• Parasites, Hosts and Diseases
• /
• 제47권2호
• /
• pp.93-102
• /
• 2009

Malaria is a major cause of death in tropical and sub-tropical countries, killing each year over 1 million people globally; 90% of fatalities occur in African children. Although effective ways to manage malaria now exist, the number of malaria cases is still increasing, due to several factors. In this emergency situation, prompt and effective diagnostic methods are essential for the management and control of malaria. Traditional methods for diagnosing malaria remain problematic; therefore, new technologies have been developed and introduced to overcome the limitations. This review details the currently available diagnostic methods for malaria.

• Safety and Health at Work
• /
• 제4권1호
• /
• pp.63-70
• /
• 2013

Objectives: This study is planned to assess the trend of occupational injuries in Korea from 2001 to 2010. Methods: Ten years of occupational injuries, from 2001 to 2010, were analyzed in order to investigate the changing profiles according to the various characteristics of injuries; economic sectors, age of the injured, and type of injuries. The changing profile of occupational injuries was investigated by comparison with an index-created relative value based on the number of cases of reference category. Results: The fatalities of construction, forest, agriculture, and service show the increasing trend. The nonfatal occupational injuries of the manufacturing sector were higher than those of other sectors in every year but the fatal occupational injuries of construction workers were higher than those of the manufacturing sector. Occupational injuries occurring due to amputation and those of slip and trip increased. The number of occupational injuries for the worker groups of 24 years old and below decreased and 45 years old and above increased. In comparison to the figure of fall from height, the figures of slip and trip or caught in equipment are higher in every calendar year. Conclusion: This study find out construction, forest, agriculture, and service sectors, aged worker with 45 years old and over can be target population for the strategies of occupational safety.

• 대한인간공학회지
• /
• 제22권1호
• /
• pp.81-94
• /
• 2003

The British railway safety research group has developed a risk assessment model for the railway infrastructure and major railway accidents. The major hazardous factors of the railway infrastructure were identified and classified in the model. The frequency rates of critical top events were predicted by the fault tree analysis method using failure data of the railway system components and ratings of railway maintenance experts, The consequences of critical top events were predicted by the event tree analysis method. They classified the Joss of accident due to railway system into personal. commercial and environmental damages. They also classified 110 hazardous event due to railway system into three categories. train accident. movement accident and non-movement accident. The risk assessment model of the British railway system has been designed to take full account of both the high frequency low consequence type events (events occurring routinely for which there is significant quantity of recorded data) and the low frequency high consequence events (events occurring rarely for which there is little recorded data). The results for each hazardous event were presented in terms of the frequency of occurrence (number of events/year) and the risk (number of equivalent fatalities per year).

• 한국공간정보시스템학회 논문지
• /
• 제8권2호
• /
• pp.1-11
• /
• 2006

This paper addresses a GIS (Geographic Information System) based system in order to reduce the rate of public transportation accidents occurring in Iranian roads network. Over the years, the road accidents are a major issue throughout the world. Today, particular consideration is given to those technologies which can lead to diminish on the number of critical incidents. One of the main factors resulting in accidents and fatalities rates growth is the speed violation of buses in Iranian road network. The conventional speed controlling approach in Iran based on the Tachograph which records vehicle's speed, time, and stoppage in the mechanical processing has many problems. Hence, this research is intended to design and implement a GIS-based system to manage road accident of Bus transportation system using offline tracking system. This was accomplished using a GIS-based technique that encompasses three steps. The first step is developing a GIS-based accident system. The second step includes designing and applying a tracking system inside 90 buses for recording Bus information for speed controlling. Lastly, by using mentioned system in police center, the illegal drivers' punishment would be considered properly. Overall, this system has been successfully applied in this work. Therefore, the police and transportation office are able to control and make policy to diminish the number of accident. It is anticipated that online tracking system through the Web GIS would be utilized In this system in the near future.

• 한국항공운항학회지
• /
• 제31권2호
• /
• pp.18-24
• /
• 2023

According to the results of a survey by Boeing, LOC-I (Loss of Control in Flight) was the highest in the number of deaths by fatality accident category in the past 10 years from 2012 to 2021, and the number of deaths worldwide due to LOC-I accidents was 757. It turned out to be the biggest cause of aircraft fatalities, with a figure close to twice the sum of UNK (Unknown or Undetermined), which is the 2nd place, and CFIT (Controlled Flight Into or Toward Terrain), which is the 3rd place. This study set six scenarios related to spatial disorientation that may occur during sensory-dependent flight targeting student pilots and instructor pilots at domestic designated specialized educational institutions using flight simulation training equipment, and in each scenario, the pilot's. The need for SDRT (Spatial Disorientation Recovery Training) is verified by analyzing the flight experience and recovery ability by qualification, and SDRT is repeatedly performed to verify and present the training cycle and time.

• 한국안전학회지
• /
• 제32권6호
• /
• pp.143-149
• /
• 2017

According to traffic accidents statistics, the number of fatalities, injuries and the rate of increase of traffic accidents have been decreasing over last 5-years. The fatality rate is 1.9 for total accidents but the fatality rate for single vehicle accidents shows a 7.9, which is 4 times greater than the average for all accidents. Single vehicle accidents, usually occur as a vehicle impacts a fixed objects on the roadside as the vehicle runs-off from the road. However, few researches have been conducted considering the accident severity of single vehicle accidents which impact to the fixed objects on the road. The single vehicle accident is directly related to the composition of road cross section, (since it is the required the minimum width of a road for all run-off-the-road vehicles to recover or come to a safe stop). Therefore, this study analyzes the influence of road cross section on traffic accidents to find out the severity of single vehicle accident. To analyze the road elements which are related to the accident severity, the Ordered Probit Model was used. As variables, the element of road cross section such as the radius(m), vertical curve(%), cross sectional grade(%), road width(m). number of climbing lane, median, and curb, were used (as was the 3-years of accidents data). This study found out that cross slope(%), road width(m), and the number of climbing lane are related to the severity of accident. The result of this study could be expected to improve the road safety and to be used as the base data for further road safety research.

