• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.783-786
• /
• 2015

Hole attack, which is disturbed transmission function through change of routing information, can cause critical results for MANET as non-infrastructure network. Backhole attack, as a typical hole attack, is one malicious attack which is disabled network transmission function by assumption of transmission data through modification of routing information. It is very important to evaluate transmission performance caused by blackhole attack, because transmission performance of MANET is affective with blackhole attack. In this paper, transmission performance is analyzed with MANET under multiple blackhole attacks caused multiple blackhole nodes. Computer simulation based on NS-2 is used as analysis tool and voice traffic is considered ad application service on MANET.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.637-640
• /
• 2011

Recently, rapid spreading of smart-phone make an expectation for increase of practical application for MANET(Mobile Ad-Hoc Network) which is not used infrastructure like as base-station. One of important application for MANET will be VoIP(Voice over Internet Protocol) known as Internet telephony. On the other hand, information intrusions causing serious problems is not allowed exception of MANET. Especially, there are some dangerous problems of intrusions to MANET, differently to other networks, because of it's usage of military purpose or emergency application of rescue. In this paper, to analyze this intrusion problem on MANET with blackhohe attacks, effect of intrusion to transmission performance is studied. VoIP traffic is assumed as an application service on MANET, computer simulation with NS-2 is used for this analysis.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.29 no.2
• /
• pp.288-293
• /
• 2000

This study was carried out to investigate the effect of crude saponin fracton from Korean red ginseng on physiological events of ovariectomized rats. The saponin fractions was prepared by Diaion HP-20 adsorption chromatography and spirit. Total 50 rats were divided into 5 groups : normal control (NC), sham-ovariectomized (SO), ovariectomized (OR), ovariectomized and saponin treated (OS), and normal control treated with saponin (NS). Saponin was intraperitonally administered for 8 weeks. Ovariectomy was carried out at 1 st and 2nd weeks of experiment. Right-side ovary of rat was removed at 1st week, the otehr was done at 2nd week. The body weights fo ovariectomized rats showed no significant changes but that of NS group showed significant increase (p<0.05) compared with NC group. Ovariectomy of rats reduced the weights of femur by 6 to 8% compared with that of NC group. In addition, femur weight of NS group was 5 to 6% higher than that of NC. Uterus weight showed no significant differences by saponin treatment or ovariectomy. Serum testosterone level of ovariectomized rats increased by 60 times compared with that of NC. However, administration of crude saponin to ovariectomized rat attenuated testosterone level to almost that of NC. These results suggest that Korean red ginseng saponin attenuates physiological disorders induced by malfunction of ovary.

• Physical Therapy Rehabilitation Science
• /
• v.10 no.2
• /
• pp.134-140
• /
• 2021

Objective: The purpose of this study was to investigate the alteration of upper cervical manipulation to autonomic nervous system (ANS) through the heart rate variability(HRV) analysis in young healthy individuals. Design: Two-group pretest-posttest design. Methods: Thirty four young healthy participants (17 males and 17 females) were randomized into the 2 groups, such as the upper cervical manipulation group (UCM group, n=17), neck stretching group (NS group, n=17). UCM group received a upper cervical manipulation, especially on the atlas, and NS group did stretch for both side of upper trapezius and levator scapular. For the UCM, Atlas mobility was checked by therapist and thrust was given once at the posterior arch of Atlas. HRV was measured before and after intervention to investigate ANS alteration. After the intervention, both groups were given 3 minutes break-time before measuring HRV. Results: The UCM group showed significant differences in ANS Activity, Stress Resistance, Stress index and Fatigue Index (p<0.05) while no differences in NS group with before and after intervention. There were significant differences in ANS Activity, Stress Resistance, and Fatigue Index between groups (p<0.05). Conclusions: This study suggected that upper cervical manipulationhas positive effects on the ANS activity, stress resistance, and fatigue index.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.54 no.6
• /
• pp.861-868
• /
• 2021

To confirm the influence of modified starch on frozen storage stability, the microstructure and sensory characteristics of fish cakes, called Eomuk in Korea, by using seven varieties of starch, including native starch (NS), physically treated corn starch (MS) and modified starch [treatment with acetate (SA-1, SA-2 and SA-3), hydroxypropyl (HS), and acetylated distarch adipate (ADA)] were evaluated. Scanning electron microscopy (SEM) photographs showed fish cakes with NS had a finer and denser network structure than those made with modified starches. During frozen storage, fish cakes with HS and ADA exhibited a stable structure, as evaluated by porosity and rough surface. The results of the sensory evaluation showed that modified starch, including HS, SA-2 and ADA, increased the taste and firmness of the fish cakes, while NS, MS and the modified starch SA-3 resulted a decrease in the sensory properties during storage. Therefore, HS, SA-2 and ADA are suitable additives to improve the sensory quality of frozen fish cakes.

