• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 하계종합학술대회 논문집
• /
• pp.627-630
• /
• 1999

For depth extraction from the focus and recovery the shape, determination of criterion function for focus measure and size of the criterion window are very important. However, Texture, illumination, and magnification have an effect on focus measure. For that reason, depth map has a partial high and low peak. In this paper, we propose a depth extraction method from focused images using the error interpolation. This method is modified the error depth into mean value between two normal depth in order to improve the depth map.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.302-307
• /
• 2004

The major flow-induced vibration mechanisms such as fluid-elastic and turbulence excitation can cause the various types of wear of the steam generator tubes in unclear power plant. It is generally accepted that the tube wear due to vibration is affected by the presence of gap clearance between tube and support plate. Connors showed that the tube wear depth could be estimated by using the relationship between wear volume and sliding distance for contact time. Au-Yang predicted the wear depth by using the nonlinear characteristics of normal work rate to contact time. In this study the effect of gap size on the steam generator tubes wear is analyzed by deriving the wear depth versus normal work rate relationship from these previous results.

• 한국실내디자인학회:학술대회논문집
• /
• 한국실내디자인학회 2007년도 춘계학술대회 논문집
• /
• pp.81-84
• /
• 2007

The purpose of this study was to grasp actual condition of remodeling elements by specialists' in-depth interviews. The interview has been conducted to interior designer who have a wide experience of apartment remodeling. In-depth interview is a kind of qualitative method in which attention to reply of responses with open-access between interviewer and respondents. According to the results, remodeling elements were generally the renovation of balcony into the livingroom or children room, removal a doorsill, installation of storage furniture, change of lighting fixtures in the all rooms and change equipments of bathroom. Finishing materials were usual used normal wallpaper and normal or low emitting adhesive on ceiling and wall, tempered-flooring on floor, and ceramic tiles on bottom and wall of bath and entrance.

• 한국멀티미디어학회논문지
• /
• 제18권2호
• /
• pp.106-112
• /
• 2015

In this paper, we propose a method for correction of perspective distortion on a taken image. An image taken by a camera is caused perspective distortion depending on the direction of the camera when objects are projected onto the image. The proposed method in this paper is to obtain the normal vector of the plane through the depth information using a depth camera and calculate the direction of the camera based on this normal vector. Then the method corrects the perspective distortion to the view taken from the front side by performing a rotation transformation on the image according to the direction of the camera. Through the proposed method, it is possible to increase the processing speed than the conventional method such as correction of perspective distortion based on color information.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.1032-1037
• /
• 2006

This thesis studied effects of the excavation around railroads on the deformation of the lateral ground and neighboring railroads. The conclusions of the study are as follows. 1. When the depth of excavationis 10m, the influential area should be 35m for soft clay, 20m for normal clay, 15m for hard clay, 15m for loose sand, 12m for slightly dense sand, and 8m for dense sand. 2. When the influential area is 10m, the allowable excavation depth should be 2.5m for soft clay, 4.8m for normal clay, 7.5m for hard clay, 7.2m for loose sand, 8.8m for slightly dense sand, and 10m for dense sand. 3. When the influential area is 20m, the allowable excavation depth should be 4.5m for soft clay, and up to 10m for the other five kinds of soil. 4. When the influential area is 30m, the allowable excavation depth should be 7.5m for soft clay, and up to 10m for the other five kinds of soil. 5. When the influential area is 35m, the allowable excavation depth should be up to 10m for all kinds of soil.

