• 한국산학기술학회논문지
• /
• 제21권3호
• /
• pp.156-163
• /
• 2020

본 연구는 호남지역 유휴 논토양에서 곡실 사료용 밀 생산에 적합한 품종 선발을 위해 국내산 총 8개(금강, 조경, 백중, 수안, 청우, 고소, 호중, 조중)의 품종을 선택하여 전북 완주군에서 2015년부터 2016년까지 파종 및 수확하였으며, 사료가치 평가를 위해 일반성분 및 반추위 소화율 분석을 실시하였다. 시험품종 중 출수기는 "조중"이 4월 15일로 가장 빨랐으며, 성숙기 또한 5월 24일로 가장 빨랐다. "백중"의 출수기는 4월 18일로 "금강"과 같았고, 성숙기는 5월 29일로 하루 늦었지만 전 시험품종 간의 유의성은 없었다. 경수는 "고소"가 513개/㎡로 가장 적었으며, "청우"가 974개/㎡로 가장 많았다. "백중"의 경수는 901개/㎡로 시험품종 중 경수가 많은 품종에 속하며, 수확량은 542kg/10a으로 가장 많았다(p<0.05). 일반성분 분석, 반추위내 건물 및 조단백질 소화율 평가에서 시험품종 간 유의적인 차이는 보이지 않았으며, 옥수수보다 높은 영양 가치와 소화율을 확인하였다. 따라서 상기 8개 밀 품종은 공히 수입곡물을 대체 할 수 있는 훌륭한 사료자원이며, 수확량이 높은 품종을 선택하여 곡실 사료로의 이용성을 확대하면, 논경지이용효율 증대와 더불어 축산농가 사료비 절감에 도움이 될 것으로 사료된다.

• 광물과산업
• /
• 제26권
• /
• pp.13-21
• /
• 2013

본 연구는 저품위 회중석을 최종 선별처리 하기에 앞서 비교적 조립자에서 많은 양의 맥석을 제거하여 경제적이며 효율적인 선별기술을 개발하는데 있다. 일반적으로 저품위 회중석의 경우 1차 조선정광을 얻기 위해 지그나 스파이랄 등의 비중선별기가 사용되지만, 본 연구에서는 KC3 Knelson Concentrator를 이용한 연구를 수행하였다. 시료는 파쇄와 분쇄과정을 거쳐 1mm 이하로 준비하였으며, 주요 실험변수로 처리횟수, 시료 급광량, Bowl의 회전속도(G Force), 급수량, 자성산물 사전제거, 시료입도 그리고 시료품위 변화 등이 1차 조선정광 회수에 미치는 영향을 관찰하였다. KC3 Knelson Concentrator를 이용한 비중선별 실험결과 처리횟수, 급광량, 시료입도 그리고 원 시료의 품위($WO_3%$) 등이 선별효율에 영향을 미치는 주요 실험변수임을 확인하였다. 실험결과 최적실험 조건에서 텅스텐의 품위와 회수율이 각각 $3.0%WO_3$와 90%인 1차 조선정광을 얻었다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제24권2호
• /
• pp.250-257
• /
• 2011

An experiment was conducted to determine the effects of different mycotoxin adsorbents including esterified glucomannan (EGM), hydrated sodium calcium aluminosilicate (HSCAS) and compound mycotoxin adsorbent (CMA) on performance, blood parameters, and liver pathological changes in broilers fed mold-contaminated feed. Two hundred and forty 10-day-old broilers were randomly assigned to one of the five dietary treatments including: i) control diet; ii) mold-contaminated diet; iii) moldcontaminated diet+0.05% EGM; iv) mold-contaminated diet+0.2% HSCAS; v) mold-contaminated diet+0.1% CMA. At 35-days-old, blood and liver tissue samples were collected for analysis. 0.1% CMA improved ADG and ADFI during 10-42 d compared to the moldcontaminated group (p<0.05). The mold-contaminated diet increased total white blood cell (WBC) number, haemoglobin (Hgb) concentration, hematocrit (Hct) level, serum aspartate aminotransferase (AST) and ${\gamma}$-glutamyl transferase (GGT) activities, and decreased red blood cell (RBC) number and serum globulin (GLB) and urea nitrogen (BUN) concentrations (p<0.05). The three mycotoxin adsorbents alleviated the alteration of RBC, WBC, Hgb and AST caused by the mold-contaminated diet. Furthermore, 0.1% CMA increased GLB concentration and decreased Hct level and GGT activity (p<0.05). Liver superoxide dismutase (SOD) activity was reduced, and myeloperoxidase (MPO) activity was increased by the mold-contaminated diet (p<0.05). Both EGM and HSCAS prevented the increase of MPO activity (p<0.05). Liver lesion, including severe vacuolar degeneration of hepatocytes, was observed in chicks fed the mold-contaminated diet. 0.05% EGM prevented these effects except for biliary hyperplasia and mild vacuolar degeneration. 0.2% HSCAS showed medium vacuolar degeneration of hepatocytes. Liver of broilers fed 0.1% CMA revealed a mild vacuolar degeneration. These results indicate that a mold-contaminated diet results in adverse effects on blood parameters and liver morphology. 0.05% EGM and 0.2% HSCAS partially alleviated the adverse effects. However, 0.1% CMA almost completely ameliorated the adverse effects.

