• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.2
• /
• pp.113-120
• /
• 2002

This paper describes characteristics of transient voltage waveforms caused by human electrostatic discharges(ESDs). For purpose of achieving the statistics on the meaningful amplitude and initial slope for transient ESD voltage waveforms, transient voltages due to human ESDs in various conditions were observed. A voltage measuring system with a wide bandwidth from DC to 400[MHz] was employed. ESD voltage waveforms are approximately the same as ESD current waveforms. Also the simulated results, which are calculated by the reposed equivalent circuit, are closely similar to the measured voltage waveforms. ESD voltage waveforms are strongly dependent on the approach speed and material of intruder, a fast approach causes ESD voltage waveform with a steep rise time than for a slow approach. The voltage waveforms from dialect finger ESDs have a relatively long rise time of 10∼30[ns], but their peaks are low. On the other side ESD voltage waveforms causer by screwdriver with insulating handle have a steep slope with a very short, less than 1[ns] rise time, but their initial spikes are extremely high The obtained results in this work would be applied to solve ESD problems for low voltage and small current electronic devices.

• Journal of Advanced Navigation Technology
• /
• v.14 no.4
• /
• pp.495-503
• /
• 2010

The clustering is an important mechanism thai provides information for mobile nodes efficiently and improves the processing capacity for routing and the allocation of bandwidth. This paper proposes a clustering scheme based on the fuzzy relevance degree to solve problems such as node distribution found in the dynamic property due to mobility and flat structure and to enhance the routing performance. The proposed scheme uses the fuzzy relevance degree, ${\alpha}$, to select the cluster head for clustering in FSV (Fuzzy State Viewing) structure. The fuzzy relevance ${\alpha}$ plays the role in CH selection that processes the clustering in FSV. The proposed clustering scheme is used to solve problems found in existing 1-hop and 2-hop clustering schemes. NS-2 simulator is used to verify the performance of the proposed scheme by simulation. In the simulation the proposed scheme is compared with schemes such as Lowest-ID, MOBIC, and SCA. The simulation result showed that the proposed scheme has better performance than the other existing compared schemes.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.13 no.2
• /
• pp.42-53
• /
• 2009

Gas turbine engine simulation program has been developed. In compressor and turbine, 2-D NS implicit code is used with k-$\omega$ SST turbulent model. In combustor, 0-D lumped method chemical equilibrium code is adopted under the limitations, the products are only 10 species of molecular and air-fuel is perfectly mixed state with 100% combustion efficiency at constant pressure. Fluid properties are shared on interfaces between engine components. The outlet conditions of compressor have been used as the inlet condition of combustor. The inlet condition of turbine comes from the compressor The back pressure in compressor outlet is transferred by the inlet pressure of turbine. Unsteady phenomena at rotor-stator in compressor and turbine is covered by mixing-plane method. The state of engine can be determined only by given inlet condition of compressor, outlet condition of turbine, equivalence ratio and rotating speed.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.12
• /
• pp.71-78
• /
• 2005

In this paper, we propose a transceiver for noncoherent OOK(On-Off Keying) Ultra Wide Band system based on magnitude detection. The proposed transceiver are designed using 0.18 micron CMOS technology and verified by simulation using SPICE and measurement. The proposed transceiver consist of parallelizer, Analog-to-Digital converter, clock generator, PLL and impulse generator. The time resolution of 1ns is obtained with 125MHz system clocks and 8x parallelization is carried out. The synchronized eight outputs with 2-bit resolution are delivered to the baseband. Impulse generator produces 1ns width pulse using digital CMOS gates. The simulation results and measurement show the feasibility of the proposed transceiver for UWB communication system.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.28B no.7
• /
• pp.520-534
• /
• 1991

This paper describes the design of an ALU and a shifter for RISC. The RISC datapath is designed to have a 4-stage pipeline and a 20 MHz operating frequency. The ALU makes use of the 32-bit BLC adder which has the characteristics of high speed ane regular structuer and executes the arithmetic instructions-addition and subtraction- and the logical instructions-AND, OR, and XOR. Additionally, multiplication is possible by iterative executions of step instructions to perform shift and add operations. The shifter is implemented by using the modified of funnel shifter. The shifter is able to perform the arithmetic andlogical shift instructions without maskiog. Moreover, it carries out data align operation which conforms to big endian byte address. The logical operation of the desinged ALU and the shifter were simulated using YSLOG and VLSIsim. SPICE simulation results using 1.2um double metal process parameters show that the ALU and shifter have a delay time of 15.9NS and 9.9NS, respectively. Therefore, the ALU and the shifter operates correctly above 20[ MHz ] click ferquency and are composed of about 7K and 15K teansistors, respectively.

