• Macromolecular Research
• /
• 제14권4호
• /
• pp.424-429
• /
• 2006

The synthesis of a series of poly(POSS-NBE-b-MTD) copolymers was successfully accomplished, taking advantage of sequential, ring-opening, metathesis block copolymerization using $RuCl_2(=CHPh)(PCy_3)_2$ catalyst. By using cyclopentyl-POSS-norbornene (POSS-NBE) monomer as the first block in the block copolymer, living poly(POSS-NBE) with controlled molecular weight and narrow molecular weight distribution was produced. Then, poly(POSS-NBE-b-MTD) copolymers were successfully prepared, in which sequential monomer addition of methyltetracyclododecene (MTD) to the living poly(POSS-NBE) chain ends was utilized to achieve quantitative crossover efficiency. Characterization by $^1H$ NMR spectroscopy and GPC confirmed the high definition and structural integrity of the poly(PO$S-NBE-b-MTD) copolymers. Thermal properties-and morphologies of the POSS-containing block copolymer nanocomposites were also investigated by using thermogravimetric analysis (TGA), transmission electron microscopy (TEM), and wide-angle X-ray scattering (WAXS).

• 폴리머
• /
• 제24권6호
• /
• pp.751-756
• /
• 2000

rac-Et(Ind)$_2$ZrC1$_2$/MMAO계를 사용한 에틸렌(E)과 시클로올레핀 (CO)의 공중합에서 CO의 구조가 촉매 활성 및 공중합체 (COC)의 구조와 성질 등에 미치는 영향을 조사하였다. 즉, 노르보르넨 (N), 페닐기 또는 비닐기가 치환된 형태인 5-페닐-2-노르보르넨 (PN) 및 5-비닐-2-노르보르넨 (VN)을 사용하여 [CO]/[E] 농도비에 따른 촉매 활성 및 공중합체의 성질을 조사하였다. [CO]/[E] 공급비가 증가함에 따라 COC에 대한 촉매 활성은 감소하였고, $T_{g}$ 는 증가하는 일반적인 경향을 보였으나, 그 변화 정도는 CO의 종류에 따라 달랐다. E와 VN의 공중합체 구조를 FT-IR과 $^{13}$C-NMR로 조사한 결과, VN에 존재하는 고리내의 C=C 이중결합이 중합에 관여하고 비닐기의 C=C 이중결합은 그대로 남아있는 것을 확인하였다. 그리고 공중합체 내에 존재하는 비닐기의 C=C 이중결합에 글리시딜메타크릴레이트를 graft하여 공중합체를 기능화하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.1028-1029
• /
• 2003

The copolymerization of ethylene and norbornene was carried out with ansa-metallocene and modified methylaluminoxane (MMAO) cocatalyst. The copolymerization behavior was changed with the structure of metallocene catalysts. In addition the catalyst activity was dependent on the structure of MMAO, i.e.. MMAO-4 which contains less i-butyl group compared to MMAO-3A exhibited higher catalyst activity than MMAO-3A. The glass transition temperature and the composition of the produced copolymer were not affected by MMAO type.

• 폴리머
• /
• 제28권3호
• /
• pp.245-252
• /
• 2004

5-헥실-2-노보넨 (HNB)과 5-메틸에스터-2-노보넨 (MES-NB)을 양이온 ${\eta}^3$-알릴 팔라듐 촉매인 [(${\eta}^3$-allyl) palladium(tricyclohexylphosphine) trifluoroacetate]와 리튬계 조촉매 [lithium tetrakis(pentafluorophenyl( borate${\cdor}$2.5etherate]를 사용하여 비닐 부가형의 폴리노보넨 공중합체를 합성하였다. 에스터기를 과량 함유한 폴리노보넨을 제조하기 위한 최적 중합 조건을 조사하기 위하여 여러가지 중합조건에 따른 분자량변화와 수율의 변화를 알아보았다. 팔라듐 촉매의 함량이 많을수록 수득율은 증가하는 한편, 분자량은 감소하였으며, 리튬조촉매의 함량은 많을수록 분자량과 수득율이 동시에 증가하였다. 사슬이동체를 이용하여 분자량을 조절할 수 있었고, 사슬이동제의 길이가 긴 1-데센과 1-옥텐이 1-헥센보다 분자량을 더 감소시키는 역할을 하였다. 한편 사슬이동제의 양은 수율에 큰 영향을 미치지 않았다. HNB/MES-NB(투입비 40/60 mol%)의 공종합체의 $^1$H-NMR 과 GPC 분석으로부터, 실제 에스터 함유량으 약 25mol%인 고분자량 (M$_{w}$ : 270,000)의 폴리노보넨 공중합체가 얻어짐을 알 수 있었다.

