• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2013년도 춘계학술대회
• /
• pp.597-598
• /
• 2013

국가산업시설인 통신망 및 전력시설과 원자력 및 화력발전소, 중대형 건물, 문화재, 금속 및 철강공장, 화학공장, 정유공장 등 대형공장의 화재위험 지역에서 많은 화재 및 범죄사고가 발생하여 국가적으로 지대한 손실을 초래하고 있다. 이러한 사건과 사고를 근본적으로 방지하기 위해서는 객체의 온도와 움직임을 고수준으로 감지 할 수 있는 화재감지 시스템의 개발이 필수적이다. 본 논문에서는 이러한 문제점을 해결하기 위하여 적외선 열영상 및 CCD 카메라 기반 화재감지 및 연기감지가 가능한 화재감지 시스템을 설계하였다.

• 한국유체기계학회 논문집
• /
• 제10권5호
• /
• pp.20-26
• /
• 2007

Some gate valves are susceptible to pressure locking and thermal binding which prevent the safety function. The safety related gate valves susceptible to pressure locking and thermal binding shall be identified and taken preventive actions to ensure the safety function. The identification of the gate valves susceptible to pressure locking and thermal binding needs the evaluation of system design, valve and piping arrangement, test requirements, and operating conditions. Application of preventive methods should consider the system safety function, applicability, effectiveness, interface with system design, and cost. The selection procedure of valves susceptible to pressure locking and thermal binding can be effectively used in industry including nuclear power plants. In order to prevent the pressure locking, the hole can be drilled through the one disc of upstream side or down stream and the external equalizing line can be installed from bonnet to downstream or upstream. The double disc parallel seat valve type can be used instead of flexible wedge gate valve to prevent the thermal binding. The identification of gate valves susceptible to pressure locking and thermal binding, and preventive actions will meet the regulatory requirements and enhance the availability and safety of plants.

• 대한인간공학회지
• /
• 제31권1호
• /
• pp.125-130
• /
• 2012

Objective: This paper discusses how service design is related to two well-known disciplines, interaction design and cognitive systems engineering, which are applied to the design of software, websites and mobile phones, and the design of control room of nuclear power plants and cockpit control, respectively. Background: Service design has been spotlighted recently due to its promisingness to service industry. Successful cases of service design are widely shared among designers. Service design, however, is treated as practice rather than a discipline. Method: It was discussed that it is important to consider the interaction between customers and services as in interaction design, and some domains are complex enough and have functional limitation as in cognitive systems engineering. Results: Models and design tools of the disciplines are introduced and applied to service design practices. Conclusion: It was concluded that service design has the characteristics of both interaction design and cognitive systems engineering.

• 한국시스템다이내믹스연구
• /
• 제15권2호
• /
• pp.27-50
• /
• 2014

Korea government established the energy technology development plan (2011-2020) and declared to be a leader of the green energy technologies. The plan aims for 10% market share in the green energy industry, 12% energy efficiency improvement, and 15% greenhouse gas reduction. In order to achieve these goals, the government has tried to calculate the whole scale of national energy R&D investment, annual budget and specific expenditures for new technologies by computer simulation. The simulation modules include the R&D investment model, GDP model, energy consumption and $CO_2$ emission model by System Dynamics. Based on these simulation modules, I tested various scenarios for effectiveness of energy R&D investments until 2020. The results show that Korea should increase national energy R&D investment to 2.3 billion U.S. dollars, and switch the investment from electricity and nuclear power to the renewable energy.

