• 제목/요약/키워드: normalized coefficient

검색결과 316건 처리시간 0.03초

스파크 점화기관의 공회전 시 싸이클 변동에 영향을 주는 인자 고찰 (Study on Factors Influencing Cyclic Variations at Idle in Spark Ignition Engine)

  • D.H. Kwon;Park, Y.K.;Kim, J.M.
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2003년도 춘계학술대회 논문집
    • /
    • pp.1249-1252
    • /
    • 2003
  • To analyse the cyclic variations in a test engine, the burn parameters are determined on a cycle-to-cycle basis through the analysis of the engine pressure data. Combustion analysis based on cylinder-pressure provides a mechanism through which a combustion researcher can understand the combustion process. The objective of this paper is to identify the most significant sources of cycle-to-cycle combustion variability in a spark ignition engine at idle. The burn rate analysis program was used and the burn parameters were used to determine the variations in the input parameter. In this study, the author investigated the relationship of indicated mean effective pressure, coefficient of variation of indicated mean effective pressure and burn angles, and lowest normalized value in a spark ignition engine for the cyclic variations.

  • PDF

Sensitivity of quantitative symmetry measurement algorithms for convergent beam electron diffraction technique

  • Hyeongsub So;Ro Woon Lee;Sung Taek Hong;Kyou-Hyun Kim
    • Applied Microscopy
    • /
    • 제51권
    • /
    • pp.10.1-10.9
    • /
    • 2021
  • We investigate the sensitivity of symmetry quantification algorithms based on the profile R-factor (Rp) and the normalized cross-correlation (NCC) coefficient (γ). A DM (Digital Micrograph©) script embedded in the Gatan digital microscopy software is used to develop the symmetry quantification program. Using the Bloch method, a variety of CBED patterns are simulated and used to investigate the sensitivity of symmetry quantification algorithms. The quantification results show that two symmetry quantification coefficients are significantly sensitive to structural changes even for small strain values of < 1%.

섬유혼합토의 동적물성변형특성 (Dynamic Deformation Characteristics of Fiber Reinforced Soils)

  • 정성용;김대일;박철수;목영진
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2004년도 춘계학술발표회
    • /
    • pp.968-976
    • /
    • 2004
  • 본 논문에서는 여러 가지 입도의 사질토에 폴리프로필렌(polypropylene) 재질의 단섬유(staple fiber)를 중량비 0.3%로 혼합한 섬유혼합도의 거동특성과 보강효과를 평가하였다. 곡류계수는 일정하게 유지하고 균등계수를 변화시켜 성형한 공사체에 공진주시험을 수행하였다. 섬유혼합토의 최대전단탄성계수는 비혼합토에 비해 최대 30%까지 증가하였고, 비선형 영역에서의 전단탄성계수 감소량도 억제되었다. 섬유혼합토의 정규화 전단탄성계수 감소곡선이 Seed와 Idriss의 대표곡선 상한값 쪽으로 이동해, 비혼합토보다 얇은 밴드로 분포하여 섬유의 혼합이 흙의 강성 증가에 효과적임을 증명되었다.

  • PDF

SIFT 기법을 이용한 중.저해상도 위성영상간의 자동 기하보정 (Automatic Image-to-Image Registration of Middle- and Low-resolution Satellite Images Using Scale-Invariant Feature Transform Technique)

  • 한동엽;김대성;이재빈;오재홍;김용일
    • 한국측량학회지
    • /
    • 제24권5호
    • /
    • pp.409-416
    • /
    • 2006
  • 영상 기하보정은 여러 가지 데이터의 조합으로부터 얻어질 수 있는 영상 분석 작업에 매우 중요한 전처리 과정 중 하나다. 본 연구는 최근 평면 영상간 기하보정에 많이 사용하고 있는 SIFT 기법을 적용하여, 다양한 해상도를 가진 위성영상의 자동 기하보정을 수행하는데 초점을 맞추고 있다. 2차원 영상의 조건을 만족하기 위해 기복변위의 영향이 상대적으로 적은 중 저해상도 위성영상의 기하보정을 수행하였으며, 다양한 해상도 영상을 조합함으로써 공간해상도의 차이를 보이는 영상의 기하보정에 SIFT 기법을 적용할 수 있는지를 실험하였다. 결과를 통해, SIFT 기법이 기존의 상관계수를 이용하여 특징점의 정합을 수행하는 방법에 비해 높은 정합률을 나타냈으며, 추출된 정합쌍을 자동 영상 기하보정에 사용할 수 있을 것으로 기대한다.

