기존의 흙을 사용하여 건설된 철도 노반은 반복적인 교통하중의 증가, 열차속도의 향상, 노반상으로의 지하수의 유입, 노반의 배수능력 저하 등의 이유로 인해 시간경과에 따라 쉽게 그 기능을 상실할 수 있다. 본 연구에서는 실대형시험과 수치해석을 수행함으로씨 철도노반으로서의 쇄석강화노반의 성능을 평가하였다. 쇄석강화노반의 탄$.$소성 연직변위는 모사열차하중의 재하횟수에 관계없이 일반 흙노반에 비해 작은 응답특성을 보였으며, 동일한 노반 부설두께에서는 노반반력계수의 증가에 따라 감소하며, 동일한 강성인 경우 노반 부설두께 증가에 따라 감소하는 경향을 보였다. 하지만, 쇄석강화노반의 부설두께에 비해 노반의 강성이 궤도에 발생하는 전체 소성 연직변위에 더욱 큰 영향을 미치는 것으로 평가되었다.
This study investigates the effects of loading frequency (f) and specimen size on the liquefaction resistance of clean sand. A series of cyclic direct simple shear tests were conducted on Jumunjin sand with varying consolidated relative densities (40% and 80%), f values (0.05, 0.10, and 0.20 Hz), and diameter to height (D/H) ratios (3.63, 3.18, 2.82, and 2.54). The results demonstrated the significant influence of f and D/H ratio on the number of cycles to liquefaction (Ncyc-liq) and the cyclic resistance ratio (CRR15). It was observed that increasing f linearly increased Ncyc-liq. Increasing the specimen height also led to higher Ncyc-liq values irrespective of the f or relative density. Moreover, a positive correlation between CRR15 and f indicated that higher f yielded higher CRR15. This relationship was more pronounced in dense sand than in loose sand. Specimen height also significantly affected CRR15, with increasing the specimen height resulting in higher CRR15 values. Furthermore, the effect of f on CRR15 was less significant compared to the influence of specimen height. The effect of f on the normalized cyclic resistance ratio (NCRR) was relatively negligible for loose sand but more substantial for dense sand depending on the D/H ratio. Data analysis revealed that the NCRR generally decreases as the D/H ratio increases. An interpolation formula was provided to calculate the NCRR based on the D/H ratio regardless of the f and relative density.
표면이 매끄럽고 돌기가 있는 2가지 HDPE 지오멤브레인 덤벨형 시료에 두께 10% 간격으로 10~90% 깊이의 노치를 가하여 실험에 사용하였다. ISO 10722에 의거하여 부가하중 횟수를 변화시켜 시공시 손상의 실내 모사시험을 HDPE 지오브레인에 실시하였으며, 부가하중 횟수가 시공시 손상에 미치는 영향을 비교하였다. 항복응력과 변형률은 노지 깊이가 커짐에 따라 감소하였다. 손상된 그리고 노치를 가한 지오멤브레인을 응력균열시험에 사용하였으며, $50{\pm}1^{\circ}C$에서 pH 4와 12 용액에 침지시켜 항복응력 변화에 따른 응력균열저항성을 NCTL 시험을 통하여 고찰하였다. 인장 강도의 35% 이상에서 지오멤브레인은 응력균열에 취약함을 나타냈으며, 손상을 받은 그리고 노치를 가한 지오멤브레인 모두 같은 경향을 나타내었다. 특별히 노치를 가한 지오멤브레인의 경우 각각의 응력균열 조건에서 시공에 의해 손상된 지오멤브레인보다 낮은 강도를 나타내었다.
본 논문에서는 인장부위가 결손된 철근콘크리트 단순보를 제작하여 유기계 보수재료로서 폴리머계(에폭시, 폴리에스터), 유.무기 혼합 보수재료로서 폴리머-시멘트계(라텍스, 프리믹스), 그리고 부기계 보수재료로서 시멘트계(그라우트)등으로 주입 또는 팻칭의 방법으로 보수한 시험체에 대해 피로실험을 수행하였다. 피로실험은 3점 휨 실험법으로 실시하였으며, 실험시 각 시험체의 하중반복횟수에 대한 보수재의 부착성능, 중앙처짐과 피로파괴시의 반복횟수를 조사하였다. 이들 실험결과를 토대로 반복횟수에 대한 각 보수시험체의 균열 및 파괴양상, 중앙처짐 등을 비교 분석하였으며, 피로강도를 예측하기 위한 S-N선도를 작도하였다. 연구결과, 콘크리트 모체와 보수재와의 부착성능은 폴리머계로 보수한 시험체가 가장 우수하였고, 폴리머-시멘트계 및 시멘트계로 보수한 시험체의 경우는 보수 접합면을 따라 균열이 진전되었다. 반복횟수에 대한 보수시험체의 중앙처짐은 사용하중 상태인 응력수준 60%에서는 모든 보수시험체가 무보수시험체와 유사한 경향을 보였으나 응력수준이 증가할수록 폴리머-시멘트계로 보수한 시험체만이 무보수시험체와 가장 유사한 경향을 나타냈다. 또한 본 피로실험 결과를 회귀분석하여 구한 S-N선도에 의하면 콘크리트 모체와 유사한 재료적 특성을 지닌 폴리머-시멘트계로 보수한 시험체가 무보수 시험체의 피로특성과 가장 유사한 것으로 드러났다.