• The Plant Pathology Journal
• /
• v.27 no.3
• /
• pp.266-271
• /
• 2011

Physicochemical characteristics and heavy metal content of soils located along the drainage way of an abandoned mine at Busan, Korea ($35^{\circ}31'N$, $129^{\circ}22'E$) (contaminated soil; CS) and uncontaminated soils (50-70 m apart from the drainage way) (NS) were examined. Growth of tomato plants (Solanum lycopersicom cv. Rutgers) in CS and NS, development of the root-knot nematode (Meloidogyne incognita) as root-knot gall formation on tomato plants, and non-parasitic nematode populations in soil were also examined. Growth of tomato plants, root-knot gall formation, and non-parasitic nematode populations were significantly reduced in CS with higher As content, lower pH, higher electrical conductivity (EC), and lower available phosphate (av. $P_2O_5$) than in NS. None of the other physicochemical characters examined differed significantly between CS and NS (low and no significance) and were above or below the critical levels detrimental to plant growth and nematode development, suggesting that As may be the primary hazardous heavy metal in CS. The toxicity of As might be enhanced at low pH in CS because exchangeable forms of some heavy metals increase with the decrease of soil pH. The heavy metals, especially As, may have contributed to increasing EC and decreasing av. $P_2O_5$. Therefore, the effects of mine drainage contamination from the abandoned mine were derived primarily from contamination by heavy metals such as As. These may have been enhanced in toxicity (solubility) by the lowered pH, increased soil salinity (EC) and decreased av. $P_2O_5$. Our results suggest synergistic adverse effects on the plant and the nematode by decreasing osmotic potential and nutrient availability.

• KIEAE Journal
• /
• v.8 no.3
• /
• pp.77-83
• /
• 2008

The effective mixture of structural laminated timber and other materials is expected to extend the potentials of building structures because of the potentials to realize high performance in structural safety. The classical joint types using drift pin and bolts are occurred local failures due to the small bearing area. In result, new joints using H shaped steel were suggested in this research. The objective of this study is to evaluate elasto-plastic behaviors by strengthening types of wood frames with new joints connecting structural laminated timber with H shaped steel. A total of five specimens of about one-second scale were tested. Specimens had columns with 1,050 height and $84mm{\times}100mm$ section, and a beams with 1,950mm length and $130mm{\times}100mm$ section. Also, the specimens were stiffened by brace, hwang-toh brick, and autoclaved lightweight concrete. The results of the test showed that the specimen stiffened with autoclaved lightweight concrete was characterized by fairly good strength and stiffness than those of the other specimens. Initial stiffness of H-2.0D-NS specimen with 2 times inserting length of beam height showed 1.33 times than that of H-1.5D-NS specimen. However, the strength of H-2.0D-NS specimen has not improved too much than H-1.5D-NS specimen.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.526-529
• /
• 1998

This paper describes new sense amplifier with fast sensing delay time of 0.54ns and 32kb CMOS embedded SRAM with 4.67ns access time for a 3-V powr supply. It was achieved using the sense amplifier with multiple point sensing scheme and high speed bit-line scheme. The sense amplifier saves 25% of the power dissipation compared with the conventional one while maintaining a very short sensing delay. The SRAM uses 0.5.mu.m double-polysilicon and triplemetal CMOS process technology. A die size is 1.78mm*2.13mm.

• Journal of Electrical Engineering and information Science
• /
• v.3 no.3
• /
• pp.300-305
• /
• 1998

This paper describes new sense amplifier with fast sensing delay time of 0.54ns and 32kb CMOS embedded SRAM with 4.67 ns access time for a 3-V power supply. It was achieved using the sense amplifier with multiple point sensing scheme and highs peed bit-line scheme. The sense amplifier saves 25% of the power dissipation compared with the conventional one while maintaining a very short sensing delay. The SRAM uses 0.5m double-polysilicon and triple-metal CMOS process technology. A die size is 1.78${\times}$mm2.13mm.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.3
• /
• pp.236-244
• /
• 2010

In this paper, a planar structure negative group delay circuit(NGDC) is proposed to overcome the limited availability of the component values required for the prototype lumped element(LE) NGDC design. From the prototype LE circuit analysis, general design equations and the conditions to obtain the NGD are derived and illustrated. Then the LE circuit is converted into the planar structure by applying the transmission line resonator(TLR) theory. As a design example, the LE NGDC and the proposed planar structure NGDC are designed and compared. To estimate the commercial applicability, 2-stage reflection type planar NGDC with -5.6 ns of total group delay, -0.2 dB of insertion loss, and 30 MHz of bandwidth together with 0.1 dB and 0.5 ns of the magnitude and group delay flatness, respectively, for Wideband Code Division Multiple Access(WCDMA) downlink band is fabricated and demonstrated. Also, to show the applicability of the proposed NGDC, we have configured a simple signal cancellation loop and obtained good loop suppression performance.