회절격자 주기의 랜덤 변이가 DFB 레이저 특성에 미치는 영향 (Effects of the Random Fluctuation in Grating Period on the Characteristics of DFB Lasers)

  • 한재웅;김상배
    • 대한전자공학회논문지SD
    • /
    • 제37권8호
    • /
    • pp.76-85
    • /
    • 2000
  • 회절격자 주기의 랜덤 변이가 DFB 레이저의 특성에 미치는 영향을 유효 굴절률 전달 매트릭스 방법을 이용하여 해석하였다. 레이저의 양 거울면은 완전 무반사 처리되었다고 가정하였으며, 회절격자 주기의 변이는 Gaussian 랜덤 변수로 표현하였다. 회절격자 주기의 랜덤 변이는 균일 회절격자 DFB 레이저와 QWS-DFB 레이저 스펙트럼의 대칭성을 깨뜨리고 유효 결합계수를 감소시킨다. 이에 따라 균일 회절격자 DFB 레이저에서는 ${\pm}$1모드 거울면 손실의 평균값이 증가하고 금지 대역폭이 감소하며, QWS-DFB 레이저에서는 단일모드 안정성과 파장 정확도가 저하된다. QWS-DFB 레이저의 거울면 손실 차이는 결합계수에 관계없이 회절격자 주기의 랜덤 변이가 카짐에 따라 감소하고, spatial hole-burning 효과는 정규화된 결합계수가 1.5보다 클 때에는 주는 데 반하여 작을 때에는 커진다.

  • PDF

Thaw consolidation behavior of frozen soft clay with calcium chloride

  • Wang, Songhe;Wang, Qinze;Xu, Jian;Ding, Jiulong;Qi, Jilin;Yang, Yugui;Liu, Fengyin
    • Geomechanics and Engineering
    • /
    • 제18권2호
    • /
    • pp.189-203
    • /
    • 2019
  • Brine leakage is a common phenomenon during construction facilitated by artificial freezing technique, threatening the stability of frozen wall due to the continual thawing of already frozen domain. This paper takes the frequently encountered soft clay in Wujiang District as the study object, and remolded specimens were prepared by mixing calcium chloride solutions at five levels of concentration. Both the deformation and pore water pressure of frozen specimens during thawing were investigated by two-stage loading tests. Three sections were noted from the changes in the strain rate of specimens during thawing at the first-stage load, i.e., instantaneous, attenuated, and quasi-stable sections. During the second-stage loading, the deformation of post-thawed soils is closely correlated with the dissipation of pore water pressure. Two characteristic indexes were obtained including thaw-settlement coefficient and critical water content. The critical water content increases positively with salt content. The higher water content of soil leads to a larger thaw-settlement coefficient, especially at higher salt contents, based on which an empirical equation was proposed and verified. The normalized pore water pressure during thawing was found to dissipate slower at higher salt contents, with a longer duration to stabilize. Three physical indexes were experimentally determined such as freezing point, heat conductivity and water permeability. The freezing point decreases at higher salt contents, especially as more water is involved, like the changes in heat conductivity. The water permeability maintains within the same order at the considered range of salt contents, like the development of the coefficient of consolidation. The variation of the pore volume distribution also accounts for this.

Dose metrology: TLD/OSL dose accuracy and energy response performance

  • Omaima Essaad Belhaj;Hamid Boukhal;El Mahjoub Chakir;Meryeme Bellahsaouia;Siham Belhaj;Younes Sadeq;Mohammed Tazi;Tahar El Khoukhi;Maryam Hadouachi;Khaoula Laazouzi
    • Nuclear Engineering and Technology
    • /
    • 제55권2호
    • /
    • pp.717-724
    • /
    • 2023
  • An essential step in evaluating and comparing the performance of two passive radiation dosimeter types, thermosluminescent (TLD) and optically stimulated luminescence (OSL), used by workers in environments with ionizing radiation for individual radiological monitoring and control of external exposure at various times (cumulative dose for 1 month), is to compare the measured dose accuracy, energy response, and coefficient of variation. In fact this performance study consists in determining the accuracy of both R(10) and R(0.07) which are considered as the ratios of the measured dose (Hp(10) or Hp(0.07)) to the delivered dose (Hp(10) or Hp(0.07)) for each photon energy. The validity of the results of this test is based on the acceptance limits of the ICRP and the international standard IEC-62387. The relative energy response used is normalized to the 137Cs 662 keV energy to find which energy response is closest to the ideal case, and the coefficient of variation that allows to determine the statistical fluctuation of the Hp(10) and Hp(0.07) doses. The results of the accuracy test for the OSL and TLD dosimeters are acceptable because they fall within the ICRP limits. For the energy response, the OSL performs better than the TLD for Hp(10) and Hp(0.07), and for the coefficient of variation, the OSL satisfies the requirements of ISO 62387 for both Hp(10) and Hp(0.07), while the TLD satisfies these requirements only for the measurement of Hp (0.07).

