooked successively depending on cook books. The changes in cooking procedures of $Tarak-juk$ were the portion of milk used and the method of preparing rice before making the porridge. Firstly, the portion of milk increased over time. $Tarak-juk$ can be also tasting both sweet or salty, so sugar or salt was used for final seasoning. Secondly, two method of preparing rice were found; one is that rice was ground after soaking in water and the other is that rice was ground and toasted before putting into the porridge. When the ground rice was toasted, the milk was added with water at the same time because the cooking time of the porridge with toasted rice was shortened so that the milk could be added earlier than the other method without the risk of sticking on the bottom of the pot. In further studies, the cooking procedures used in the previous period of the late 19th century should be examined. Also after restoring all the cooking methods suggested in cook books, the comparison of the sensorial and nutritional value needs to be carried out for applying or reinventing new recipe for food industry.

오배자 추출물 유래 친환경제제의 세균성과실썩음병균에 대한 항세균활성 (The Anti-bacterial Activity of Eco-friendly Farming Material based on Chinese Nut-gall Extraction on Acidovorax citrulli)

  • 서태진;양수정;이봉춘;김강민;이귀재;주호종
    • 한국유기농업학회지
    • /
    • 제24권3호
    • /
    • pp.571-582
    • /
    • 2016
  • 세균성과실썩음병(BFB)은 Acidovorax citrulli가 원인균으로서 전 세계적으로 박과채소에 큰 손실을 야기하며 고온다습한 조건에서 급속도로 진전되는 종자 병이다. 요즘 친환경재배가 인기를 얻어가고 있으나 BFB를 효율적으로 방제할 수 있는 적당한 방제제가 없는 실정에서 오배자 추출물 기반 약제의 A. citrulli에 대한 황세균활성을 시험하였다. 먼저 식물마다 다른 다양한 BFB 증상이 나타났다. 오배자 추출물 기반 약제의 액상 형태의 방제제는 높은 항세균활성을 보였으며, 온실내 포트실험 또한 오배자 추출물 기반 약제의 BFB 방제에 대한 잠재적 효과성을 보였다. 오배자 추출물 기반 약제 처리는 수박 유묘의 생존율과 오이의 유묘 길이에서 긍정적인 효과를 보였다. 따라서 이 연구에서 사용한 오배자 추출물 기반 약제에 대하여 추가적인 연구가 이루어진다면 박과채소인 BFB를 효과적으로 방제할 수 있는 가능성이 아주 높은 물질로 생각이 된다.

미생물 생변환을 통한 필리핀 너트유로부터 기능성 지방산 7,10-dihydroxy-8(E)-octadecenoic acid 생산 (Microbial bioconversion of natural Philippine nut oils into a value-added hydroxy fatty acid, 7,10-dihydroxy-8(E)-octadecenoic acid)

  • 차크라다 다사그란디;조엘 엘라마;김영순;김인환;김학렬
    • 한국식품과학회지
    • /
    • 제49권1호
    • /
    • pp.28-34
    • /
    • 2017
  • 본 연구를 통하여 P. aeruginosa PR3를 이용하여 DOD를 생산하기 위해 저가의 기질로서 필리핀 너트유가 효과적으로 사용될 수 있음을 확인하였으며 배지에 첨가되는 여러 영양인자들의 영향을 조사하여 DOD 생산성을 크게 향상시킬 가능성이 있음도 확인하였다. 따라서 DOD 생산에 이용되는 올레산을 식물성오일로부터 별도의 생산과정을 거쳐 생산하지 않고 식물성오일자체를 직접 기질로 사용함으로서 PR3 균주를 이용하여 고부가가치의 DOD를 효율적으로 생산할 수 있다는 것을 확인하였다.