• 한국정밀공학회지
• /
• 제19권2호
• /
• pp.65-71
• /
• 2002

Turbine blade is subject to cyclic bending force by steam pressure. Stress analysis by fractography is already established technology as means far seeking cause of fracture and has been widely employed. In the X-ray frctography, plastic deformation and residual stress near the fracture surface can be determined and information of internal structure of material can be obtained. Therefore, to find a fracture mechanism of torsion-mounted blade in nuclear power plant, based on the information from the fracture surface obtained by fatigue test, the correlation of X-ray parameter and fracture mechanics parameter was determined and then the stress intensity factor to actual broken turbine blade was predicted.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.135-138
• /
• 1995

Recently, most of advanced materials used a wide industry field commonly have the characteristics of difficulty-to-cut materials. The cutting of difficulty-ro-cut materials have a variable optimum cutting conditions and methods according to materials. Above all,it is important of understanding to machinability of each materials. Especially, superalloy with Elevated Temperature Strength like as Incone1718 was used in nuclear power equipment and jet engine parts. This research shows a machining characteristics of Heat-Resistant alloy for high efficiency cutting through cutting force,tool wear and cutting temperature in SUS304 and Incone1718.

• 한국생산제조학회지
• /
• 제22권2호
• /
• pp.337-341
• /
• 2013

In this study, fatigue crack propagation in composite material under fatigue is investigated by simulation result. When another material on the specimen exists vertically to the crack line, the phenomena that crack may go straight or propagate along the boundary face according to the elastic modulus ratio of another material to matrix are investigated with compact tension specimen by compliance method. Crack propagation direction is evaluated by compliance method. By arranging this study result systematically about the crack propagation behavior due to the stiffness of inhomogeneous material, high-tech material (automobile, aircraft and steel industry) can be improved. The estimation of safety design and life (construction & nuclear power station, etc.) will be of great value industrially.

• 산업경영시스템학회지
• /
• 제2권2호
• /
• pp.1-4
• /
• 1979

In order to cope with the violent environment of surrounding enterprises, development of new products, advance to other industry field, unification or abolition of factories and rationlization of labor are needed. But production process being made quality and using process after shipment are the things that we have to think about, first of all and to practice always. Insurance problem of reliability, that is, the positive quality maintenance that has being presented many debate issues recently, will be studied. The accident of nuclear power-plant in America, in connection with reliability maintenance and human engineering, will be analyzed. But as its accident details is not announced, in this study, it is a sort of method of methodology to be studied this paper rather than studying the fact of the accident. Therefore this study will be done as follows, For reliability study. 1. Investigation of problems. 2. Quality maintenance activity and reliability maintenance activity 3. Reliability acquisition in production process, 4. Reliability maintenance after shipment. 5. Conclusion. In addition to stating above, it is sure that liberalization of trade, interchange between nations and strengthening of international competition ability, etc. need high quality. But possibility that quality maintenance or reliability aquisition needs understanding and cooperation of consumer, will be stated.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.110-114
• /
• 2008

Determination of weld-induced residual stress has been an important issue in nuclear power industry because several failures were reported in dissimilar metal weld parts due to primary water stress corrosion cracking. In this context, a couple of remarkable round robin analyses were conducted to quantify the welding simulation variables and to establish optimized numerical analysis process. The purpose of the present research is to introduce welding simulation results for a safety and relief nozzle, which has a dissimilar metal weld part as well as a similar metal weld part. First, finite element analyses are carried out to calculate residual stresses at the inside of nozzle considering only dissimilar metal welding. Subsequently, residual stresses taking into account both the dissimilar and similar metal welding are computed. The similar metal weld effect is evaluated by compa

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2008년도 추계종합학술대회 B
• /
• pp.520-523
• /
• 2008

최근까지 전자정보산업의 발달로 자동 초음파검사 하드웨어는 갈수록 경량화 되어 가고 있고, 소프트웨어는 다양한 최신 이미지 처리 기법이 적용되어 정확한 결함 위치 및 크기 측정이 가능하도록 연구되어지고 있다. 본 논문에서는 원전 배관 자동 검사에 최적화된 시스템을 구성하기 위해 배관자동 초음파 검사 시스템을 제안하고, 시스템 설계를 위해 소프트웨어의 데이터 흐름과 일반적인 구성에 대해서 기술한다.