• Journal of the Korean earth science society
• /
• v.32 no.6
• /
• pp.602-612
• /
• 2011

Jeju Island, a volcanic island located in South Korea, has been one of the main targets of geophysical and/or geological studies because of its tectonic importance related to the volcanism and tectonic link to the southern part of the Korean Peninsula. Recently, as a number of broad-band magnetotelluric (MT) measurements were made, we have examined the deep part of the island. In such an insular setting, it is not easy to properly recover the deep structures such as the lower crust and the upper crust using MT data, because their low-frequency components are strongly affected by the surrounding sea of the island. In this study, we apply the sea-effect correction to the existing MT data collected at a total of 102 sites in Jeju Island. The sea-effect correction makes remarkable changes in the observed MT data at frequencies below 1 Hz, clearly indicating the existence of a conductive lower crust. The 2-D inversion results for both Jeju Southern Line (JSL) and Jeju Northern Line (JNL) show that the transition zone separating the resistive upper crust and conductive lower crust exists at a depth of 20 km on average.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.20 no.2
• /
• pp.105-111
• /
• 1984

Recently, Hybrid Navigation Systems combining Omega, NNSS, Loran C and Dead reckoning etc. served to give us highly accurate ship's position, and a number of ships are equipped with these navigation systems. In order to evaluate for the accuracy of this navigation system observations of Loran C, 5970 and 9970 chains and Radar at the same time were made on board m.s Jeonbuk 401 and 403 training ships of Gunsan Fisheries Collage at nine stations in the yellow sea from July, 1982 to June, 1983, and then were done by the Hybrid Navigation System combining Dead reckoning and Loran C at the same areas. The authors investigated the accuracy of the Hybrid Navigation System based on measurements of the relative positional error which is defined as the difference between the position fixed by this system or the Loran C system, and the one by the Radar. The obtained results are as follows; 1. The mean standard deviation of the time difference of Loran C were about 0.21$\mu$s in 9970 chain and about 0.06$\mu$s in 5970 chain, and the fluctuation of the time difference of Loran C in 5970 chain was smaller than that in 9970 chain. 2. The positional error between two positions by Radar and the Hybrid Navigation System in 9970 chain was about 0.4 miles, and between two positions by Radar and Loran C was about 0.51 miles. The Hybrid Navigation System was therefore more accurate than Loran C System. 3. The positional error between two positions by Radar and Hybrid Navigation System in 5970 chain was about 0.4 miles, and between two positions by Radar and computer simulation of Loran C was about 0.98 miles. Consequently, Hybrid Navigation System was more accurate than computer simulation of Loran C system.

• Journal of Microbiology and Biotechnology
• /
• v.30 no.5
• /
• pp.649-661
• /
• 2020

This study examined the laxative effects of hot-water extracts of Hovenia dulcis Thunb. (HD), Phyllostachys pubescens Mazel (PM), and a 2:8 mixture of both (HP) in two chronic constipation models. For the loperamide-induced constipation model, animals were divided into an untreated group, negative control group (loperamide 4 mg/kg), positive control group (bisacodyl 4 mg/kg) group, and six treatment groups (HP 100 or 400, HD 50 or 100, and PM 100 or 400 mg/kg). For the low-fiber diet-induced constipation model, animals were divided into an untreated group (normal diet), negative control group (low-fiber diet), positive control group (Agio granule, 620 mg/kg), and the same treatment groups. Fecal number, weight, fecal water content, and intestinal transit ratio were higher in the groups treated with HP, HD, and PM than in the groups treated with loperamide or low-fiber diet. Thickness of colon mucosa and muscle layers were increased in the treated groups. Colon tension increased in the HP groups, and [Ca²⁺]i measurements using fura-2 as an indicator showed that HP inhibits ATP-mediated Ca²⁺ influx in IEC-18 cells. These results showed that the HP mixture has laxative activity by increased mucin secretion and inducing contractile activity and relaxation. It may be a useful therapeutic strategy for ameliorating in chronic constipation.

• Journal of Energy Engineering
• /
• v.17 no.4
• /
• pp.189-197
• /
• 2008

In this study, a system to measure continuously the fuel concentration in a steady flow rig on the basis of Rayleigh scattering is presented. The system can be employed to measure both the temporal and the spatial distribution. Also, it is possible to calibrate the system for the measurement of accurate absolute concentration. Firstly, the system was tested at a calibration chamber for the determination of scattering cross section from propane, butane, acetylene, Freon-12 and Genetron 143a. After this, the system was adapted to a steady flow rig to measure the temporal and spatial fuel concentration. The rig is composed of cylinder head, intake manifold, injector, and transparent cylinder which can simulate internal combustion engine. To cope with the interference of Mie scattering, which is main obstacle of the measuring concentration with Rayleigh scattering, a hardware filter was installed for reducing the number density of particles. Furthermore a software filter was developed, which is based on the rise time and the time constant of the photomultiplier-amplifier system. In addition, background noisy was reduced by adjusting the optical array and applying the pin hall and beam trap. The results show that LRS can provide useful information about concentration field and the software filter is very effective method to remove Mie interference.