• Macromolecular Research
• /
• 제11권4호
• /
• pp.231-235
• /
• 2003

Phase behavior information is necessary for accomplishing homogeneous copolymerization to obtain high yield of copolymers and prevent a fouling problem. Cloud-point data to $160^{\circ}C$ and 1,450 bar are presented for five $C_6$ hydrocarbon solvents, normal hexane, 2,2-dimethyl butane, 2,3-dimethyl butane, 2-methyl pentane, and 3-methyl pentane, with poly(ethylene-co-53 mol% norbornene) ($PEN_{53}$). The pressure-concentration isotherms measured for $PEN_{53}$/n-hexane have maximums that range between 5 and 12 wt% $PEN_{53}$. The cloud-point curves for $PEN_{53}$ all have negative slopes that decrease in pressure with temperatures. The single-phase region of $PEN_{53}$ in n-hexane is larger than the regions in 2,2-dimethyl butane, 2,3-dimethyl butane, 2-methyl pentane, and 3-methyl pentane. The cloud-point curve of $PEN_{53}$ in 2,2-dimethyl butane is located at higher temperatures and pressures than the curve in 2,3-dimethyl butane due to the reduced dispersion interactions with and limited access of 2,2-dimethyl butane to the copolymer. Similar cloud-point behavior is observed for $PEN_{53}$ in 2-methyl pentane and 3-methyl pentane.

• Macromolecular Research
• /
• 제17권12호
• /
• pp.995-1002
• /
• 2009

Luminescent polynorbornene (PNB)/quantum dot (CdSe@ZnS; QD) composite nanorods and nanotubes were successfully prepared using anodic aluminum oxide (AAO) membranes of various pore sizes as templates. To protect QDs with high quantum yield from quenching during the phosphoric acid treatment used to remove the AAO templates, chemically stable and optically clear norbornene-maleic anhydride copolymers (P(NB-r-MA)) were employed as a capping agent for QDs. The amine-terminated QDs reacted with maleic anhydride moieties in P(NB-r-MA) to form PNB-grafted QDs. The chemical- and photo-stability of QDs encapsulated with PNB copolymers were investigated by photoluminescence (PL) spectroscopy. By varying the pore size of the AAO templates from 40 to 380 urn, PNB/QD composite nanorods or nanotubes were obtained with a good dispersion of QDs in the PNB matrix.

• 폴리머
• /
• 제24권4호
• /
• pp.445-452
• /
• 2000

다양한 종류의 메탈로센 촉매와 공촉매인 개질-MAO (MMAO)을 이용한 에틸렌 (E)과 노르보르넨 (N)의 공중합에서 중합조건이 촉매 활성 및 공중합체의 구조와 성질 등에 미치는 영향을 조사하였다. 즉 $C_2$-대칭구조를 가지는 rac-Et(Ind)$_2$ZrC $l_2$, $M_2$Si(Ind)$_2$ZrC $l_2$, M $e_2$Si-(Cp)$_2$ZrC $l_2$ 및 $C_{s}$-대칭구조를 가지는 iPr(FluCp)ZrC $l_2$, 그리고 constrained geometry catalyst (CGC)와 이중다리 (di-bridged) 지르코노센 둥의 다양한 메탈로센 촉매를 사용하여 [N]/[E] 공급비에 따른 촉매 활성, 공중합체 (COC)의 열적 성질 및 N 함량을 조사하였다. rac-Et(Ind)$_2$ZrC $l_2$를 촉매로 사용한 경우에 공촉매의 몰비, 중합 온도 및 공촉매 종류 등의 중합조건을 조사한 결과 [Al]/[Zr]=3000, 4$0^{\circ}C$, MMAO 공촉매 등이 적합하였다. [N]/[E] 공급비가 증가됨에 따라 COC내의 N 함량이 증가하는 일반적인 경향을 보였으나, 촉매 활성은 사용된 메탈로센 촉매의 구조에 따라 달랐다. 즉 [N]/[E]가 증가할수록 $C_2$-대칭구조의 촉매 활성은 감소하였으나 $C_{s}$-대칭구조의 경우에는 증가하였다. 촉매활성과 N함량 등을 고려해 보면 rac-Et(Ind)$_2$ZrC $l_2$/MMAO계에서 비교적 높은 촉매 활성과 COC의 $T_{g}$제어가 용이한 결과를 얻을 수 있었다. 촉매종류에 따른 단량체의 반응성비를 Helen-Tudos 방법으로 구하였다.하였다.