• 한국응급구조학회지
• /
• 제16권2호
• /
• pp.67-74
• /
• 2012

Purpose : The purpose of this study is to get basal user guidelines of safer bag-valve-mask application on patient with normal pulmonary patho-physiologic condition. Methods : This study was accomplished by pre-qualified 25 EMS junior grade students. Participants were instructed randomly compress bag to one-third, half and total and also with differesnt compression speed. Resultant tidal volumes and mean airway pressures obtained in RespiTrainer were analysed in relation to the each compression depth and rate. Results : Demographic difference does not affect tidal volume with any compression depth and rate change. Increasing compression depth is correlated with tidal volume increasement at any compression rate and also with mean airway pressure. If the compression depth is same, compression rate change did not affect significantly the resultant tidal volume or mean airway pressure. Conclusion : Hand size, Experience, BMI dose not affect tidal volume. Compress the 1600 ml bag half to total amount is safe way to offer sufficient tidal volume without risky high airway pressure delivery to patient airway who with normal lung patho-physiologic condition.

• 한국컴퓨터정보학회논문지
• /
• 제22권2호
• /
• pp.105-110
• /
• 2017

We propose a effectiveness of the assistant pad during cardiopulmonary resuscitation and provide basic data for high quality cardiopulmonary resuscitation. The subjects of the study were 28 students in the emergency department who completed the BLS Health Care-Provider under the experimental study by the randomized crossover design. Data were analyzed by using SPSS 20.0 Version. The results of this study showed that chest compressions using assistant pads decreased pain and fatigue than normal chest compressions, and the depth of chest compressions was deeper than normal depth. The results of this study shows that the use of assistant pads between the one hand and the other hand during cardiopulmonary resuscitation may increase accuracy and depth were improved. Therefore intensive indicator also improved. However, with regard to the use of assistant pads, further studies will be needed to identify the potential for clinical use.

• 치과방사선
• /
• 제3권1호
• /
• pp.29-34
• /
• 1973

The study was made on the facial profile of the normal Korean adults using the roentgenographic cephalograms. The subjects ccnsisted of 50 males and 50 females with the normal occlusion. The measurements were made of the facial angles in skeletal pattern and depth, height and the length in the soft tissue profile. The mean and standard deviations from the subjects were calculated and compared with the samples of male and female. The authors have drawn the conclusions as follows: 1. Compared with the angulation in skeletal patterns, there were no differences between both sexes. 2. Individual variations of the lower face were larger than the upper face in most measuring points. 3. Generally, facial heights were lesser than facial depth in sexual differences. 4. Most dimensions of the facial depth, height and length of the male were larger than those of female.

• 한국주조공학회지
• /
• 제9권3호
• /
• pp.221-227
• /
• 1989

The effect of sulfur content and inoculant on solidification microstructure and mechanical properties of gray cast iron have been investigated. The main results obtained are as follows, 1. In the FeSi3Ca1Ba inoculated irons, with the variation of sulfur content, low sulfur levels (${\sim}0.03%$) yield low chill depth, high tensile strength, good wear resistance and type A graphite with a pearlite matrix. High sulfur levels( >0.08%) provide high chill depth, low mechanical proper ties and type D graphite with small amount ferrite. 2. In case of inoculant variation with normal FeSi, FeSi3Ca1Ba, 30CaSi and uninoculation at 0.03%S level, lower chill depth and higher tensile strength was obtained in the order ; 30CaSi, FeSi3Ca1Ba normal FeSi, uninoculation.

• 대한치과교정학회지
• /
• 제15권2호
• /
• pp.279-289
• /
• 1985

This study was undertaken to find out the factor highly correlated to the depth of overbite among the skeletal factors of the craniofacial complex using lateral roentgenocephalograms. The subjects cconsited of fifty normal occlusions, sixty Class I malocclusions, sixty Class II division I malocclustions and sixty Class III malocclusions. The results were as follows: 1. Ans-Go-Me angle and lower genial angle showed high correlation to the depth of overbite in the total malocclusion sample. 2. The mean values of Ans-Go-Me angle and lower goinal angle for the normal sample were $49.8^{\circ}\;and\;75.6^{\circ}$, respectively. 3. Ans-Go-Me angle above $56^{\circ}$ or lower gonial angle above $84^{\circ}$ indicated a tendency toward an openbite. Conversely, Ans-Go-Me angle below $48^{\circ}$ or lower goinal angle below $73^{\circ}$ indicated a tendency toward a deepbite.