• 한국산학기술학회논문지
• /
• 제10권12호
• /
• pp.3755-3760
• /
• 2009

본 연구에서는 천연가스 처리공정 및 석유화학 공정의 Saturated gas plant에서 주로 사용되고 있는 탈에탄탑(Deethanizer)에 대한 설계 과정과 재비기의 heat duty를 최소화시킬 수 있는 원료 주입단의 위치를 최적화시켰다. 탈에탄탑의 공정 모사를 위해서 상용성 모사기인 Invensys사의 PRO/II with PROVISION을 사용하였으며, 열역학 모델식으로는 Soave가 변형시킨 Redlich-Kwong 상태방정식을 사용하였다. 본 연구를 통해서 분리를 위한 최소이론단수는 9.02단이며, 최소환류비는 0.62437이며, 최적의 이론단수는 20단이며, 최적의 원료 주입단은 9단이고 이때 재비기의 heat duty의 최소값은 $12.7470{\times}10^6\;KJ/hr$임을 알 수 있었다.

• Ocean and Polar Research
• /
• 제41권1호
• /
• pp.35-46
• /
• 2019

The purpose of this study is to identify factors influencing fish production of shallow-sea aquaculture in South Korea. This study employed the two-way fixed effect and random effect models based on the panel models and also the difference between GMM and system GMM models based on the dynamic panel models using the amount of fish farming production, the number of stocked fry, the number of cultured fish, the amount of inputted feed, the farming area, the number of workers, and the sales price data from 2010 to 2017. First, the two-way fixed effect model of the panel models was selected by panel characteristics, time characteristics and Hausman tests and also the model was statistically significant. As a result of the two-way fixed effect model, the number of stocked fry, the amount of inputted feed, and the number of workers were identified as factors that increase the fish production of shallow-sea aquaculture. However, the number of cultured fish and the sales price were analyzed as factors that reduce the fish production of shallow-sea aquaculture. Second, the system GMM model of the dynamic panel models was selected by Hansen test and Arellano-Bond test in order to identify whether or not the over-discrimination condition is appropriate. Based on the system GMM model, the number of stocked fry, the amount of inputted feed, the number of workers in this year and 1 year ago, the number of cultured fish 2 years ago, and the sale price 3 years ago were analyzed as factors that increase the fish production of shallow-sea aquaculture. However, the amount of fish farming production 1, 2, 3 years ago, the farming area in this year, and the number of cultured fish in this year and 1 year ago were identified as factors that reduce the fish production of shallow-sea aquaculture. In conclusion, this study suggests that it is desirable to control the amount of stocked fry rather than to expand the farming area for fish farming in shallow-sea aquaculture, so as to keep the sale price at a certain level by maintaining the appropriate amount of fish production.

• 대한수의학회지
• /
• 제14권2호
• /
• pp.237-241
• /
• 1974

A number of chemotherapeutic agents, namely antibiotics, sulfonamides and nitrofuran derivatives have been used, as a fred additive, for the purposes of growth improvement of chicken, increase of feed efficiency, decrease of animal mortality, and disease prevention. In these experiments, furamizole which is one of nitrofuran derivatives and feed additive was test, in field, its antibacterial activity against Mycoplasma gallisepticum causing air sac disease, its effect on pullorum disease control, its effect on the lowering the mortality of chicken and finally the increase of feed efficiency. Throughout the studies, furamizole, in concentration of 0.025% in feed fed to baby chicken continuously resulted as following: 1. Tested chicken showed no avian mycoplasma infection compared to 3.7% outbreak in control chicken. 2. Tested chicken showed a low degree of outbreak of pullorum disease. However, its outbreak was much more surpresed compared to that of control chicken. 3. Total mortality rate of 5.5% and 30.8% were obtained in test and control chicken respectively. 4. Feed efficiency were 2.83 and 2.97 in test and control chicken respectively.

