• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1999.06a
• /
• pp.220-224
• /
• 1999

Sliding wear test was employed to determine the effect of whisker content and orientation on the firiction and wear behavior of SiC whisker reinforced alumina. Composites containing unidirectionally oriented whiskers were prepared by a modified tape casting followed by lamination, binder removal and hot pressing in order to align the whiskers in the tape casting direction. Wear coefficients on three directions were measured; parallel and normal to the tape casting direction on the tape casting surface and normal to lamination direction on surfnce normal to the tape casting direction. In the effect of whisker orientation, the highest wear rate was obtained in the direction parallel tape casting direction and the lowest in the direction normal to lamination direction at all temperatures. Silicon oxide layer amoothing the surface was detected by energy dispersive X-ray analysis on the worn surface.

• Journal of Computational Design and Engineering
• /
• v.1 no.2
• /
• pp.88-95
• /
• 2014

Because the cost of performance testing using actual products is expensive, manufacturers use lower-cost computer-aided design simulations for this function. In this paper, we propose using hexahedral meshes, which are more accurate than tetrahedral meshes, for finite element analysis. We propose automatic hexahedral mesh generation with sharp features to precisely represent the corresponding features of a target shape. Our hexahedral mesh is generated using a voxel-based algorithm. In our previous works, we fit the surface of the voxels to the target surface using Laplacian energy minimization. We used normal vectors in the fitting to preserve sharp features. However, this method could not represent concave sharp features precisely. In this proposal, we improve our previous Laplacian energy minimization by adding a term that depends on multi-normal vectors instead of using normal vectors. Furthermore, we accentuate a convex/concave surface subset to represent concave sharp features.

• Journal of Acupuncture Research
• /
• v.27 no.5
• /
• pp.89-96
• /
• 2010

Objectives : This study is designed to evaluate the diagnostic significances of DITI on the patients of low back pain according to impression, symptoms and medical history. Methods : According to impression, symptoms and medical history, thermal changes of $BL_{23}$, $BL_{26}$, $BL_{40}$, $BL_{57}$, $GB_{31}$ and $BL_{60}$ were compared forty-eight low back pain patients and twenty-three normal group. Results : Surface temperature of $BL_{26}$ in case of L-spine HNP is significantly higher than normal group. Surface temperature of $BL_{26}$ in case of low back pain is significantly higher, $GB_{31}$ of radiating pain is significantly lower than normal group. Surface temperature of $BL_{26}$ in case of acute stage is significantly higher, $GB_{31}$ of chronic stage is significantly lower than normal group. Conclusions : Thermal changes of $BL_{26}$ and $GB_{31}$ on the patients of low back pain compared with normal group, according to impression, symptoms and medical history has significances.

• Journal of KSNVE
• /
• v.7 no.6
• /
• pp.975-984
• /
• 1997

A direct boundary element method (DBEM) is developed for thin bodies whose surfaces are rigid or compliant. The Helmholtz integral equation and its normal derivative integral equation are adoped simultaneously to calculate the pressure on both sides of the thin body, instead of the jump values across it, to account for the different surface conditions of each side. Unlike the usual assumption, the normal velocity is assumed to be discontinuous across the thin body. In this approach, only the neutral surface of the thin body has to be discretized. The method is validated by comparison with analytic and/or numerical results for acoustic scattering and radiation from several surface conditions of the thin body; the surfaces are rigid when stationary or vibrating, and part of the interior surface is lined with a sound-absoring material.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10a
• /
• pp.816-820
• /
• 1990

This paper is pre-stage for getting EGI which can be used for modeling of an object. It discusses the construction of the vision processing system and its algorithm for getting needle diagram from tie object image. We realize the algorithm with monocular camera system, using Reflectance Map theory and photometric stereo method. We can calculate the surface normal at any point in the image if we take multiple images at the different lighting conditions. From the 3 images taken from different lighting conditions through the experiment, we get the needle diagrams of the sphere and the object. We confirm the validness of the surface, normal acquisition algorithm comparing the experimental needle diagram with the ideal one obtained from the surface normal of the known object.