• Macromolecular Research
• /
• 제15권5호
• /
• pp.430-436
• /
• 2007

The dinuclear half-sandwich CGCs (constrained geometry catalyst) with a polymethylene bridge, $[Ti({\eta}^5 : {\eta}^1-indenyl)SiMe_2NCMe_3]_2(CH_2)_n]$[n = 6 (1) and 12 (2)], have been employed in the copolymerization of ethylene and norbornene (NBE). To compare the mononuclear metallocene catalysts; $Ti({\eta}^5 : {\eta}^1-2-hexylindenyl)SiMe_2NCMe_3$ (3), $(Cp^* SiMe_2NCMe_3)$Ti (Dow CGC) (4) and ansa-$Et(Ind)_2ZrCI_2$ (5), were also studied for the copolymerization of ethylene and NBE. It was found that the activity increased in the order: 1 < 2 < 3 < 5 < 4, indicating that the presence of the bridge between two the CGC units contributed to depressing the polymerization activity of the CGCs. This result strongly suggests that the implication of steric disturbance due to the presence of the bridge may playa significant role in slowing the activity. Dinuclear CGCs have been found to be very efficient for the incorporation of NBE onto the polyethylene backbone. The NBE contents in the copolymers formed ranged from 10 to 42%, depending on the polymerization conditions. Strong chemical shifts were observed at ${\delta}$42.0 and 47.8 of the isotactic alternating NBE sequences, NENEN, in the copolymers with high NBE contents. In addition, a resonance at 47.1 ppm for the sequences of the isolated NBE, EENEE, was observed in the $^{13}C-NMR$ spectra of the copolymers with low NBE contents. The absence of signals for isotactic dyad at 48.1 and 49.1 ppm illustrated there were no isotactic or microblock (NBE-NBE) sequences in the copolymers. This result indicated that the dinuclear CGCs were effective for making randomly distributed ethylene-NBE copolymers.

• Bulletin of the Korean Chemical Society
• /
• 제23권7호
• /
• pp.957-963
• /
• 2002

We successfully synthesized the addition-type polynorbonenes (PNB) exhibiting photochromic properties and excellent thermal stability. Three norbornene-based monomers with different azobenzene moiety (R=NO2, H,OCH3) were synthesized by transesterification method. The corresponding PNB copolymers were synthesized by transition metal-catalyzed addition polymerization method, and characterized by GPC, UV-Vis spectroscopy, NMR, and thermal analysis. For comparison of the photochromic properties depending on the rigidity of polymer backbone, we prepared the polymethylmethacrylate (PMMA) copolymer with the corresponding azobenzene moiety. We investigated the photoisomerization behavior by means of optical muitichannel analyzer with Xe lamp as well as real-time UV-Vis spectroscopy with high-pressure mercury lamp. Among three PNB copolymers, a polymer with azobenzene (R=H) was the most adaptable for observation of photoisomerization behavior. It was found that the rate of photoisomerization and relaxation depended on the structure of azobenzene chromophore, rather than that of polymer backbone.

• Macromolecular Research
• /
• 제16권2호
• /
• pp.155-162
• /
• 2008

We report the successful synthesis of poly(NBECOOH-b-NBEPOSS) copolymers, taking advantage of the sequential, living ring opening metathesis polymerization of NBETMS and NBEPOSS using the $RuCl_2(=CHPh)(PCY_3)_2$/$CH_2Cl_2$/$20^{\circ}C$ system, followed by the hydrolysis of trimethylsilyl groups in poly(NBETMS-b-NBEPOSS) copolymers. The living behavior of ROMP of NBETMS was first investigated using two diagnostic plots, a first order kinetic plot and a $\bar{M}_n$ vs. conversion plot. The plots confirmed that no termination and chain transfer reaction had occurred during polymerization. Poly(NBECOOH-b-NBEPOSS) copolymers were prepared using the sequential monomer addition of NBEPOSS to living poly(NBETMS) chain ends, followed by the hydrolysis of trimethylsilyl groups in the poly(NBETMS-b-NBEPOSS) copolymers. The high structural integrity of poly(NBE-COOH-b-NBEPOSS) copolymers was confirmed by $^1H$-NMR, $^{13}C$-NMR spcctroscopy and GPC.