• Environmental Analysis Health and Toxicology
• /
• 제25권4호
• /
• pp.263-271
• /
• 2010

Objectives : The records of 447 pesticide poisoning deaths from the National Forensic Service (NFS) headquarters located in Seoul of Korea from 2005 to 2009 were retrospectively reviewed. Methods : The data of each case were analyzed by using the SPSS program. Results : The mean age was $57.8{\pm}14.8$ years and the range was 16-92 years. The numbers of deaths of males and females were 301 and 134, respectively. The largest number of cases occurred in people aged 50-59 years (n=92, 20.6%) followed by the age groups 40-49 years (n=91, 20.4%), 60-69 years (n=88, 19.7%), and 70-79 years (n=75, 16.8%). The total number of deaths among other age groups (10-19, 20-29, 30-39, 80-89, and 90-99 years) was 73, representing only 16.3%. Of all pesticide poisoning deaths, 96.2% were due to suicide, and 28.4% of the total number who died received medical treatment. The mostfrequent site of ingestion was the person's own residence (n=279, 62.4%). The most common classes of pesticide were bipyridylium herbicide (paraquat, 31.1%), organophosphate insecticide (21.7%), and carbamate insecticide (15.4%). The major pesticides having a high proportion of fatalities were paraquat (31.1%), methomyl (11.4%), glyphosate (9.1%), dichlorvos (5.6%), phosphamidon (4.6%), and methidathion (4.0%). Conclusions : This study showed that poisoning deaths due to pesticides are one of the major public health problems in Korea. Enforcement of regulations and safety education to prevent pesticide poisoning should be carried out by the government.

• 대한교통학회지
• /
• 제17권1호
• /
• pp.187-196
• /
• 1999

본 연구의 목적은 국내에 설치가 확대되고 있는 자동과속단속시스템의 교통안전 개선 메커니즘을 밝히자는 것이다. 이를 위해서 첫째, 시스템 운영이 교통류 특성에 미치는 영향을 분석하고, 둘째, 교통류 특성 변수와 안전도와의 모형을 설정하였다. 1997년부터 운영된 32대 시스템의 1년간 운영효과를 분석한 결과 교통사고 28%, 사망자수 60%가 감소한 것으로 나타났다. 시스템 설치지점의 교통류 특성변화를 분석한 결과 평균속도, 속도분산, 짧은 차두시간 비율 등의 변수가 현저하게 감소하였다. 교통사고빈도와 교통류 특성 변수간의 회귀모형을 설정한 결과 평균속도, 속도분산, 과속교통량이 유의한 설명변수로 나타났다. 따라서 자동과속단속시스템의 교통안전도의 개선 메커니즘은 (1)단속시스템 도입 $\longrightarrow$(2)교통류 특성 개선 $\longrightarrow$ (3)안전도개선이란 과정에 의하여 달성된다는 가설을 입증하였다. 본 연구는 ITS의 도입이 교통안전에 미치는 효과를 계량적으로 평가할 수 있는 토대가 될 것이며 동적 교통안전(operational traffic safety)이란 측면에서 교통안전 연구에 대한 새로운 시각을 제공하는데 의의가 있다고 하겠다.

• 한국건축시공학회지
• /
• 제23권1호
• /
• pp.81-92
• /
• 2023

According to the 2020 industrial accident reports of the Ministry of Employment and Labor, the number of fatal accidents in the construction industry over the past 5 years has been higher than in other industries. Of these more than 50% of fatal accidents are initially caused by fall accidents. The central government is intensively managing falling/jamming protection device and the use of personal protective equipment to eradicate the inappropriate factors disrupting safety at construction sites. In addition, although efforts have been made to prevent safety accidents with the proposal of the Special Act on Construction Safety, fatalities on construction sites are constantly occurring. Therefore, this study developed a model that automatically detects the wearing state of the worker's safety helmet and belt using computer vision technology. In considerations of conditions occurring at construction sites, we suggest an optimization method, which has been verified in terms of the accuracy and operation speed of the proposed model. As a result, it is possible to improve the efficiency of inspection and patrol by construction site managers, which is expected to contribute to reinforcing competency of safety management.

• 대한안전경영과학회지
• /
• 제18권1호
• /
• pp.75-82
• /
• 2016

According to the statistics, occupational fatal injuries by the fork lifts were about 30 per year in whole industrial. Fork lifts are widely used in various parts of industries to improve the efficiency of the work. In this study, the current regulations to be adequate in industrial site have to be renew in order to prevent the fatal injuries by the fork lifts. Fatal injury analysis were conducted with several accident cases by the fork lifts. For each accident, the causes of the injuries were examined and proper safety measures were proposed. In this study, the fork lift showed a high fatality rate in industrial accidents and no detailed cause analysis of fatal accidents was conducted in terms of unsafe acts or conditions. First, fork lifts were the highest of the machines caused the accidents. In order to prevent fatal injuries by the fork lifts, the tarket was manufacturing industry. Second, the order of the cause of cognitive engineering agenda in the manufacture industrial was visibility, responsibility and affordance, and revision of acts was proposed. Third, there was not a lots of different points of human error between occurrence types and business sizes. Forth, number of fatalities by the attacker was more than by the inducer.