조타장치 사고 재결서 분석과 NAS 3350 시험을 통한 카페리 여객선 타두재와 틸러 체결 너트 풀림 개선에 관한 연구 (A Study on the Improvement of Passenger Ship Rudder Stock and Tiller Locking Nut Loosening by Analyzing an Investigation Report and the NAS 3350 Test)

  • 강대곤;김신효;박재학
    • 해양환경안전학회지
    • /
    • 제24권2호
    • /
    • pp.253-259
    • /
    • 2018
  • 2014년 2월 여객선의 타두재 상단 너트가 풀려 타가 작동하지 않은 사고가 발생하였다. 많은 여객과 화물의 이동을 목적으로 하는 여객선의 조타 장치 사고로 인한 인명사고는 통계에 의하면 2010~2016년 0명이지만 조타장치의 고장으로 선박의 요건인 이동성을 갖추지 못한다면 물살이 거센 해역이나 출입항 선박이 많은 협수로에서는 선박의 조종에 대한 제약으로 인명사고의 비율이 높은 전복 사고나 충돌 사고로 발전할 수 있다. "선박안전법" 및 관련 고시인 "강선의구조기준"에는 타판과 타심재의 체결에 관련된 내용은 기준화 되어있으나 타 빠짐의 원인이 되는 상부 타두재와 너트의 체결에 대해서는 별도의 법령이 없다. 사고 이후 한국선급은 강선규칙 5편 제7장에 결합방법에 대해 개정을 하였다. 목포항과 주변 섬을 운항하는 여객선 12척에 대한 현장조사 결과 대부분 C형타 2개가 설치된 구조였으며, 체결방법으로는 9척이 용접에 의한 체결 방법을 적용하고 있었고 선박 자체적으로 예방 점검을 위해 체결 개소에 접근하기 어려운 구조로 되어 있었다. 1년에 한 번씩 타를 들어 올리거나 빼내야 하는 여객선의 특성을 고려하여 동종 사고를 방지할 수 있는 방안에 대해서 NAS 3350 시험을 통해 검토하였다.

밤 재배품종의 수확 후 과실품질 및 저온저장 중 밤 과실의 당도 및 경도 변화 (Postharvest Nut Quality, and Changes of Soluble Solids Content and Kernel Hardness During Cold Storage in Korean Prevailing Chestnut Cultivars)

  • 김만조;이욱;김선창;황명수;권용희;이문호
    • 한국산림과학회지
    • /
    • 제95권6호
    • /
    • pp.672-679
    • /
    • 2006
  • 밤의 이용가치를 높이기 위하여 밤 과실의 등급화 및 규격화에 필요한 정확한 품질평가 기준을 확립하고자 대보 등 13개 주요 재배품종을 대상으로 수확직후의 과실품질 및 저온저장 기간에 따른 밤 과실의 당도와 과육정도의 변화를 조사하였다. 2001년부터 2005년까지 수확 직후의 밤 과실을 대상으로 밤의 품질을 크게 좌우하는 입중, 당도, 과육경도, 열과율, 다배율을 조사한 결과, 각 형질에 있어서 품종간에 큰 차이가 있었으며 동일한 품종에서도 해마다 상당한 변이가 관찰되어 유전적인 요인 외에도 환경적인 영향을 많이 받는 것으로 나타났다. $2^{\circ}C$에서 16주간 저장하면서 4주 간격으로 당도변화를 조사한 결과 저장기간에 따라 상당한 차이가 나타났으며, 출운 품종의 경우 당도가 저장 16주째에 수확직후보다 8%나 증가되었다. 조생종을 제외한 대부분의 품종에 있어 저온저장 12주까지는 당도가 증가하였으나 그 이후에는 점차 감소하였다. 저온저장 중 과육정도는 석추품종을 제외하고는 기간이 경과함에 따라 약간 증가하였으나 유의성은 인정되지 않았다. 이상의 연구결과로부터 얻어진 주요 재배품종에 대한 과실품질 자료는 밤 재배지는 물론 육종가 등에게 유용한 정보가 될 수 있으리라 생각된다.

