• Steel and Composite Structures
• /
• v.21 no.1
• /
• pp.123-136
• /
• 2016

This work focuses on the behavior of the static analysis of functionally graded plates materials (FGMs) with porosities that may possibly occur inside the functionally graded materials (FGMs) during their fabrication. For this purpose a new refined plate theory is used in this work, it contains only four unknowns, unlike five unknowns for other theories. This new model meets the nullity of the transverse shear stress at the upper and lower surfaces of the plate. The parabolic distribution of transverse shear stresses along the thickness of the plate is taken into account in this analysis; the material properties of the FGM plate vary a power law distribution in terms of volume fraction of the constituents. The rule of mixture is modified to describe and approximate material properties of the FG plates with porosity phases. The validity of this theory is studied by comparing some of the present results with other higher-order theories reported in the literature, the influence of material parameter, the volume fraction of porosity and the thickness ratio on the behavior mechanical P-FGM plate are represented by numerical examples.

• Journal of ILASS-Korea
• /
• v.11 no.4
• /
• pp.228-233
• /
• 2006

There are two types of electric controlled fuel injection system in the gasoline engines of common vehicles. One is fuel return system and the other is fuel returnless system according to the methods of controlling injection pressures. It is important to understand the characteristics of these system in loaming and studying of engine, but it is very difficult without a special equipment in reality. The purpose of this paper is to develop the emulation system that can be compensated with the amount of injection fuel according to various driving conditions, battery voltage, cooling water temperature, and engine speed, may be appeared in real driving, and especially can analyze the difference between the electric signal controlling the amount of injection fuel and its result, and nullity injection duration. With the developed system, we can conveniently set various and completed driving condition and so can acquire the useful information such as non-uniformity rate and mass of injection fuel using waveform analysis and measurement modules. It must be a very useful and sophisticated system to instruct and learn the features and operating states of injection system, and to study f3r improving the performance of it.

• Steel and Composite Structures
• /
• v.39 no.2
• /
• pp.149-158
• /
• 2021

In this research paper, the free vibrational response of laminated composite plates is investigated using a non-polynomial refined shear deformation theory (NP-RSDT). The most interesting feature of this theory is the parabolic distribution of transverse shear deformations while ensuring the conditions of nullity of shear stresses at the free surfaces of the plate without requiring the Shear correction factor "Ks". A fourth-nodded isoparametric element with four degrees of freedom per node is employed for laminated composite plates. The numerical analysis of simply supported square anti-symmetric cross-ply and angle-ply laminated plate is carried out using a special discretization based on four-node finite element method which four degrees of freedom per node. Several numerical results are presented to show the effect of the coupling parameters of the plate such as the modulus ratios, the thickness ratio and the plate layers number on adimensional eigen frequencies. All numerical results presented using the current finite element method (FEM) is presented in 3D curve form.

• ETRI Journal
• /
• v.41 no.2
• /
• pp.235-241
• /
• 2019

In this paper, we propose a rank-weighted reconstruction feature to improve the robustness of a feed-forward deep neural network (FFDNN)-based acoustic model. In the FFDNN-based acoustic model, an input feature is constructed by vectorizing a submatrix that is created by slicing the feature vectors of frames within a context window. In this type of feature construction, the appropriate context window size is important because it determines the amount of trivial or discriminative information, such as redundancy, or temporal context of the input features. However, we ascertained whether a single parameter is sufficiently able to control the quantity of information. Therefore, we investigated the input feature construction from the perspectives of rank and nullity, and proposed a rank-weighted reconstruction feature herein, that allows for the retention of speech information components and the reduction in trivial components. The proposed method was evaluated in the TIMIT phone recognition and Wall Street Journal (WSJ) domains. The proposed method reduced the phone error rate of the TIMIT domain from 18.4% to 18.0%, and the word error rate of the WSJ domain from 4.70% to 4.43%.

• Structural Engineering and Mechanics
• /
• v.65 no.5
• /
• pp.621-631
• /
• 2018

In this paper, an exact analytical solution is developed for the analysis of the post-buckling non-linear response of simply supported deformable symmetric composite beams. For this, a new theory of higher order shear deformation is used for the analysis of composite beams in post-buckling. Unlike any other shear deformation beam theories, the number of functions unknown in the present theory is only two as the Euler-Bernoulli beam theory, while three unknowns are needed in the case of the other beam theories. The theory presents a parabolic distribution of transverse shear stresses, which satisfies the nullity conditions on both sides of the beam without a shear correction factor. The shear effect has a significant contribution to buckling and post-buckling behaviour. The results of this analysis show that classical and first-order theories underestimate the amplitude of the buckling whereas all the theories considered in this study give results very close to the static response of post-buckling. The numerical results obtained with the novel theory are not only much more accurate than those obtained using the Euler-Bernoulli theory but are almost comparable to those obtained using higher order theories, Accuracy and effectiveness of the current theory.

