• International Journal of Highway Engineering
• /
• v.18 no.6
• /
• pp.87-96
• /
• 2016

OBJECTIVES : A fog generated field test was conducted to analyze the relationship between different sizes of variable speed limit signs and the legibility distance under various fog density conditions. By using this study, appropriate sizes of signs can be selected depending on the density of fog. METHODS : An actual tunnel was selected as the area for this test, as other places cannot maintain the fog condition because of rapid air current. A total 121 subjects were recruited for this test, which took place over the course of four days. The test on the first day was conducted under normal weather conditions for comparison. Visibility-distance detecting sensor was used to measure the visibility distance due to the fog density time, simultaneously with the evaluation of legibility distance by subjects. RESULTS : The test results show the relationship between the different sizes of signs and the legibility distance corresponding to the visibility distance due to both non-fog and fog generated conditions. According to the technical test results, appreciable amount of reduction in legibility distance due to fog was resulted in all sizes of signs. Moreover, the legibility distance is reduced proportionately with the decrease in the visibility distance due to fog. CONCLUSIONS : The results of this study can be used to select appropriate sizes of valuable speed signs under fog conditions. Hence, drivers can expect to have more room to respond to adverse weather conditions, thereby reducing the risk of accidents.

• Fashion & Textile Research Journal
• /
• v.15 no.3
• /
• pp.423-429
• /
• 2013

This study helps out-size consumers purchase tops and improve the fitness of unde-weight women in their 20s-30s and by the establishment of a size system. The criteria for subjects in this study were those under 18.5($kg/m^2$) of the BMI; subsequently, a total of 233 females were enrolled. The results were: First, the nominal size for female adult formal dress suggested by the KS standard is suggested in 20 sections. The sections for underweight women are 7, (34 women who accounted for 14.59% out of 233 in total). The cover efficiency was 2.08% (which was very low). Second, tests showed that the average difference between the reference part body size of 7 sections for underweight women in the normal size section of bust cir.- hip cir.- height, and KS standard, waist cir. among reference sizes was rather small in the case of a nominal size for long height. Therefore, there is a significant difference with size in the KS standard and a sizing system proven improper for underweight woman. Third, the basic body sizes and reference body sizes were different due to the size system establishment according to measurements of underweight subjects. The research findings suggest that it is necessary to understand underweight types according to bust girth and hip girth sizes that represent basic sizes as well as to design patterns that consider the underweight body shape characteristics when women's tops are designed.

• Journal of Fashion Business
• /
• v.11 no.4
• /
• pp.111-119
• /
• 2007

This research analyzes how female college students' perception of somatotype-self and their satisfactions with their somatotype-self affect their appearance-management behaviors. The result is as follows: 1)An analysis of subjects' physical characteristics revealed that the average figures of their body sizes were within the normal boundaries. The average Quetelet Index of the subjects, which determines obesity of adults, was slightly below the nationwide physical standard of Korea. 2)The subjects' satisfaction with their each body part shows that the women were unsatisfied with every body-part measurement; height, bust size, waist size, hips size and particularly weight. 3)While most of the respondents recognized that sizes of their body parts were average, they were not happy with their body sizes. 4)Three factors were recognized from the study of appearance-management behaviors of the subjects; we defined them as 'Appearance Management', 'Weight Management', and 'Satisfaction with one's Appearance.' The study showed that the fatter, the more a subject controlled her weight. 5)A correlation study between one's perception of her body and her appearance-management behavior found that the more obese a subject was, the harder the subject was controlling her weight.

• The Korean Journal of Applied Statistics
• /
• v.15 no.2
• /
• pp.297-310
• /
• 2002

Liang and Zeger proposed generalized estimating equations(GEE) for analyzing repeated data which is discrete or continuous. GEE model can be extended to model for repeated categorical data and its estimator has asymptotic multivariate normal distribution in large sample sizes. But GEE is based on large sample asymptotic theory. In this paper, we study the properties of GEE estimators for repeated ordinal data in small sample sizes. We generate ordinal repeated measurements for two groups using two methods. Through Monte Carlo simulation studies we investigate the empirical type 1 error rates, powers, relative efficiencies of the GEE estimators, the effect of unequal sample size of two groups, and the performance of variance estimators for polytomous ordinal response variables, especially in small sample sizes.

• Journal of Fashion Business
• /
• v.11 no.2
• /
• pp.155-171
• /
• 2007

This research aims to present the corresponding dimensions of China men's clothes on the basis of size specification of Korea men's suits. The results of this study, with the cooperation of Sejung Company exporting men's clothes to Ningbo City, Zhejiang Province in China, are as follows: 1. Based on the drop standard of KS K 0050, the body types of Chinese men in their 20s were classified. A body types were 55.77%, Y body types were 32.16%, B body types were 11.55% and BB body types were 1.51%. 2. According to the criteria of ready-made dimensions of normal body type suggested in Korea Standards, and in consideration of the basic distribution reality of body dimensions, representative 5 sizes were selected. 3. Research jackets by different sizes were produced and went through wearing tests. The means of 1st wearing test were 3.86, 4.09, 4.09, 3.57, and 3.69. The mean of 2nd wearing test of 88-73-170 size was 4.32. 4. The corresponding size specification of China men's clothes based on those of Korea men's suits were presented here, showing product sizes and physical items in detail.

