• The Transactions of the Korean Institute of Power Electronics
• /
• v.17 no.2
• /
• pp.158-165
• /
• 2012

In this paper, the test bed using three-phase PWM converter connected with single phase inverter in series is set up to configure an active AC electric load. Since the two topologies, three-phase PWM converter and single-phase inverter, can be operated bidirectionally, the system not only re-generates surplus power to grid but also prevents power dissipation. However, the construction of system has a drawback. That is, ripple components two times of inverter operation frequency occur at DC-Link due to cascade connection, it can be cause of three phase unbalance Since the operational characteristic of the active AC electric load, the power frequency entered into the electric load can be varied, and the ripple of DC-Link is changed as well. In this paper, the three-phase PWM converter using a variable notch filter is proposed, and the reduction of three-phase current unbalance is presented. the validity of the proposed PWM converter using a variable notch filter is verified by the simulation and experimental results.

• Journal of information and communication convergence engineering
• /
• v.8 no.4
• /
• pp.365-369
• /
• 2010

In this paper, a novel notch resonator is proposed based on Rectangular Split Ring Resonator (RRSS) element. We represented the electrical characteristics for R-SRR elements coupled with microstrip line, and measured result is compared with electromagnetic simulation (HFSS) result. We also solved equivalent circuit for R-SRR element, and also discussed influences of change structural parameters of R-SRR. The size of R-SRR is the most important parameters for frequency tuning. Also we can make tunable resonator form the basic structure. This novel resonator can apply to design of tunable bandpass filter and voltage control oscillator.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.2C
• /
• pp.93-98
• /
• 2011

Currently, The new communication system was very important because of the increasing demand for Internet access. One of these alternatives is the PLC. But, Power Line is not suitable for communication. So, electromagnetic wave is generated from Power Line during flow of communication information. And the electromagnetic wave is interfered with Wireless Communication Service using the same frequency range. To eliminate this interference by used Notch tilter. Wavelet OFDM in another way, while one is used. In this paper, Wavelet OFDM CIC filter used in the CMFB structure by applying a further lowering the value of the side-lobe is proposed to improve performance.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.19 no.3
• /
• pp.276-282
• /
• 2014

In a single-phase grid-connected power system consisting of a dc-dc converter and a dc-ac converter, the current drawn from renewable energy sources has a tendency to be pulsated and contains double-fundamental frequency ripple components, which results in several drawback such as a power harvesting loss and a shortening of the energy source's life. This paper presents a new double-fundamental current reduction-scheme with a fast dc-link voltage loop for two-stage dc-dc-ac grid connected systems. In the frequency domain, an adequate control design is performed based on the small-signal transfer function of a two-stage dc-dc-ac converter. To verify the effectiveness of proposed control algorithm, a 1 kW hardware prototype has been built and experimental results are presented.

• International Journal of Internet, Broadcasting and Communication
• /
• v.13 no.1
• /
• pp.161-167
• /
• 2021

This paper proposes a new personalized HRTF estimation method which is based on a deep neural network (DNN) model and improved elevation reproduction using a notch filter. In the previous study, a DNN model was proposed that estimates the magnitude of HRTF by using anthropometric measurements [1]. However, since this method uses zero-phase without estimating the phase, it causes the internalization (i.e., the inside-the-head localization) of sound when listening the spatial sound. We devise a method to estimate both the magnitude and phase of HRTF based on the DNN model. Personalized HRIR was estimated using the anthropometric measurements including detailed data of the head, torso, shoulders and ears as inputs for the DNN model. After that, the estimated HRIR was filtered with an appropriate notch filter to improve elevation reproduction. In order to evaluate the performance, both of the objective and subjective evaluations are conducted. For the objective evaluation, the root mean square error (RMSE) and the log spectral distance (LSD) between the reference HRTF and the estimated HRTF are measured. For subjective evaluation, the MUSHRA test and preference test are conducted. As a result, the proposed method can make listeners experience more immersive audio than the previous methods.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1972-1974
• /
• 2004

This paper describes the high pass filter with notch charecteristics. The proposed circuits configuration consists of two uniformly distributed RC line (herein after is called URC) and two gain amplifiers ($K_1$ and $K_2$). With the appropriate $K_1$ and $K_2$ , the circuit has a steeper slope of magnitude response at pass band steeper than using a single gain amplifier.

• 제어로봇시스템학회:학술대회논문집
• /
• 1998.10a
• /
• pp.81-84
• /
• 1998

For ANC systems applied to aircrafts or passenger ships, engines from which reference signals are usually measured are located so far from seats where main part of controllers are placed. It can make feedforward ANC scheme difficult to implement or very costly. Feedback ANC algorithms which do not require reference signals and use error signals alone to update the filter, are usually sensitive to measurement noise ' and impulse noise. In this paper, reference signal needed for the feedforward control is not measured directly but generated with the estimated frequencies. Cascade adaptive notch filter (ANF), which has the low computational burden, is used to implement ANC system in real time. Several ANFs of order 2 are connected in series to estimate multiple sinusoids. Computer simulations and experiments in the laboratory for verifying efficacy of the proposed algorithm are carried out.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.2 no.3
• /
• pp.71-78
• /
• 2009

In this study, estimation of heart rate from measured PPG signal is proposed. PPG signal is to be measured blood flow in a blood vessel effected by systole and diastole. PPG sianl has single frequency so that PPG frequency can be tracked by 2nd IIR adaptive notch filter. PPG frequency is obtained continually from updating filter coefficient throughout adaptive algorithm and then the heart rate of human is approximately estimated.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.5
• /
• pp.435-441
• /
• 2017

Detecting an inter-harmonic accurately is not easy work, because it has small magnitude, and its frequency which can be observed is not an integer multiple of fundamental frequency. In this paper, a new method using filter bank system and adaptive predictor is proposed. Filter bank system decomposes input signal to sub bands. In adaptive predictor, inter-harmonic is detected with decomposed sub band signal as input, and error signal as output. In this scheme, input-output characteristic of adaptive predictor is notch filter, as predicted harmonic is canceled in error signal, so detecting an inter-harmonic can be possible. Magnitude and frequency of detected inter-harmonic is estimated by recursive algorithm. The performances of proposed method are evaluated to sinusoidal signal model synthesized with harmonics and inter-harmonics. And validity of the method is proved as comparing the inter-harmonic detection results to MUSIC and ESPRIT.

• Journal of the Institute of Convergence Signal Processing
• /
• v.20 no.1
• /
• pp.45-50
• /
• 2019

When PPG signal is used in mobile healthcare devices, the accuracy of the measured heartbeat decreases from the influence by the movement of the user. The reason is that the frequency band of the noise overlaps the frequency band of the PPG signal. In order to remove these same noises, the methods using frequency analysis method or application of acceleration sensor have been investigated and showed excellent performance. However, in applying these methods to low-cost healthcare devices, it is difficult to apply these methods because of much processing time and sensor's cost. In order to solve these problems, this study proposed the filter design method using an adaptive notch filter and the fuzzy inference system to extract more accurate heart rate in real time and evaluated its performance. As results, it showed better results than the other methods. Based on the results, when applying the proposed method to design the mobile healthcare device, it is possible to measure the heartbeat more accurately in real time.