명암도 기반의 의료영상 정합을 위한 최적화 방법 (Optimization Methods for Medical Images Registration based on Intensity)

  • 이명은;김수형;임준식
    • 전자공학회논문지CI
    • /
    • 제46권6호
    • /
    • pp.1-6
    • /
    • 2009
  • 본 논문에서는 명암도 기반의 의료영상 정합을 위한 최적화 방법을 소개하고자 한다. 제안하는 최적화 방법은 조건부 확률의 엔트로피에 기반한 측도를 사용함으로써 수행된다. 본 논문에서는 정합을 수행하기 위해서 주어진 두 영상의 명암도에 대한 조인트 히스토그램으로부터 계산된 조건부 엔트로피를 개선하여 새로운 정합 방법의 측도로써 정의한다. 그리고 기존의 명암도 기반의 방법들 즉, 명암도 차이 측정을 이용한 방법, 상관계수를 이용한 방법, 상호정보량을 이용한 방법 등과 비교 실험을 수행한다. 단일 모달리티 뇌 MR 영상을 이용한 실험과 서로 다른 모달리티 뇌 MR 영상과 CT 영상의 정합 결과를 통해서 성능을 평가한다. 실험결과에 의하면 제안한 방법이 기존의 최적화 방법들 널다 최적화 하는데 소요되는 시간이 더 빠르고 정확한 정합이 됨을 알 수 있다.

중국 동북3성에서의 옥수수 수확량과 위성기반의 식생 지수 및 농업기후요소와의 상관성 연구 (Correlation between the Maize Yield and Satellite-based Vegetation Index and Agricultural Climate Factors in the Three Provinces of Northeast China)

  • 박혜진;안중배;정명표
    • 대한원격탐사학회지
    • /
    • 제33권5_2호
    • /
    • pp.709-720
    • /
    • 2017
  • 본 연구에서는 지난 20년간(1996~2015) 중국 동북 3성에서의 옥수수 수확량과 위성기반 식생지수인 NDVI (Normalized Difference Vegetation Index) 그리고 여러 기후요소들간의 월별 상관성을 분석하고자 하였다. 중국 동북 3성의 옥수수 재배지역에서 옥수수 수확량은 작황시기의 NDVI와 통계적으로 유의한 양의 상관관계를 보였고, 8월과 9월의 최고기온 및 여름철 $30^{\circ}C$ 이상의 고온 발생빈도와 음을 상관관계를 가졌다. 옥수수 수확량과 강수량간의 상관관계는 7월에 요녕성에서만 유의한 양의 계수를 나타내었고 길림성과 흑룡강성에서는 상관성이 나타나지 않았다. 본 연구를 통해 중국 동북 3성의 옥수수 수확량을 추정하기 위해서는 NDVI와 최고기온 자료를 예측인자로 사용하는 것이 적합할 것으로 생각된다.

천해환경에서 적응 알고리즘을 이용한 음향 등화기의 성능 비교 (Performance Comparison of Acoustic Equalizers using Adaptive Algorithms in Shallow Water Condition)

  • 췌명;박규칠
    • 한국정보통신학회논문지
    • /
    • 제22권2호
    • /
    • pp.253-260
    • /
    • 2018
  • 천해 환경에서의 수중 음향 통신 채널은 전형적으로 시변 다중 경로 페이딩 채널 특성을 나타낸다. 이러한 채널 전송을 통해 수신된 신호는 시간 지연 및 진폭의 중첩에 의해 심볼 간 간섭을 유발한다. 이를 보완하기 위해 여러 기술이 사용되었으며, 그 중 하나가 음향 등화기이다. 본 연구에서는 심볼 간 간섭을 보상하기 위해 feed-forward equalizer (FFE), decision direct equalizer (DDE), decision feedback equalizer (DFE) 및 DFE와 결합된 DDE의 4 종류의 등화기와 등화기의 계수를 조정하기 위해 normalized least mean square (NLMS) 알고리즘과 recursive least square (RLS) 알고리즘의 2 종류의 알고리즘을 적용하였다. 그 결과 비선형 등화기에서는 신호 대 잡음비 6 dB 이상에서 상당한 성능 향상을 발견할 수 있었으며, DFE와 DDE의 조합은 어떤 경우에도 최고의 성능을 발휘하였다.