• Membrane and Water Treatment
• /
• v.1 no.1
• /
• pp.83-92
• /
• 2010

To improve the antifouling characteristics of polypropylene hollow fiber microporous membranes in a submerged membrane-bioreactor for wastewater treatment, the surface-modification was conducted by Ar plasma treatment. Surface hydrophilicity was assessed by water contact angle measurements. The advancing and receding water contact angles reduced after the surface modification, and hysteresis between the advancing and receding water contact angles was enlarged after Ar plasma treatment due to the increased surface roughness after surface plasma treatment. After continuous operation in a submerged membrane-bioreactor for about 55 h, the flux recovery after water cleaning and the flux ratio after fouling were improved by 20.0 and 143.0%, while the reduction of flux was reduced by 28.6% for the surface modified membrane after 1 min Ar plasma treatment, compared to those of the unmodified membrane. Morphological observations showed that the mean membrane pore size after Ar plasma treatment reduced as a result of the deposition of the etched species; after it was used in the submerged membrane-bioreactor, the further decline of the mean membrane pore size was caused by the deposition of foulants. X-ray photoelectron spectroscopy and infrared spectroscopy confirmed that proteins and polysaccharide-like substances were the main foulants in the precipitate.

• Carbon letters
• /
• v.25
• /
• pp.84-88
• /
• 2018

At present, an important research area is the search for materials that are compatible with CMOS technology and achieve a satisfactory response rate and modulation efficiency. A strong local field of graphene surface plasmon polariton (SPP) can increase the interaction between light and graphene, reduce device size, and facilitate the integration of materials with CMOS. In this study, we design a new modulator of SPP-based cycle branch graphene waveguide. The structure comprises a primary waveguide of graphene-$LiNbO_3$-graphene, and a secondary cycle branch waveguide is etched on the surface of $LiNbO_3$. Part of the incident light in the primary waveguide enters the secondary waveguide, thus leading to a phase difference with the primary waveguide as reflected at the end of the branch and interaction coupling to enhance output light intensity. Through feature analysis, we discover that the area of the secondary waveguide shows significant localized fields and SPPs. Moreover, the cycle branch graphene waveguide can realize gain compensation, reduce transmission loss, and increase transmission distance. Numerical simulations show that the minimum effective mode field area is about $0.0130{\lambda}^2$, the gain coefficient is about $700cm^{-1}$, and the quality factor can reach 150. The structure can realize the mode field limits of deep subwavelength and achieve a good comprehensive performance.

• Journal of Computational Design and Engineering
• /
• v.2 no.1
• /
• pp.67-72
• /
• 2015

Recently, along with the improvements of geometry modeling methods using sketch-based interface, there have been a lot of developments in research about generating surface model from 3D curves. However, surfacing a 3D curve network remains an ambiguous problem due to the lack of geometric information. In this paper, we propose a new algorithm for estimating the normal vectors of the 3D curves which accord closely with user intent. Bending energy is defined by utilizing RMF(Rotation-Minimizing Frame) of 3D curve, and we estimated this minimal energy frame as the one that accords design intent. The proposed algorithm is demonstrated with surface model creation of various curve networks. The algorithm of estimating geometric information in 3D curves which is proposed in this paper can be utilized to extract new information in the sketch-based modeling process. Also, a new framework of 3D modeling can be expected through the fusion between curve network and surface creating algorithm.

• Industry Promotion Research
• /
• v.1 no.2
• /
• pp.1-6
• /
• 2016

By using the high tensile steel plate (SPFH590) 1 Primary normal shear process clearance was studied through an experiment for the effect of the second shaving process in this study. Experiment result, Shaving process in the case of processed 15% of the Primary normal shear process clearance was some residual surface does not remove it completely. and Shaving process of shearing products by the general shearing process clearance of 10% it was found that the wider the size of shear surface. The shear surface of 93% occurred in case of the clearance of general shearing process is 10% and the Shaving clearance is 2%, The shear surface of 87% were to occur in case of the Shaving clearance is 3%.

• International Journal of Internet, Broadcasting and Communication
• /
• v.13 no.1
• /
• pp.187-193
• /
• 2021

In this paper, we propose an image watermarking technique that effectively hides confidential data in the LSB of image pixels by utilizing the characteristics of the image. In the proposed technique, the image is precisely divided into boundary surface and normal region other than the boundary surface and performs different processing. The boundary surface existing in the image is created by meeting different regions and contains important information of the image. One bit of confidential data is concealed in the LSB of the pixel at the boundary surface to preserve the characteristics of the boundary surface. In normal region other than the boundary surface, the pixel values are similar, and the change with the adjacent pixel values is smooth. Based on this property, even if the 2 bits of confidential data are hidden in the lower 2 bits of the pixel in the normal region, the difference cannot be visually distinguished. When confidential data is concealed in an image as described above, the amount of confidential data concealed in an image can be increased while maintaining excellent image quality. Concealing confidential data by applying the proposed method increases the amount of confidential data concealed by up to 84.6% compared to the existing method. The proposed technique can be effectively used for commercial image watermarking that hides copyright information.