• The Korean Journal of Community Living Science
• /
• v.19 no.3
• /
• pp.419-429
• /
• 2008

This study was conducted to analyze the characteristics of women's body somatotypes by direct measurements. Through the classification of degree of obesity and silhouette, women in their 20s who have a great interest in body somatotype can grasp their real somatotype and recognize their obesity rate and silhouette easily. The results are as follows: 1. Average sizes of subjects for this study were: height 160.3cm, weight 52.2kg, bust 83.7cm, waist 65.7cm, hips 91.1cm. And average values of each body mass index were: BMI 20.3, Rohrer Index 1.27, Vervaeck Index 84.8. 2. For the BMI value, the Average Numeric Index of normal somatotype was the highest, 76.9%. The Rohrer Index of underweight somatotype was 34.3% and the Average Numeric Index was 1.12. In the Vervaeck Index, underweight somatotype was 35.7%, and the average Numeric Index was 79.1, while the overweight somatotype was 7.4% of the Vervaeck Index and 100.8 of the Average Numeric Index. So the index which had the largest range of normal values from the same subjects, was the BMI, then the Rohrer Index, and finally, the Vervaeck Index in that order. 3. In the result of sorting bodies with silhouettes, when drop value were used to sort, N type (normal somatotype) was 69.4%, H type (one has similar sizes in waist size and hips) was 20.4% and A type (one has big hips) was 10.2% in that order. Among people in their early 20s, A type was 12.1%. H type was high, 22.8%, among women in their late 20s. When Sinozaki's method of classifying body types was used, ideal somatotype was 86.6%, A type was 7.4%, I type was 5.6% and X type was 0.5%. Women in their late 20s showed higher rates of ideal somatotype, the rates of A type and I type were lower than women in their early 20s.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.9 no.4
• /
• pp.552-560
• /
• 1997

Analysis is performed to determine the optimal lengths or cross-sectional areas of refrigerator-cooled current leads that can be applied to the conduction-cooled superconducting systems. The binary current lead is composed of the series combination of a normal metal at the upper(warm) part and a high $T_c$ superconductor(HTS) at the lower(cold) part. The heat conduction toward the cold end of HTS part constitutes a major refrigeration load. In addition, the joint between the parts should be cooled by a refrigerator in order to reduce the load at the low end and maintain the HTS part in a superconducting state. The sum of the work inputs required for the two refrigeration loads needs to be minimized for an optimal operation. In this design, three simple models that depict the refrigeration performance as functions of cooling temperature are developed based on some of the existing refrigerators. By solving one-dimensional conduction equation that take into account the temperature-dependent properties of the materials, the refrigeration works are numerically calculated for various values of the joint temperature and the sizes of two parts. The results show that for given size of HTS, there exist the optimal values for the joint temperature and the size of the normal metal. It is also found that the refrigeration work decreases as the length of HTS increases and that the optimal size of normal metal is quite independent of the size of HTS. For a given length of HTS, there is an optimal cross-sectional area and it increases as the length increases. The dependence of the optimal sizes on the refrigerator models employed are presented for 1kA leads.

• The Korean Journal of Applied Statistics
• /
• v.2 no.1
• /
• pp.18-34
• /
• 1989

The problem of simultaneously estimating the pairwise differences of means of four independent normal populations with equal variances is considered. A statistical computing procedure involving a trivariate t density constructs the exact confidence intervals with simultaneous co verage probability equal to $1-\alpha$. For equal sample sizes, the new procedure is the same as the Tukey studentized range procedure. With unequal sample sizes, in the sense of efficiency for confidence interval lengths and experimentwise error rates, the procedure is superior to the various generalized Tukey procedures.

• Journal of the Korean Home Economics Association
• /
• v.18 no.1
• /
• pp.1-13
• /
• 1980

The purpose of the study was to determine a somatotype of korean women which was needed to establish the nominal sizes for the women ready-to-wear garments. Body measurements were taken from 448 women living in the areas of seoul, Taejeon, and Jinjam. the ages of the subjects were between 20 to 59. Twenty-three items were measured from each subject for the analysis. the independent variables in the study were age and occupation. the results of the study were as follow : 1) Most of the body measurements were significantly different among the age groups. 2) Most of the measurements were significantly different among the sample groups when categorized by their jobs. 3) The ratio of depth to width measurements increased as the age increased, resulting changes I body contour. 4) The number of the "normal figure" decreased as the age increased.increased.

• Journal of the Korean Home Economics Association
• /
• v.20 no.3
• /
• pp.25-34
• /
• 1982

The manufacture of children's wear is another part of the giant industry. However, the production of children's wear remains a small factory operation without scientific study. This study is aimed at establishing the normal sizes for slacks pattern making of 6∼8 years old children. The sample were classified into 5 groups of stature. The findings are as follows: 1) In analysis of stature group 110∼115cm to 130∼135cm there were almost significant differences of the mean values of all items. Comparison of physique shows even variation between stature group. 2) The correlation among all the parts of the body is strong in the case of the Stature. 3) The result of regression analysis is as follows. In slacks pattern making Back Waist Height and Slacks Length were exactly determined by Stature. Waist to Knee were exactly determined by Slacks Length.