• 한국컴퓨터정보학회논문지
• /
• 제20권11호
• /
• pp.25-30
• /
• 2015

The enormous increase of data with the development of the information technology make internet users to be hard to find suitable information tailored to their needs. In the face of changing environment, the information filtering method, which provide sorted-out information to users, is becoming important. The data on the internet exists as various type. However, similarity calculation algorithm frequently used in existing collaborative filtering method is tend to be suitable to the numeric data. In addition, in the case of the categorical data, it shows the extreme similarity like Boolean Algebra. In this paper, We get the similarity in SNS user's information which consist of the mixed data using the Gower's similarity coefficient. And we suggest a method that is softer than radical expression such as 0 or 1 in categorical data. The clustering method using this algorithm can be utilized in SNS or various recommendation system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 B
• /
• pp.817-820
• /
• 2002

Since a squirrel cage induction motor by NEMA Design types is designed to withstand full-voltage starting, direct starting method can be the most economical one. Starting a squirrel cage motor from standstill by connecting it directly across the line may allow inush currents of approximately 500-600% of rated current at lagging power factor of 35-50%. For many of the large motors, the starting inrush current may be great enough to cause voltage dips, which may adversely affect the building's lighting system. Electric utilities also have restrictions on starting currents, so that voltage fluctuations can be held to prescribed limits. Therefore the need for choosing the most appropriate method of motor starting is quite essential. In this paper, we proposed a plan for the selection of the most appropriate motor starting method, first by way of numeric simulation using manufacturer's data and second by way of actual experience. So far, more often than not, the selection of motor starting method has been accomplished only as regards to the capacity of the motor and the frequency of starting and stopping. But nowadays such high-tech apparatus as soft starters are being developed, and we are on the position to give more attention to clarify the way of selection of the motor starting method.

• 대한간호학회지
• /
• 제36권4호
• /
• pp.630-636
• /
• 2006

Purpose. To determine the effects of music therapy on pain, discomfort, and depression for patients with leg fractures. Methods. Data were collected from 40 patients admitted in an orthopedic surgery care unit. The subjects included 20 intervention group members and 20 control group members. Music therapy was offered to intervention group members once a day for 3 days for 30-60 minutes per day. Pain was measured with a numeric rating scale and by measuring vital signs. Discomfort and depression were measured with self-administered questionnaires. Results. Patients who received music therapy had a lower degree of pain than patients who did not receive music therapy as measured by the numeric pain score (p < 0.001), systolic blood pressure (p < 0.01), diastolic blood pressure (p < 0.001), pulse rate (p < 0.001) and respiration (p < 0.001). Patients who were provided with music therapy also had a lower degree of discomfort than patients who were not provided with this therapy (p < 0.01). Effects of Music Therapy on Pain, Discomfort, and Depression for Patients with Leg Fractures Conclusions. These results demonstrate that music therapy is an effective method for decreasing pain and discomfort for patients with leg fractures.

• 음성과학
• /
• 제11권3호
• /
• pp.131-142
• /
• 2004

Speaker identification system basically functions by comparing spectral energy of an individual production model with that of an input signal. This study aimed to develop a new speaker identification system from two parameters from the spectral energy of numeric sounds: difference sum and correlation coefficient. A narrow-band spectrogram yielded more stable spectral energy across time than a wide-band one. In this paper, we collected empirical data from four male speakers and tested the speaker identification system. The subjects produced 18 combinations of three-digit numeric. sounds !en times each. Five productions of each three-digit number were statistically averaged to make a model for each speaker. Then, the remaining five productions were tested on the system. Results showed that when the threshold for the absolute difference sum was set to 1200, all the speakers could not pass the system while everybody could pass if set to 2800. The minimum correlation coefficient to allow all to pass was 0.82 while the coefficient of 0.95 rejected all. Thus, both threshold levels can be adjusted to the need of speaker identification system, which is desirable for further study.

• 중환자간호학회지
• /
• 제3권1호
• /
• pp.53-65
• /
• 2010

Purpose: The purpose of this study was to identify the intensity and types of discomfort caused by an endotracheal tube in patients during ventilator therapy after cardiac surgery, and to analyze the differences in the intensity and types of discomfort by sociodemographic and clinical characteristics and characteristics related to endotracheal tubes. Methods: The intensity of discomfort was measured using an 11-point numeric rating scale and the types of discomfort were measured using a 4-point numeric rating scale. Sociodemographic and clinical characteristics and characteristics related to endotracheal tube were collected by observation and the electronic medical chart using a structured questionnaire. Results: The mean intensity of discomfort in patients due to endotracheal tubes was 6,91 points, 84% of patients reported discomfort over 5 points, The most severe discomfort was pain during endotracheal suctioning, and dry mouth and breathing difficulties were also found to induce discomfort. Patients who had more severe surgical site pain, longer duration of intubation and higher cuff pressure demonstrated more severe discomfort due to the endotracheal tube. Conclusion: These results can be used as basic data for developing nursing intervention to relieve the discomfort caused by endotracheal tubes in patients during ventilator therapy.