• Journal of Community Nutrition
• /
• v.1 no.2
• /
• pp.98-107
• /
• 1999

The purpose of this study was to investigate Bone Mineral Density(BMD) and affecting factors on BMD of college women in Seoul. The subjects were 47 healthy college women aged 18-25 years. Antrophometric and body fat measurements were performed by Bioelectrical Impedance Fatness Analyzer(Tanita TVF 202). Blood pressure and pulse frequency were measured. Dietary intakes and general living habits were examined through questionnaires and nutrient intakes were analyzed by Computer Aided Nutritional Analysis(CAN) program for professional. Serum total cholesterol, TG(triglyceride), HDL-cholesterol, total protein, albumin, GOT, calcium were measured by Spotchem(SP-4410). Serum osteocalcin and alkaline phosphatase(ALP) were measured to monitor bone formation. BMD of lumbar spine(L2-L4), right hip(neck, ward's triangle, trochanter) and right forearm were measured by Dual Energy X-ray Absorptiometry(DEXA). Muscle strength was measured by examining leg flexion strength(right and left), leg extension power(right and left), handgrip power(right and left) and back strength. All data were statistically analyzed by the SAS PC package program. BMD of college women was normal(by WHO, 1994). Their muscle strength was bad(by national fitness guidebook, 1995). Only a mall number of them exercised (32.6% of subjects). There was no significant difference among BMD, muscle strength and % body fat(p<0.05). There were significant differences between BMD and total cholesterol as well as TG and VLDL-cholesterol(p<0.05). Total cholesterol was associated with decreasing BMD of the right forearm(p<0.05). TG and VLDL-cholesterol are associated with increasing BMD of right hip ward's triangle(p<0.05). There were significant differences among BMD, ALP and serum total protein. ALP was associated with decreasing BMD of the right forearm(p<0.05). There were significant differences between BMD and Ca as well as between Na and K intakes (p<0.05). Intakes of Na and K were associated with decreasing BMD of the right forearm (UD)(p<0.05). There were significant differences between in BMD and pulse frequently and serum albumin (p<0.05). Serum albumin is associated with increasing BMD of L3-L4(p<0.05), right hip neck(p<0.05). %Body fat, TG, VLDL-C, Ca intake, pulse frequency and serum albumin were associated with increasing BMD(p<0.05). Intakes of Na and K, ALP, total cholesterol, total cholesterol, total protein and height are associated with decreasing BMD(p<0.05). Overall results indicate that Ca intake but to be moderate in protein and Na intakes in order to increase BMD. Body exercise was recommended to increase BMD as well.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.31 no.1
• /
• pp.193-212
• /
• 2020

In Korea, the term 'public library service population' is applied in various situations without academic discourse. This study analyzed concepts and applications of the term with literary reviews and case studies in United States, Australia, Japan, and Korea. And also this study redefined concepts and suggested new measurements of 'design population' and 'service population.' The former is the population who lives in area where public library can serve, and only demographic characteristics can be identified. It can be calculated based on the population of administrative district. In case of urban areas with a population of more than 100,000, it can be calculated the population within a radius of 2km from library. In areas with a population of less than 100,000 it can be calculated based on the population of Eup, Myeon, and Dong. In both cases the estimated population up to the library's opening year is added. Service population is used for the planning, evaluating, and promoting library services, and it can be defined as the actual users or estimated population determined by the input resources of the public libraries. It can be calculated by the number of enrolled members, or service participants, or target populations according to the size of input resources. The advantages of the proposal in this study are enabling efficient facility placement or resource inputs in public libraries and enhancing reliability of measuring output versus input. In addition, this study proposed to delete for paragraph 1 of Article 3 of the Library Act to avoid confusion.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.25 no.4
• /
• pp.245-257
• /
• 2023

The representative crop in the Republic of Korea, rice, is cultivated over extensive areas every year, which resulting in reduced resistance to pests and diseases. One of the major rice diseases, rice blast disease, can lead to a significant decrease in yields when it occurs on a large scale, necessitating early detection and effective control of rice blast disease. Drone-based crop monitoring techniques are valuable for detecting abnormal growth, but frequent image capture for potential rice blast disease occurrences can consume significant labor and resources. The purpose of this study is to early detect rice blast disease using remote sensing data, such as drone and satellite images, along with weather data. Satellite images was helpful in identifying rice cultivation fields. Effective detection of paddy fields was achieved by utilizing vegetation and water indices. Subsequently, air temperature, relative humidity, and number of rainy days were used to calculate the risk of rice blast disease occurrence. An increase in the risk of disease occurrence implies a higher likelihood of disease development, and drone measurements perform at this time. Spectral reflectance changes in the red and near-infrared wavelength regions were observed at the locations where rice blast disease occurred. Clusters with low vegetation index values were observed at locations where rice blast disease occurred, and the time series data for drone images allowed for tracking the spread of the disease from these points. Finally, drone images captured before harvesting was used to generate spatial information on the incidence of rice blast disease in each field.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.46 no.4
• /
• pp.199-208
• /
• 2023