• Journal of the Semiconductor & Display Technology
• /
• v.20 no.2
• /
• pp.67-72
• /
• 2021

MANET(Mobile Ad Hoc Network) is the structure in which a source node communicates with a destination node by establishing a route with neighbor nodes without using the existing wired or wireless network. Therefore, the routing protocol for MANET must correspond well to changes in the channel state of moving nodes, and should have simple operation, high reliability, and no routing loop. In this paper, the simulation was perform by using a traffic model with on/off two states provided by the NS-3 network simulator. Also, the duration of the ON state and the duration of the OFF state used the traffic where inter arrival time of data is irregular by generating random values with constant, exponential distribution, and Pareto distribution. The performance of the DSDV, OLSR, and AODV protocols was compare and analyzed using the generated traffic model.

• Journal of Korea Multimedia Society
• /
• v.12 no.8
• /
• pp.1109-1119
• /
• 2009

WLAN(Wireless Local Area Network) standard is currently developing with increased wireless internet demand. Though existing IEEE 802.11e demonstrates that data rates exceed 54Mbps with assuring QoS(Quality of Service), wireless internet users can't be satisfied with real communication system. After IEEE 802.11e system, Study trends of IEEE 802.11n show two aspects, enhanced system throughput using aggregation among packets in MAC (Medium Access Control) layer, and better data rates adapting MIMO(Multiple-Input Multiple-Output) in PHY(Physical) layer. But, no one demonstrates IEEE 802.11n system performance results considering MAC and PHY connection. Therefore, this paper adapts MIMO in PHY layer for IEEE 802.11n system based on A-MPDU(Aggregation-MAC Protocol Data Unit) method in MAC layer considering MAC and PHY connection. SVD(Singular Value Decomposition) method with WLAN MIMO TGn Channel is used to analyze MIMO. Consequently, Simulation results show enhanced throughput and data rates compared to existing system. Also, We use Ns-2(Network Simulator-2) considering MAC and PHY connection for reality.

• Journal of Ocean Engineering and Technology
• /
• v.17 no.6
• /
• pp.7-15
• /
• 2003

A Digital Wave Tank simulation technique, based on a finite-difference method and a modified marker-and-cell (MAC) algorithm, is applied in order to investigate the characteristics of nonlinear Tsunami propagations and their interactions with a 2D sloping beach, Ohkushiri Island, and to predict maximum wove run-up around the island. The Navier-Stokes (NS) and continuity equation are governed in the computational domain, and the boundary values are updated at each time step, by a finite-difference time-marching scheme in the frame of the rectangular coordinate system. The fully nonlinear, kinematic, free-surface condition is satisfied by the modified marker-density function technique. The near shore Tsunami is assumed to be a solitary wave, and is generated from the numerical wave-maker in the developed Digital Wave Tank. The simulation results are compared with the experiments and other numerical methods, based on the shallow-water wave theory.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.05a
• /
• pp.231-239
• /
• 2003

A Digital Wave Tank simulation technique based on a finite-difference method and a modified marker-and-cell (MAC) algorithm is applied to investigate the characteristics of nonlinear Tsunami propagations and their interactions with a 2D sloping beach and Ohkushiri island, and to predict maximum wave run-up around the island. The Navier-Stokes (NS) and continuity equation are governed in the computational domain and the boundary values updated at each time step by a finite-difference time-marching scheme in the frame of rectangular coordinate system. The fully nonlinear kinematic free-surface condition is satisfied by the modified marker-density function technique. The Nearshore Tsunami is assumed to be a solitary wave and generated from the numerical wavemaker in the developed Digital Wave Tank. The simulation results are compared with the experiments and other numerical methods based on the shallow-water wave theory.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.5 no.3
• /
• pp.275-280
• /
• 2010

In this paper, VoIP(Voice over Internet Protocol) transmission performance for MANET(Mobile Ad-hoc Networks) is improved and analyzed with packet aggregation scheme which is aggregating some of short length packets to one large packet and sending to networks. VoIP simulator based on NS(Network Simulator)-2 is implemented and used to measure performance of VoIP traffic transmission. In this simulation, VoIP traffics are generated with parameters of some codes such as G.711, G.729A, GSM.AMR and iBLC. MOS(Mean Opinion Score), end-to-end network delay, packet loss rate and transmission bandwidth are measured. Performance improvements of 98% for MOS, 6.4times for end-to-end network delay, 32times for packet loss rate is shown as simulation results. On the other hand, transmission bandwidth is increased about maximum 10%. Finally, VoIP implementation guide for the performance with packet aggregation is suggested.