• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.42 no.6
• /
• pp.833-840
• /
• 1997

Differentiation and degeneration of spikelets in paddy rice has been studied in high yielding Indica$\times$Japonica hybrid cultivar, Milyang 23 and a Japonica type cultivar, Koshihikari. Germinated seeds planted in 5000$^{-1}$ a pots filled with submerged soil and cultured under natural conditions. The young panicles of main stem were continuously dissected and observered by Cryo-SEM from the panicle initiation stage, and investigated about formation position of the differentiation and degeneration spikelet within a panicle of 7 days after heading. The degeneration of spikelet appeared simultaneously throughout panicle just after closure of spikelet by the palea and lemma. Differentiated and degenerated spikelets per panicle were about 240, 80 for Milyang 23 and 87, 6 for Koshihikari, respectively. The spikelets degeneration in Milyang 23 was mainly on the secondary and tertiary branch which were developed from primary branch of middle-basal panicle node and hardly not the spikelets of primary branch, and degeneration rate of secondary and tertiary rachis branch and spikelets for Milyang 23 were 2.5 times greater than those of Koshihikari. The proper relation equation between total differentiation or normal spikelets number per panicle(Y) and each rachis branch number were different between cultivars, Le., Y=5.5X$_1$＋3.0X$_2$ for Koshihikari as previously proposed, but those of Milyang 23, Y=5.7X$_1$＋3.5X$_2$＋2.8X$_3$ for total differentiation spikelets and Y=5.6X$_1$＋3.2X$_2$＋2.4X$_3$ for normally developed spikelets, where X$_1$, X$_2$, X$_3$ are number of primary, secondary, tertiary rachis branch, respectively.

• Development and Reproduction
• /
• v.10 no.4
• /
• pp.247-254
• /
• 2006

It is well publicized that the existence of various endocrine disrupting chemicals threatens normal sexual development of many sedentary marine fishes in the coastal areas. However, a suitable marine fish species for efficient monitoring of this threatening has yet to be identified. One of the difficulties in estimating the effect of endocrine disruption in marine fish is the absence of clear distinction between testicular and ovarian structures at the early stages of sex differentiation. In search of a potential test species, we have investigated the microscopic structures of sexually undifferentiated and differentiated gonads and the susceptibility of gonadal differentiation to exogenous sex steroids during the sex differentiation period in a sedentary marine rockfish, Sebastes schlegeli. Male gonads in this species contained dark pigmentation that made them distinct from female gonads. Treatment either with $estradiol-17\;{\beta}(E_2)$ or $17\;{\alpha}-methyltestosterone$ (MT) significantly altered the sex ratios with the complete sex changes or the occurrence of ovotestis that was easily identified by the mixed structure of dimorphic gonads (coexistence of ovarian cavity/primary oocytes and dark pigmentation/seminiferous tubules). Results in this study suggest that S. schlegeli can be developed as a monitoring/test fish species for endocrine disruption in marine fish in the coastal areas.

• Korean Journal of Environmental Biology
• /
• v.27 no.1
• /
• pp.73-81
• /
• 2009

Population viability analysis of a Gold-spotted pond frog (Rana chosenica) population at Cheongwon-gun, Chungbuk, in South Korea was conducted and we proposed several suggestions for effective conservation and re-introduction of the species. Simulating a developed model over 1,000 times predicted that the population will exist over 30 years with a relatively low growth rate of 0.113, but with a high probability of extinction as 81.1%. Population growth and extinction probability were the most greatly depended on the rate of successful metamorphosis. In the case of outbreak of amphibian diseases such as Chytridiomycosis and Ranavirus, the population will be easily extinct within 4 years with 100% probability. In a habitat of which carrying capacity is 200, to successfully re-introduce an extinct population, it is initially needed to put 100 individuals of which 83% is males and its age structure is normal-distributed. If we additionally conducts artificial supplementation of 10% individuals every 2 years from 4 years to 10 years after initial reintroduction, the population will become a stable with 0.297 growth rate and 0.290 extinction rate. Our results are the first case of amphibian population viability analysis in Korea and could be used to develop effective conservation and re-introduction plans for endangered Gold-spotted pond frog.