우리나라 중부지역 주요 밤 재배품종의 지역 및 수령에 따른 과실품질 (Effects of Region and Age on Nut Quality of Major Chestnut Cultivars (Castanea spp.) cultivated in the Central Region of Korea)

  • 김만조;이욱;박윤미;황석인
    • 한국산림과학회지
    • /
    • 제100권4호
    • /
    • pp.616-622
    • /
    • 2011
  • 본 연구는 수확 후 밤 품질관리 및 가공을 위한 특성자료를 확보하기 위하여 우리나라 중부지역에서 재배되고 있는 밤나무 주요 품종을 대상으로 지역 및 수령에 따른 품질을 비교 분석하였다. 지역 및 품종별 과실 입중을 조사한 결과, 지역별로는 부여가 가장 크고, 품종별로는 '병고57호'가 타 품종보다 큰 것으로 나타났다. 지역 및 품종별로 과실당도와 과육경도를 조사한 결과, 품종 및 지역 간 통계적으로 유의한 차이가 나타났다. 당도의 경우, 지역별로는 공주가 높고, 품종별로는 '축파'가 20.5%로 타 품종보다 가장 높은 것으로 나타났다. 과육경도에 있어서는 지역별로는 청양이 가장 높은 값을 보였으며, 품종별로는 단택이 통계적으로 유의하게 가장 낮은 값을 보였다. '단택', '옥광', '축파' 세 품종을 대상으로 수령에 따른 입중, 당도, 경도를 조사한 결과, 세 품종 모두 입중을 제외한 당도 및 경도에서 통계적으로 유의성은 인정되었으나 수령과의 상관성은 나타나지 않았다.

경기도 내 유통 견과종실류의 잔류농약 실태 모니터링 (Monitoring Pesticide Residues in Nuts and Seeds in Gyeonggi-do)

  • 이유나;문수경;이정희;김애란 ;문경은;강충원;이진희;박명기
    • 한국식품위생안전성학회지
    • /
    • 제38권3호
    • /
    • pp.152-157
    • /
    • 2023
  • 본 연구에서는 경기도 내 유통 중인 견과 종실류의 잔류농약 실태를 조사하고자 온라인 또는 유통매장을 통해 131건을 수거하여 조사하였다. 총 14품목의 견과종실류를 수거하였으며 339종의 잔류농약을 분석한 결과 131건 중 총 8건에서 검출되었으며 범위는 0.01 mg/kg-0.07 mg/kg 수준으로 나타났다. 검출된 시료 8건 중 7건이 잔류농약 기준을 초과하여 부적합으로 판정되었으며 부적합 7건 중 6건은 수입농산물에서 판정되었다. 중국산 호박씨의 경우 PLS가 적용된 피라클로스트로빈이 5건 검출되었으며 범위는 0.02 mg/kg-0.04 mg/kg 수준으로 나타났다. 인도산 참깨와 국내산 참깨에서도 펜디메탈린, 보스칼리드, 비펜트린이 각각 0.04 mg/kg, 0.05 mg/kg, 0.06 mg/kg으로 검출되어 부적합 수치를 보였다. 또한 검출된 8종의 농약에서 EDI/ADI (%) 값이 0.002%-0.372%으로 낮은 수준임을 확인하였다.

업체탐방 - 썬피드, 캐쉬 골드펠렛으로 농가 경쟁력 확보!

  • 한국낙농육우협회
    • 월간낙농육우
    • /
    • 제34권9호
    • /
    • pp.106-109
    • /
    • 2014
  • 최근 낙농가에서 바이패스 단백질의 이용성을 10%이상 증가시켜 주어 피트펄프, 면실 대체용으로 인기를 끌고 있는 사료 제품이 등장해 화제를 모으고 있다. 이 제품은 썬피드(경기 김포 통진읍 소재)의 주력 생산품인 캐쉬골드펠렛으로 캐슈 나무 열매의 내피를 가공해 만들어졌다. 술안주인 캐슈넛(Cashew Nut)으로 알려진 캐슈 열매의 내피가 어떻게 훌륭한 단미사료로 변신하는지 썬피드 이성종 대표와 이야기를 나눠봤다.

  • PDF