• Journal of the Korean Data and Information Science Society
• /
• 제16권4호
• /
• pp.1053-1066
• /
• 2005

In this paper we consider the problem of identifying and testing outliers in linear regression. First we consider the use of the so-called scale ratio tests for testing the null hypothesis of no outliers. This test is based on the ratio of two residual scale estimates. We show the asymptotic distribution of the test statistics and investigate its properties. Next we consider the problem of identifying the outliers. A forward sequential procedure using the suggested test is proposed. The new method is compared with classical procedure in the real data example. Unlike other forward procedures, the present one is unaffected by masking and swamping effects because the test statistic is based on robust scale estimate.

• Communications for Statistical Applications and Methods
• /
• 제2권1호
• /
• pp.122-136
• /
• 1995

The objective of this research is to investigate the problem of goodness-of-fit testing based on nonparametric density estimation with a data-driven smoothing parameter. The small and large sample properties of a new test statistic $\hat{\lambda_a}$ is investigated. The test statistic $\hat{\lambda_a}$ is itself a smoothing parameter which is selected to minimize an estimated MISE for a truncated series estimator of the comparison density function. Therefore, this test statistic leads immediately to a point estimate of the density function th the event that $H_0$ is rejected. The limiting distribution of $\hat{\lambda_a}$ is obtained under the null hypothesis. It is also shown that this test is consistent against fixed alternatives.

• 품질경영학회지
• /
• 제15권2호
• /
• pp.50-54
• /
• 1987

A distribution-free rank test for parallelism of regression lines against ordered alternatives is considered. The proposed test statistic is based on the Kepner-Robinson's transformation. The null distribution of the proposed statistic is the same as that of the Wilcoxon signed rank statistic. But, the proposed procedure can be applied only to four or fewer regression lines. The results of a small-sample Monte Carlo study show that the proposed test is comparable with the parametric test in heavy tailed distributions.

• 품질경영학회지
• /
• 제43권3호
• /
• pp.289-298
• /
• 2015

Purpose: This study examined the problem of crack formation in the fire control system(FCS) of the K11 objective individual combat weapon(OCIW), using design of experiment analysis. Three hypothesis were considered. The first hypothesis is that bolted joint has an effect on impulse caused by firing the weapon and the second hypothesis is that a short time interval of shooting has an effect on impulse and lastly, the third hypothesis is that a positive correlation has between the bolted joint of the FCS and the impulse. Methods: The relationship between the bolted joint and the impulse cause by firing the weapon were examined experimentally. The first and second hypothesis was tested using correlation analysis and the t-test. Results: Using ANOVA, the first null hypothesis was rejected and the alternative hypothesis was accepted. ANONA confirmed the second null hypothesis. Correlation analysis dismissed the last null hypothesis. A positive correlation between the bolted joint and the impulse caused by shooting the weapon was verified. Conclusion: The bolted joint of the K11 FCS and the barrel of the K11 affect the impulse caused by firing the weapon. A positive correlation was established between the bolted joint of the FCS and the impulse on firing the K11 OICW.

• 대한치과교정학회지
• /
• 제43권5호
• /
• pp.242-247
• /
• 2013

Objective: To test the null hypothesis that no difference exists between the effects of at-home bleaching and in-office bleaching on shear bond strength (SBS) with bracket bonding at 4 different time intervals after dental bleaching. Methods: Ninety extracted human premolars were randomly divided into 9 groups (n = 10) according to the bleaching methods used (at-home bleaching and in-office bleaching) and the storage time in artificial saliva (30 min, 1 day, 2 weeks, and 3 weeks before bonding). The control group was stored in artificial saliva for 7 days. Brackets were bonded with the Transbond XT adhesive system, and SBS testing was performed. The adhesive remnant index (ARI) was used to assess the amount of resin remaining on the enamel surfaces after debonding. The SBS data were analyzed by analysis of variance (ANOVA) and the Tukey test. For the ARI, the Kruskal-Wallis test was performed. Significance for all statistical tests was predetermined to be p < 0.05. Results: The SBS of the unbleached group was significantly higher (p < 0.05) than that of the bleached groups (except for the group bonded 30 min after at-home bleaching). Conclusions: The null hypothesis was not totally rejected. All bleaching groups tested had decreased SBS of the brackets to the enamel, except for the group bonded 30 min after at-home bleaching. The SBS returned to values close to those of the unbleached enamel within 3 weeks following bleaching.