• Restorative Dentistry and Endodontics
• /
• v.20 no.2
• /
• pp.432-461
• /
• 1995

The basic principles in the design of Class II amalgam cavity preparations have been modified but not changed in essence over the last 90 years. The early essential principle was "extension for prevention". Most of the modifications have served to reduce the extent of preparation and, thus, increase the conservation of sound tooth structure. A more recent concept relating to conservative Class II cavity preparations involves elimination of occlusal preparation if no carious lesion exists in this area. To evaluate the ideal ClassII cavity preparation design, if carious lesion exists only in the interproximal area, three cavity design conditions were studied: Rodda's conventional cavity, simple proximal box cavity and proximal box cavity with retention grooves. In this study, MO amalgam cavity was prepared on maxillary first premolar. Three dimensional finite element models were made by serial photographic method. Linear, eight and six-nodal, isoparametric brick elements were used for the three dimensional finite element model. The periodontal ligament and alveolar bone surrounding the tooth were excluded in these models. Three types model(B option, Gap option and R option model) were developed. B option model was assumed perfect bonding between the restoration and cavty wall. Gap option model(Gap distance: $2{\mu}m$) was assumed the possibility of play at the interface simulated the lack of real bonding between the amalgam and cavity wall (enamel and dentin). R option model was assumed non-connection between the restoration and cavty wall. A load of 500N was applied vertically at the first node from the lingual slope of the buccal cusp tip. This study analysed the displacement, 1 and 2 direction normal stress and strain with FEM software ABAQUS Version 5.2 and hardware IRIS 4D/310 VGX Work-station. The results were as followed. 1. Rodda's cavity form model showed greater amount of displacement with other two models. 2. The stress and strain were increased on the distal marginal ridge and buccopulpal line angle in Rodda's cavity form model. 3. The stress and strain were increased on the central groove and a part of distal marginal ridge in simple proximal box model and proximal box model with retention grooves. 4. With Gap option, Rodda's cavity form model showed the greatest amount of the stress on distal marginal ridge followed by proximal box model with retention grooves and simple proximal box model in descending order. 5. With Gap option, simple proximal box model showed greater amount of stress on the central groove with proximal box model with retention grooves. 6. Retention grooves in the proximal box played the role of supporting the restorations opposing to loads.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.2
• /
• pp.962-969
• /
• 2014

This study investigated the patterns and correlations of spinopelvic alignments in in middle school and high schools students of Gyeongnam areas in Korea using rasterstereography. Sixty-one subjects were recruited from May to October 2013, the average age of subjects was $16.40{\pm}2.20$ years. In the present results, PSIS ratio was statistically different between the sexes(male $21.15{\pm}2.40$%, female $23.41{\pm}3.28$%)(p<.01) and lordotic angle was statistically different between the sexes(male $33.44{\pm}8.46^{\circ}$, female $38.96{\pm}8.11^{\circ}$)(p<.001), but other parameters were not statistically different between the sexes. However, we verified that lordotic angle was significant correlation separately with pelvic tilt(r=.348), kyphotic angle(r=.609). Surface rotation was significant correlation separately with kyphotic angle(r=-.278), lordotic angle(r=-.256), trunk inclination(r=.493). These finding could be used as basic data research to confirm normal pattern of spinopelvic alignment and balance in health adolescents, and might help understand adolescents with structure problem in spine and pelvis.

• Journal of the Korea Institute of Building Construction
• /
• v.11 no.5
• /
• pp.426-434
• /
• 2011

Recently, the use of mineral admixtures in concrete has been studied in many laboratories, and been applied in the field. But the non-destructive testing equation proposed in Japan for normal strength concrete has been used to determine compressive strength, because there has been a lack of systematic research on the compressive strength of concrete using mineral admixtures. For this reason, it is essential to suggest a non-destructive testing equation to estimate the compressive strength of concrete using mineral admixtures. Therefore, this study made a cylindrical specimen and core tube specimen of concrete using a mineral admixture, and suggested a strength estimation of long-term age (4 years) through non-destructive and destructive tests. The results of the research are as follows. Comparing error rates between conventional suggested equations and this estimated equation shows some differences by age, but the error rate of this study was reduced to 0.3 %~115.0 % compared to conventional equations by re-bound hammering, 0.2 %~22.8 % by the ultrasound velocity method and 0.5 %~102.3 % by complex method. Accordingly, it is judged to be suitable for assessing the compressive strength of concretes using mineral admixtures.