• Structural Engineering and Mechanics
• /
• v.85 no.5
• /
• pp.593-605
• /
• 2023

This work presents a comparison between analytical and finite element analysis for bending of porous sandwich functionally graded material (FGM) plates. The plate is rectangular and simply supported under static sinusoidal loading. Material properties of FGM are assumed to vary continuously across the face sheets thickness according to a power-law function in terms of the volume fractions of the constituents while the core is homogeneous. Four types of porosity are considered. A refined higher-order shear with normal deformation theory is used. The number of unknowns in this theory is five, as against six or more in other shear and normal deformation theories. This theory assumes the nonlinear variation of transverse shear stresses and satisfies its nullity in the top and bottom surfaces of the plate without the use of a shear correction factor. The governing equations of equilibrium are derived from the virtual work principle. The Navier approach is used to solve equilibrium equations. The constitutive law of the porous FGM sandwich plate is implemented for a 3D finite element through a subroutine in FORTRAN (UMAT) in Abaqus software. Results show good agreement between the finite element model and the analytical method for some results, but the analytical method keeps giving symmetric results even with the thickness stretching effect and load applied to the top surface of the sandwich.

• Advances in concrete construction
• /
• v.14 no.3
• /
• pp.169-183
• /
• 2022

In this article, vibrational behavior and wave propagation characteristics in (FG) functionally graded plates resting on Kerr foundation with three parameters is studied using a 2D dimensional (HSDT) higher shear deformation theory. The new 2D higher shear deformation theory has only four variables in field's displacement, which means has few numbers of unknowns compared with others theories. The shape function used in this theory satisfies the nullity conditions of the shear stresses on the two surfaces of the FG plate without using shear correction factors. The FG plates are considered to rest on the Kerr layer, which is interconnected with a Pasternak-Kerr shear layer. The FG plate is materially inhomogeneous. The material properties are supposed to vary smoothly according to the thickness of the plate by a Voigt's power mixing law of the volume fraction. The equations of motion due to the dynamics of the plate resting on a three-parameter foundation are derived using the principle of minimization of energies; which are then solved analytically by the Navier technique to find the vibratory characteristics of a simply supported plate, and the wave propagation results are derived by using the dispersion relations. Perceivable numerical results are fulfilled to evaluate the vibratory and the wave propagation characteristics in functionally graded plates and some parameters such wave number, thickness ratio, power index and foundation parameters are discussed in detail.

• Journal of Arbitration Studies
• /
• v.27 no.1
• /
• pp.59-84
• /
• 2017

The effects of an arbitration agreement depend on the legislative policy of the nation where arbitral awards are made and where awards are worked out in the private procedures. According to the main body of Article 35 of the Korean Arbitration Act, arbitral awards have the same effects on the parties as the final and conclusive judgment of the court. This is only possible if the awards are formed by satisfying all the legal requirements, have gone into effect, and have become final and conclusive. It is for the legal stability and the effectiveness of the settlement of disputes that the Act grants arbitral awards. While investigating the effects of an arbitral award, the character of the arbitration in which the party's autonomy applies should be considered, along with the substance of the disputes which parties intend to resolve by an arbitration agreement. The proviso of Article 35, which was added in the 2016 Act, says that the main body of the Article shall not apply if recognition or enforcement of arbitral awards is refused under Article 38. Two stances have been proposed in interpreting the proviso. One of them is that there are grounds for refusing the recognition and enforcement of the awards. The other one is that the ruling of the dismissal of a request for enforcement has been final and conclusive. According to the former, it is really unexplained as to its relations with the action for setting aside arbitral awards to court and the distinction between nullity and revocation, and so on. Therefore, its meaning must be comprehended on the basis of the latter so that the current Act system with revocation litigation could be kept. The procedures of setting aside, recognizing, and enforcing arbitral awards are independent of one another under the Act. It is apprehended that the duplicate regulations may lead to the concurrence or contradiction of a court's judgment and ruling. Thus, we need to take proper measures against the negative sides by interfacing and conciliating these proceedings.

• The Korean Journal of Air & Space Law and Policy
• /
• v.35 no.2
• /
• pp.113-136
• /
• 2020

Worldwide, so-called 'over-booking' of Air Carriers is established in practice. Although not invalid, despite their current contracts, passengers can be refused boarding, which can hinder travel planning. The Korean Supreme Court ruled that an airline carrier who refused to board a passenger due to over-booking was liable for compensation under the "Nonperformance of obligation". But what the court should be thinking about is when the benefit(transport) have been disabled. Thereforeit may be considered that the impossibility of benefit (Transport) due to the rejection of boarding caused by 'Over-booking' may be not the 'subsequent impossibility', but not the 'initialimpossibility '. The legal relationship due to initial impossibility is nullity (imposibilium nulla est obligation). When benefits are initial impossibile, our civil code recognizes liability for damages in accordance with the law of "Culpa in Contrahendo", not "nonperformance of obligation". On this reason, the conclusion that the consumer will be compensated for the loss of boarding due to overbooking by the Air Carrier is the same, but there is a need to review the legal basis for the responsibility from the other side. However, it doesn't matter whether it is non-performance or Culpa in Contrahendo. Rather, the recognition of this compensation is likely to cause confusion due to unstable contractual relationships between both parties. Even for practices permitted by Air Carriers, modifications to current customary overbooking that consumers must accept unconditionally are necessary. At the same time, if Air Carriers continue to be held liable for non-performance of obligations due to overselling tickets, it can be fatal to the airline business environment that requires overbooking for stable profit margins. Therefore, it would be an appropriate measure for both Air Carriers and passengers if the Air Carrier were to be given a clearer obligation to explain (to the consumer) and, at the same time, if the explanation obligation is fulfilled, the Air Carrier would no longer be forced to take responsibility for overbooking.