철근과 콘크리트의 부착은 콘크리트와 철근의 일체거동에 의한 안전성 확보를 위해서도 필요하지만, 적정수준의 연성을 확보하여, 부재의 거동을 조절하기 위해서도 필요하다. 현재까지 반복하중 하에서의 부착응력-슬립관계에 대한 연구는 진행되어 왔으나, 철근 부식이 이루어진 경우의 반복하중 하에서의 부착응력-슬립관계에 대한 연구는 거의 없는 실정이다. 따라서 이 연구에서는 부식된 철근의 부착 실험을 통하여 단조하중과 반복하중 하에서의 부식률에 따른 부착응력-슬립 관계를 살펴보았다. 실험결과로부터 철근 부식은 할열 균열이 발생하기 전까지는 단조하중에서의 부착강도를 증가시키는 것을 확인하였다. 그리고 반복하중 횟수와 반복하중 하에서의 슬립 및 잔류슬립을 이중로그스케일로 도시한 결과, 철근 부식이 있는 경우에도 철근 부식이 없는 경우와 마찬가지로 선형 관계임을 확인하였다. 그리고 부식에 의한 균열이 발생하지 않는 한, 철근 부식이 반복하중 재하 이후의 부착강도 및 부착강도에서의 슬립 등 부착 특성에 영향을 미치지 않는 것도 알 수 있었다. 마지막으로, 철근 부식으로 인한 균열이후에서의 응력수준에 따른 피로수명은 급격히 감소하는 것을 확인하였다. 이 연구에서 제시하는 철근 부식을 고려한 반복하중 하에서의 부착응력-슬립의 관계는 철근콘크리트 구조물의 내구수명 예측 시 유용하게 사용될 수 있을 것으로 사료된다.
실내 시험기에 의하여 3가지 타입의 지오그리드의 시공 시 손상을 압밀조건에 따라 평가하였다. 이 실험은 ENV ISO 10722-1에 근거하여 실행되었다. 우선 실험에 사용된 흙 입자의 입도분석과 함수비를 측정하였다. 그리고 내시공성에 영향을 주는 인자로서 반복하중과 지오그리드의 타입을 변화시켰다. 실험에 사용된 시료는 6, 8, 10T woven, warp-knitted, welded type의 지오그리드이다. 이 실험은 반복하중과 감소계수의 관계를 설명하기 규명하기 위하여 진행되었다. 실험 결과 반복하중은 지오그리드의 손상과 밀접한 관련이 있었다. 특히, welded type의 지오그리드의 경우는 다른 종류의 지오그리드보다 더 낮은 감소경향을 보였는데 이는 coating material 때문이다. 즉 welded type의 지오그리드는 피복 재료가 PP이나 나머지 다른 두 종류의 경우 PVC로 되어있다. 다짐 횟수 이외의 감소 계수를 측정하기 위하여 실험을 하였다. 흙 입자의 크기가 9.5mm이상 23.5mm이하인 자갈을 가지고 다시 내시공성 시험을 하였다. 시료 포설 전 흙의 다짐 횟수를 200회로 하였으며, 그 이유는 이때의 감소계수가 다른 조건보다 더 크기 때문이었다.