• Journal of Biosystems Engineering
• /
• 제22권4호
• /
• pp.439-450
• /
• 1997

Most of Korean feed mill has a pregrind system which was suitable for the processing of less number of ingredients and finished products, and good for the mash type feed product. But industries has been changed in production volume and cost, and also from mash to further processed products such as pelleted and extruded. Therefore, Korea feed industries now should change the process, especially the grinding system from the current pregrind to other grind system, but this change will cost a lot of investment and also loosing current grinding system, and should have production shut down during the construction period. To solve these problems, combined grinding system based on a new model mill has been developed. The combined grind system is combination of pregrind and postgrind system, which has the advantages of those two grind systems, and also which can allow to utilize existing pregrind system continuously without any production interruption due to new postgrind system construction. This newly developed model has been applied to the feed mill expansion project of `B`feed company in 1994, and it was very successful application and showed excellent results as we intended. The new model mill, combined grind system applied can save fixed asset investment because old pregrind system can be used as is, and also can reduce production cost and improve product quality. And the possibility of critical production shut down can be much lowered. Within this new grinding model development, multi-screen combination system has been developed for the better grinding texture quality and safer operation. This new model mill with combined grind system will be applied by most feed manufacturing plant and may enhance their production competitiveness, and the further study and development should be continued.

• Journal of Nutrition and Health
• /
• 제29권10호
• /
• pp.1105-1111
• /
• 1996

Breast milk production and factors related to milk production were examined by test-weighting method in the part of Kangwon Province longitudinally from 0.5 to 5 months of postpartum. Milk production of total mothers averaged 639, 789, 871, 843, 848 and 851g/day at 0.5, 1, 2, 3, 4 and 5 months of postpartum respectively. Mean Milk production of multiparae appeared significantly higher than those of primiparac. The number of feed per day showed decreasing trend from 9.6 to 8.4 during the lactation. Mature milk production had a correlation with transitional milk production and no correlation with infants weight at birth, gestational period and weight gain during pregnancy of mothers. The energy, protein and lipid consumption of total mothers had a positive correlation with breast milk production.

• 한국가금학회:학술대회논문집
• /
• 한국가금학회 2005년도 제22차 정기총회 및 학술발표회
• /
• pp.82-83
• /
• 2005

Recently, layer industry shows the decrease in the number of farm and increase in rearing scale in both Korea and Japan. Seventy percent of layer farms in Japan feed more than 50,000 birds per each farm but in Korea, only 19.3% of layer farms are feeding more than 30,000 birds which covers 59% of total chicken number. This tendeney will be more accellerated from now on. Brand egg Production in Japan is developed with the involvement of farmers, sailers feed companies and also the marketing structure of brand egg is well organised in between farmers and consumers. However in Korea, the marketing structure of brand egg is not well settled for this reason the egg price is often decided lower much price than regrnlar price by the intermediate dealers. Under this kind of tough situation, Korean layer farmers are stressed to develop new brand products such as functional egg, settle the sales and distribution network with the good cooperation of farmers, and distributers.

• 수산경영론집
• /
• 제46권3호
• /
• pp.129-141
• /
• 2015

Because land based aquaculture is restricted by high investment per rearing volume and control cost, good management planning is important in Land-based aquaculture system case. In this paper master production planning was made to decide the number of rearing, production schedule and efficient allocation of water resources considering biological and economic condition. The purpose of this article is to build the mathematical decision making model that finds the value of decision variable to maximize profit under the constraints. Stocking and harvesting decisions that are made by master production planning are affected by the price system, feed cost, labour cost, power cost and investment cost. To solve the proposed mathematical model, heuristic search algorithm is proposed. The model Input variables are (1) the fish price (2) the fish growth rate (3) critical standing corp (4) labour cost (5) power cost (6) feed coefficient (7) fixed cost. The model outputs are (1) number of rearing fish (2) sales price (3) efficient allocation of water pool.