• Journal of radiological science and technology
• /
• v.33 no.4
• /
• pp.369-378
• /
• 2010

The purpose of this study was to investigate image differences between KVCT vs MVCT depending on a high densities metal included in the phantom and to analyze the r values for the purpose of the dose differences between each methods. We verified the possibilities for clinical indications that using MVCT is available for the radiation therapy treatment planning. Cheese phantom was used to get a density table for each CT and CT sinogram data was transferred to radiation planning computer through DICOM_RT. Using this data, the treatment dose plan has been calculated in RTP system. We compared the differences of r values between calculated and measured values, and then applied this data to the real patient's treatment planning. The contrast of MVCT image was superior to KVCT. In KVCT, each pixel which has more than 3.0 of density was difficult to be differentiated, but in MVCT, more than 5.0 density of pixels were distinguished clearly. With the normal phantom, the percentage of the case which has less than 1($r\leq1$, acceptable criteria) of gamma value, was 94.92% for KVCT and 93.87% for MVCT. But with the cheese phantom, which has high density plug, the percentage was 88.25% for KVCT and 93.77% for MVCT respectively. MVCT has many advantages than KVCT. Especially, when the patient has high density metal, such as total hip arthroplasty, MVCT is more efficient to define the anatomical structure around the high density implants without any artifacts. MVCT helps to calculate the treatment dose more accurately.

• The Korean Journal of Mycology
• /
• v.38 no.2
• /
• pp.160-166
• /
• 2010

A homothallic filamentous fungus Aspergillus nidulans has been used as the a model organism for studying growth and development for eukaryotic system. Various studies about specific transcription factors have been performed for elucidating the molecular mechanisms of growth, asexual and sexual developmental processes. Among them, the fkhE gene (AN2025.3) is located in chromosome VII and contains an ORF encoding 718 amino acid polypeptide intervening with two short introns. The cDNA sequencing revealed that at least four types of alternative splicing events were occurred when the fkhE gene was transcribed. The putative FkhE polypeptide contains a conserved forkhead domain and a bipartite nuclear localization signal at it's N-terminus and C-terminus, respectively. Deletion of fkhE resulted in impaired conidiophore formation in a solid medium. However, the sexual developmental process or cleistothecia formation was normal. Furthermore, fkhE deletion mutant produced conidiophores and conidia under the submerged culture, indicating that the fkhE gene is involved in asexual developmental process similar to the fkhF gene.

• Korean Journal of Materials Research
• /
• v.30 no.7
• /
• pp.343-349
• /
• 2020

NKN [(Na,K)NbO₃] is a candidate lead-free piezoelectric material to replace PZT [Pb(Zr,Ti)O₃]. A single crystal has excellent piezoelectric-properties and its properties are dependent of the crystal orientation direction. However, it is hard to fabricate a single crystal with stoichiometrically stable composition due to volatilization of sodium during the growth process. To solve this problem, a solid solution composition is designed (Na,K)NbO₃-Ba(Cu,Nb)O₃ and solid state grain growth is studied for a sizable single crystal. Ceramic powders of (Na,K)NbO₃-M(Cu,Nb)O₃ (M = Ca, Sr, Ba) are synthesized and grain growth behavior is investigated for different temperatures and times. Average normal grain sizes of individual specimens, which are heat-treated at 1,125 ℃ for 10 h, are 6.9, 2.8, and 1.6 ㎛ for M = Ca, Sr, and Ba, respectively. Depending on M, the distortion of NKN structure can be altered. XRD results show that (NKN-CaCuN: shrunken orthorhombic; NKN-SrCuN: orthorhombic; NKN-BaCuN: cubic). For the sample heat-treated at 1,125 ℃ for 10 h, the maximum grain sizes of individual specimens are measured as 40, 5, and 4,000 ㎛ for M = Ca, Sr, and Ba, respectively. This abnormal grain size is related to the partial melting temperature (NKN-CaCuN: 960 ℃; NKN-SrCuN: 971 ℃; NKN-BaCuN: 945 ℃).

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2001.06a
• /
• pp.162-177
• /
• 2001

The hydrolysis rates of seven kinds of polyol ester base oils 〔POEs〕 of different branch shape were investigated by using a simple apparatus under mild acidic condition. Seven polyol ester base oils were made of poly hydric alcohols of two-four valence, normal or branched fatty acids of different carbon number. p-Toluene sulfonic acid was used as acid catalyst to accelerate the rate of hydrolysis. Partial esters and fatty acid produced by sequential hydrolysis of POEs were identified and their concentrations were determined by calibrated-internal standard method using Gas Chromatography. The rate constants of each step in sequential hydrolysis were determined by the least square method from rate equation and the concentration of each component, were compared with one another. It was shown that the rate of hydrolysis of POEs was strongly affected by whether molecular structure of fatty acid was straight chain or branch chain and which position was branched. The hydrolysis stability for all the POEs can be reasonably explained by using a steric hindrance effect anticipated fi:om their molecular structures affecting as water molecule makes an attack on the carbonyl carbon of POEs.