• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.195-199
• /
• 2004

Recently, optical disc drives are required to have high density and capacity in according with development of high definition images and rapid increase of various informations. Consequently, the numerical aperture becomes larger, the wavelength of laser is coming to be short. However, it deteriorates rolling mode effect on an optical pickup actuator. Therefore, this paper proposes new design and optimization of tracking coils for reducing it. First, we verify that discord between the center of force and the center of mass by restrictions of design condition is an important factor of rolling mode effect. Then, in order to reduce it, we propose new design parameters of tracking coils. Finally, we reduce rolling mode effect through optimization of tracking coils using Taguchi method and response surface method.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.378-380
• /
• 2002

There has been lower the tilt margin by the increase of coma aberration due to the reduction of wave-length and the increase of numerical aperture for high density recording. The RF signal degradation is increased as the decrease of tilt margin. To compensate the tilt margin, the optical pick-up actuator for high-speed CD/DVD re-writable system should be able to drive the radial-tilt motion. We announce that the 3-axis drive actuator for high-speed CD/DVD rewritable system. And what was more, the DC/AC sensitivities of this actuator are suitable fur the low-speed playability, the high-speed readability and the high-speed rewritability.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.226-233
• /
• 2003

There are many researches going on to develop the information storage devices using Blue-ray disc and DVD as a demand for high-density information storage devices is highly increasing. This high-density information storage device requires a short-wave laser and objective lens of high numerical aperture set in fer its operation. And, that brings out rapid decrease of tilt tolerance. Therefore, it is necessary that an actuator should control tilt motions to get a stable signal. In this paper, a new mathematical form of 3-D.O.F coupled model is formulated and magnetic circuit in constraints is most effectively designed with the use of the moving coil type actuator in higher sensitivity. Further, this paper presents a tilt coil whose rotational center point is put on that of the lens through the variation of tilt coil and proposes a 3-axis actuator with high sensitivity improved in its dynamic property through its structure analysis.

• Journal of KSNVE
• /
• v.5 no.1
• /
• pp.37-48
• /
• 1995

The prediction of sound pressure using acoustic holography has been recognized as a useful tool for the visualization of sound field. Cylindrical acoustic holography amongst acoustic holographic methods planar, spherical, and cylindrical ones-has a wide range of application since its rather simple construction and easy implementation for the sources. To utilize the propery of cylindrical holographic method, estimation errors associated with holographic parameters such as aperture size and sampling space must be envisaged. In this these errors have been studied by numerical simulation and the relation between the errors and the spectrum in wavenumber domain is described. The results are also confirmed by simple experiments.

• 정보저장시스템학회:학술대회논문집
• /
• 2005.10a
• /
• pp.42-43
• /
• 2005

Higher density in the holographic storage can be obtained by using shorter wavelength laser and higher numerical aperture (NA). In this paper, we adopted a blue laser diode with a wavelength of 405nm and high NA object lens. And the phase conjugation method is applied to prevent image distortion due to high NA. The performance of the system has been shown experimentally.

• Transactions of the Society of Information Storage Systems
• /
• v.2 no.4
• /
• pp.219-223
• /
• 2006

Near field recording(NFR) technology has been considered as a strong candidate to surpass the far-field diffraction limit imposed by the nature of light in present optical disk drives such as CD, DVD, and BD(Blu-ray Disk). In this paper, we suggest novel inside near-field dual layer recording concept using elliptic shape solid immersion lens(ESIL).

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.2
• /
• pp.257-266
• /
• 1999

In this paper, a spline-type divided-difference interpolation technique is proposed to efficiently evaluate the impedance matrix elements in the MoM analysis of layered medium problems. This method is combined with the fast computational method of the basis-expanded and tested dyadic Green's functions (expressed in the spectral domain integrals) in a recent literature. For the sake of its validity, the proposed method is applied to analyze the characteristics of a microstrip gap discontinuity, a microstrip filter, and an aperture coupled patch antenna. Numerical results obtained by this approach are in good agreement with those of other approaches.

• Proceedings of the KIEE Conference
• /
• 2000.11c
• /
• pp.594-596
• /
• 2000

The best simulation condition for the fiber collimator that uses ball lenses was investigated. This kind of fiber collimator can be used in a Micro-Optical-Cross-Connects(MOXC). MOXC is composed of collimating ball lenses, micro mirrors and single-mode fibers. In order to design a MOXC, it is very important to calculate beam path, beam radius, divergence angle that determines the insertion loss of the MOXC. Since the beam profile from the fiber facet is not exact Gaussian profile, it was found that the simulation condition in which beam waist exists on the fiber facet, ignoring Numerical Aperture(NA), gives best agreement with the experimental results. Beam radii were measured with conventional knife edge method.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.258-259
• /
• 2003

보호층 0.1mm두께의 20GB이상의 광디스크를 기록·재생하는 High Density Optical System에서는 Blue-violet laser와 NA(Numerical Aperture)0.85의 High NA의 대물렌즈를 사용한 Optical Pick Up이 필요로 된다. 종래의 대물렌즈는 glass 또는 plastic제의 2매 조합 대물렌즈가 많이 사용되어지고 있는데, 이는 두 렌즈간의 거리를 일정하게 유지시키기 위한 홀더 조립시의 공차가 엄격히 요구되며, 2매 조합 대물렌즈를 구동시키기 위한 actuator의 부피와 무게를 증가시킴으로서 구동감도를 감소시키는 단점이 있다. (중략)

• 한국태양에너지학회:학술대회논문집
• /
• 2011.04a
• /
• pp.144-149
• /
• 2011

This study aims to evaluate performance of ventilation and thermal about breathing wall by flowing air to indoor on appropriate conditions that is effective aperture area in the Central region(20, 50, $80cm^2/m^2$). The result is as follows : 1) Sectional temperature distribution of inflow and outflow out under the constant ventilation was reviewed. In the case of inflow, outside temperature increase effect was confirmed. 2) The more differences of temperature between outdoor and indraft of air was high, the more heat recovery was high.