해상풍력발전기의 기초로 사용되는 단말뚝은 풍력과 파랑하중에 의해 큰 크기의 반복수평하중을 받는다. 본 연구에서는 모래지반에서 반복수평하중을 받는 항타말뚝의 거동 특성을 조사하기 위해서 가압토조와 길이가 다른 3개의 모형말뚝을 이용해서 모형말뚝재하시험을 수행하였다. 실험결과에 따르면 하중의 최초 재하는 그 이후에 가해지는 반복재하보다 말뚝의 수평변위를 크게 발생시키고, 반복하중의 재하횟수가 증가함에 따라 1회 재하로 인해 발생하는 말뚝의 수평변위량은 감소하는 것으로 나타났다. 하중의 한방향 반복재하는 말뚝의 영구수평변위를 재하방향으로 증가시킨 반면, 양방향 반복재하는 최초 재하방향과 반대방향으로 말뚝의 영구수평변위를 증가시켰다. 그리고 반복 하중으로 인한 말뚝의 영구수평변위는 지반의 상대밀도가 감소하거나 말뚝에 가해지는 반복하중의 크기가 커질수록 급격히 증가하였고, 지반의 토압계수나 말뚝의 근입길이 변화에는 크게 영향을 받지 않았다. 또한 모형실험의 결과에 근거해서 하중이 한방향으로 반복재하될 때 말뚝의 영구수평변위와 영구회전각을 예측할 수 있는 산정식을 제안하였다.
Cement-based sensors have been widely used as structural health monitoring systems, however, their long-term sensing performance have not actively investigated. In this study, a deep learning-based methodology is adopted to predict the long-term piezoresistive properties of cement-based sensors. Samples with different multi-walled carbon nanotube contents (0.1, 0.3, and 0.5 wt.%) are fabricated, and piezoresistive tests are conducted over 10,000 loading cycles to obtain the training data. Time-dependent degradation is predicted using a modified long short-term memory (LSTM) model. The effects of different model variables including the amount of training data, number of epochs, and dropout ratio on the accuracy of predictions are analyzed. Finally, the effectiveness of the proposed approach is evaluated by comparing the predictions for long-term piezoresistive sensing performance with untrained experimental data. A sensitivity of 6% is experimentally examined in the sample containing 0.1 wt.% of MWCNTs, and predictions with accuracy up to 98% are found using the proposed LSTM model. Based on the experimental results, the proposed model is expected to be applied in the structural health monitoring systems to predict their long-term piezoresistice sensing performances during their service life.
This study explores the lateral deflections of diagonal braces in concentrically-braced earthquake-resisting frames. The performance of this widely-used system is often compromised by the flexural buckling of slender braces in compression. In addition to reducing the compressive resistance, buckling may also cause these members to undergo sizeable lateral deflections which could damage surrounding structural components. Different approaches have been used in the past to predict the mid-length lateral deflections of cyclically loaded steel braces based on their theoretical deformed geometry or by using experimental data. Expressions have been proposed relating the mid-length lateral deflection to the axial displacement ductility of the member. Recent experiments were conducted on hollow and concrete-filled circular hollow section (CHS) braces of different lengths under cyclic loading. Very slender, concrete-filled tubular braces exhibited a highly ductile response, undergoing large axial displacements prior to failure. The presence of concrete infill did not influence the magnitude of lateral deflection in relation to the axial displacement, but did increase the number of cycles endured and the maximum axial displacement achieved. The corresponding lateral deflections exceeded the deflections observed in the majority of the previous experiments that were considered. Consequently, predictive expressions from previous research did not accurately predict the mid-height lateral deflections of these CHS members. Mid-length lateral deflections were found to be influenced by the member non-dimensional slenderness (${\bar{\lambda}}$) and hence a new expression was proposed for the lateral deflection in terms of member slenderness and axial displacement ductility.
Self-piercing riveting(SPR) is a mechanical fastening technique which is put pressure on the rivet for joining the sheets. Unlike a spot welding, SPR joining does not make the harmful gas and $CO_2$ and needs less energy consumption. In this study, static and fatigue tests were conducted using tensile-shear specimens with Al-5052 plates for evaluation of fatigue strength of the SPR joints. During SPR joining process for the specimen, using the current sheet thickness and a rivet, the optimal applied punching force was found to be 21 kN. And, the maximum static strength of the specimen produced at the optimal punching force was 3430 N. During the fatigue tests for the specimens, interface failure mode occurred on the top substrate close to the rivet head in the most high-loading range region, but on the bottom substrate close to the rivet tail in the low -loading range region. There was a relationship between applied load amplitude $P_{amp}$ and lifetime of cycle N for the tensile-shear, $P_{amp}=3395.5{\times}N^{-0.078}$. Using the stress-strain curve of the Al-5052 from tensile test, the simulations for fatigue specimens have been carried out using the implicit finite element code ABAQUS. The relation between von-Mises equivalent stress amplitude and number of cycles was found to be ${\sigma}_{eq}=514.7{\times}N^{-0.033}$.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.