• Journal of Gastric Cancer
• /
• 제21권3호
• /
• pp.236-245
• /
• 2021

Purpose: The numeric N stage has replaced the topographic N stage in the current tumor node metastasis (TNM) staging in gastric carcinoma. However, the usefulness of the topographic N stage in the current TNM staging system is uncertain. We aimed to investigate the prognostic value of the topographic N stage in the current TNM staging system. Materials and Methods: We reviewed the data of 3350 patients with gastric cancer who underwent curative gastrectomy. The anatomic regions of the metastatic lymph nodes (MLNs) were classified into 2 groups: perigastric and extra-perigastric. The prognostic value of the anatomic region was analyzed using a multivariate prognostic model with adjustments for the TNM stage. Results: In patients with lymph node metastasis, extra-perigastric metastasis demonstrated significantly worse survival than perigastric metastasis alone (5-year survival rate, 39.6% vs. 73.1%, respectively, P<0.001). Extra-perigastric metastasis demonstrated significantly worse survival within the same pN stage; the multivariate analysis indicated that extra-perigastric metastasis was an independent poor prognostic factor (hazard ratio=1.33; 95% confidence interval=1.01-1.75). The anatomic region of the MLNs improved the goodness-of-fit (likelihood ratio statistics, 4.57; P=0.033) of the prognostic model using the TNM stage. Conclusions: The anatomic region of MLNs has an independent prognostic value in the numeric N stage in the current TNM staging of gastric carcinoma.

• 한국농공학회논문집
• /
• 제59권2호
• /
• pp.81-90
• /
• 2017

Recent floodplain data are important for river master plan, storm and flood damage reduction comprehensive plan and pre-disaster impact assessment. Hazard map, base of floodplain data, is being emphasized as important method of non-structural flood prevention and consist of inundation trace map, inundation expected map and hazard information map. Inundation trace map describes distribution of area that damaged from typhoons, heavy rain and tsunamis and includes identified flood level, flood depth and flood time from flooding area. However due to lack of these data by local government, which are foundational and supposed to be well prepared nationwide, having hard time for making inundation trace map or hazard information map. To overcome this problem, time consumption and budget reduction is required through various research. From this study, DEM (Digital Elevation Model) from image material from UAVS (Unmanned Aerial Vehicle System) and numeric geographic map from National Geographic Information Institute are used for calculating flooding damaged area and compared with inundation trace map. As results, inundation trace map DEM based on image material from UAVS had better accuracy than that used DEM based on numeric geographic map. And making hazard map could be easier and more accurate by utilizing image material from UAVS than before.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2002년도 춘계학술대회논문집
• /
• pp.205-208
• /
• 2002

The vericut is one of the best CAM application for manufacturing data verification system. It is much applied in most manufacturing company for checking the manufacturing work. Using it a off-line manufacturing system is connected for on-line working on local area network. First, we choose the serial communication to chain an off-line manufacturing system and a personal computer which link with the server running the vericut.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.126-131
• /
• 2001

Materials property data are necessary to secure the reliability of failure prevention techniques such as inspection and remaining life assessment of civil infrastructure and industrial facilities. However, there is no properly collected data in Korea, and those foreign data are hard to use because of the scattering of the sources, the difference of standards, etc. In this paper, materials property database system which has been constructed at Korea Research Institute of Standards and Science is introduced. Constructed database contains 145,000 numeric data of materials property for 600 kinds of metals and can be retrieved on the internet. The database system provides graphical user interface-based information searching functions necessary for the life evaluation and safety analysis.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(1)
• /
• pp.286-290
• /
• 2003

Accurate acquisition of surface geometries such as machined surfaces, biological surfaces, and deformed parts have been very important technique in scientific study and engineering, expecially for system design, manufacturing and inspection. Two camera method keeps accuracy more than double than mechanical method. In this paper, we describe the processes surface data of teeth for automatic processing, transformation that changes to coping data of possible numeric data form and processed inlay teeth. As the result of the Inlay manufacture, which can process with high resolution, therefore we construct the automatic processing system that depends on manual