• 대한치과교정학회지
• /
• 제45권2호
• /
• pp.89-94
• /
• 2015

Objective: To test the null hypothesis that SmartClip self-ligating brackets are more effective than conventional brackets for initial mandibular alignment and identify influential factors. Methods: Fifty patients were randomly allocated to two equal treatment groups by using an online randomization program: self-ligating group (SmartClip brackets) and conventional group (Gemini brackets). The archwire sequence was standardized. Changes in anterior irregularity index, intercanine width, and intermolar width were assessed on plaster models at 8th and 16th weeks. Changes in incisor position and inclination were assessed on lateral cephalometric radiographs at 16 weeks. Intragroup and intergroup comparisons were performed with paired t-test and Student's t-test, respectively. Multiple linear regression was performed to identify variables affecting improvement in anterior ambiguity. Results: Data of 46 patients were analyzed; those missing an appointment (n = 2) or showing bracket breakage (n = 2) were excluded. Incisor inclination (p < 0.05), intercanine width (p < 0.05), and intermolar width (p > 0.05) increased at 8 and 16 weeks in both the groups; no significant intergroup differences were noted (p > 0.05). Initial anterior irregularity index and intercanine width change were significantly associated with improvement in anterior irregularity (p < 0.001). Conclusions: The null hypothesis was rejected. Bracket type has little effect on improvement in anterior ambiguity during initial mandibular alignment.

• 한국가정과학회지
• /
• 제6권1호
• /
• pp.57-66
• /
• 2003

The purpose of this study was to investigate the housewives' characteristics of household work management. to classify the household work manager styles and to investigate the relationship between the household work manager styles and the family life satisfaction. The data used for statistical analysis is 352 housewives. The data were analyzed by using SPSSWIN Program, $x^2$-test, one-way ANOVA With Duncan's Multiple Range test and t-test were utilized to test null hypotheses. The major findings of this study were as follows : Human centered household work management was more popular than task centered. Family life satisfaction was significantly different depending on the household work manager style. The idel style was concluded as the most desirable manager style.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.967-973
• /
• 2004

Electro-pneumatic servo valve is an electro-mechanical device which converts electric signals into a proper pneumatic flow rate or pressure. In order to improve the overall performance of pneumatic servo systems, electro-pneumatic servo valves are required, which have fast dynamic characteristics, no air leakage at a null point, and can be fabricated at a low-cost. The first objective of this research is to design and to fabricate a new electro-pneumatic servo valve which satisfies the above-mentioned requirements. In order to design the mechanism of the servo valve optimally, the flow inside the valve depending upon the position of spool was analyzed variously, and on the basis of such analysis results, the valve mechanism, which was formed by combination of the spool and the sleeve, was designed and manufactured. And a tester for conducting an overall performance test was designed and manufactured, and as a result of conducting the flow rate test, the pressure test and the frequency test on the developed pneumatic servo valve.

• 품질경영학회지
• /
• 제31권4호
• /
• pp.194-202
• /
• 2003

In this paper, we propose goodness of fit test statistics for exponentiality in accelerated life tests data based on Kullback­Leibler information functions. This acceleration model is assumed to be a tampered random variable model. The procedure is applicable when the exponential parameter using the data from accelerated life tests is or is not specified under null hypothesis. And we compare the power of the proposed test statistics with Kolmogorov­Smirnov, Cramer von Mises and Anderson­Darling statistics in the small sample.

• 응용통계연구
• /
• 제32권6호
• /
• pp.879-887
• /
• 2019

본 연구에서는 이표본 구간 자료의 확률적 순서 검정 절차를 제안한다. 제안하는 검정 통계량은 U-통계량에 해당하며 본 연구에서는 이에 대한 점근적 분포를 귀무 가설 하에서 유도하였다. 실제 자료와 모의 실험을 통해 새로 제안한 방법의 성능을 단측 이변량 Kolmogorov-Smirnov 검정법과 비교한다.