Taguchi method is one of the most popular approaches for design optimization such that performance characteristics become robust to uncontrollable noise variables. However, most previous Taguchi method applications have addressed a single-characteristic problem. Problems with multiple characteristics are more common in practice. The multi-criteria decision making(MCDM) problem is to select the optimal one among multiple alternatives by integrating a number of criteria that may conflict with each other. Representative MCDM methods include TOPSIS(Technique for Order of Preference by Similarity to Ideal Solution), GRA(Grey Relational Analysis), PCA(Principal Component Analysis), fuzzy logic system, and so on. Therefore, numerous approaches have been conducted to deal with the multi-characteristic design problem by combining original Taguchi method and MCDM methods. In the MCDM problem, multiple criteria generally have different measurement units, which means that there may be a large difference in the physical value of the criteria and ultimately makes it difficult to integrate the measurements for the criteria. Therefore, the normalization technique is usually utilized to convert different units of criteria into one identical unit. There are four normalization techniques commonly used in MCDM problems, including vector normalization, linear scale transformation(max-min, max, or sum). However, the normalization techniques have several shortcomings and do not adequately incorporate the practical matters. For example, if certain alternative has maximum value of data for certain criterion, this alternative is considered as the solution in original process. However, if the maximum value of data does not satisfy the required degree of fulfillment of designer or customer, the alternative may not be considered as the solution. To solve this problem, this paper employs the desirability function that has been proposed in our previous research. The desirability function uses upper limit and lower limit in normalization process. The threshold points for establishing upper or lower limits let us know what degree of fulfillment of designer or customer is. This paper proposes a new design optimization technique for multi-characteristic design problem by integrating the Taguchi method and our desirability functions. Finally, the proposed technique is able to obtain the optimal solution that is robust to multi-characteristic performances.

• The Journal of the Acoustical Society of Korea
• /
• v.31 no.3
• /
• pp.115-128
• /
• 2012

This paper investigates the effects of diffuser on the acoustical parameters in music hall with consideration of the result of scattering coefficient measurement. A scale model hall of 600 seats with orchestra shell was used for experiments. The materials of 1:50 scale model was chosen through absorption coefficient measurement based on ISO 354. The model was matched to the computer simulation model in terms of reverberation time. In order to evaluate the effect of diffuser location, the measurements were accomplished with and without diffusers according to 7 configurations by diffuser-installed region; sidewall, balcony front, ceiling and so on. The following acoustical parameters were extracted from each measurement case; Reverberation time (RT), Early decay time (EDT), Clarity (C80), Center time (Ts), Sound strength (G) and Temporal diffusion (TD) from the auto-correlation function (ACF) of impulse responses. As a result, the absorption power and diffusion power were increased with number of diffusers. Accordingly RT, EDT and G were decreased by diffuser and the redirection of reflections was occurred briskly. Averaged TD was 6.05 to 6.30 by measurement cases. RT was found to be the most related factor to diffusion power (R = 0.94). The correlation between TD and EDT was high (R = 0.73). In addition, the effects of diffuser-installed location were discussed in terms of acoustical parameter variation.

• Horticultural Science & Technology
• /
• v.35 no.4
• /
• pp.431-438
• /
• 2017

This study investigated the effect of pre-planting nitrogen (N) fertilization levels added to a soilless root medium on the growth of 'Dotaerang Dia' tomato seedlings. The N levels were varied for a total of 7 treatments: 0, 100, 250, 500, 750, 1,000, or $1,500mg{\cdot}L^{-1}$. The pH of the root media gradually rose in all treatments as the seedlings grew; however, the differences in the pH were not significant among the treatments. The electrical conductivity (EC) of the root media was significantly different among the treatments from sowing to week three, then drastically decreased after week four, which diminished the differences in the EC among the treatments. At week six, plant height, leaf length, leaf width, number of leaves, and fresh and dry weights of the shoot were highest for the treatment with $500mg{\cdot}L^{-1}N$. In contrast, the treatment with $1,500mg{\cdot}L^{-1}N$ had the lowest results for all growth measurements. The fresh weight was 67% heavier in the $500mg{\cdot}L^{-1}N$ treatment compared to the $1,500mg{\cdot}L^{-1}N$ treatment. The total N content in the tissues was lowest in the treatment with $0mg{\cdot}L^{-1}N$ and highest in the treatment with $1,000mg{\cdot}L^{-1}N$. The contents of calcium (Ca), magnesium (Mg), and metal micronutrients in the tissues were highest in the $250mg{\cdot}L^{-1}N$ treatment. A previous study demonstrated that adjusting the fertilization level to promote growth to over 90% of the maximum growth is a good strategy for lowering production costs and preventing damage due to excessive fertilizer absorption by crops. Our results indicated that the optimal pre-planting N fertilization level for tomato plug seedlings should be lower than $500mg{\cdot}L^{-1}$ and the optimum tissue N contents should be around 3.21% to 4.60%.