• Macromolecular Research
• /
• v.14 no.4
• /
• pp.424-429
• /
• 2006

The synthesis of a series of poly(POSS-NBE-b-MTD) copolymers was successfully accomplished, taking advantage of sequential, ring-opening, metathesis block copolymerization using $RuCl_2(=CHPh)(PCy_3)_2$ catalyst. By using cyclopentyl-POSS-norbornene (POSS-NBE) monomer as the first block in the block copolymer, living poly(POSS-NBE) with controlled molecular weight and narrow molecular weight distribution was produced. Then, poly(POSS-NBE-b-MTD) copolymers were successfully prepared, in which sequential monomer addition of methyltetracyclododecene (MTD) to the living poly(POSS-NBE) chain ends was utilized to achieve quantitative crossover efficiency. Characterization by $^1H$ NMR spectroscopy and GPC confirmed the high definition and structural integrity of the poly(PO$S-NBE-b-MTD) copolymers. Thermal properties-and morphologies of the POSS-containing block copolymer nanocomposites were also investigated by using thermogravimetric analysis (TGA), transmission electron microscopy (TEM), and wide-angle X-ray scattering (WAXS).

• Polymer(Korea)
• /
• v.24 no.6
• /
• pp.751-756
• /
• 2000

The copolymerization of ethylene (E) and cycloolefin (CO) was carried out with rac-Et(Ind)$_2$ZrC $l_2$ and MMAO cocatalyst system to examine the effect of CO structure on catalytic behaviors and properties of copolymer (COC). Various cycloolefins such as norbornene (N), 5-phenyl-2-norbornene (PN) and 5-vinyl-2-norbornene (VN) were used as comonomers. With increasing [CO]/[E] feed ratio, the catalytic activity decreased while the glass transition temperature of copolymer increased. With analysis of the structure of E/VN copolymer by FT-IR and $^{l3}$C-NMR, it was found that the cyclic C=C bond of VN comonomer is selectively polymerized and the vinyl C=C bond remains unreacted. The resulting vinyl C=C bond attached into copolymer provided the functionalization moiety using glycidyl methacrylate.e.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.1028-1029
• /
• 2003

The copolymerization of ethylene and norbornene was carried out with ansa-metallocene and modified methylaluminoxane (MMAO) cocatalyst. The copolymerization behavior was changed with the structure of metallocene catalysts. In addition the catalyst activity was dependent on the structure of MMAO, i.e.. MMAO-4 which contains less i-butyl group compared to MMAO-3A exhibited higher catalyst activity than MMAO-3A. The glass transition temperature and the composition of the produced copolymer were not affected by MMAO type.

• Polymer(Korea)
• /
• v.28 no.3
• /
• pp.245-252
• /
• 2004

We synthesized the vinyl addition-type polynorbomene copolymers using two monomers [5-hexyl-2-norbornene (HNB) and 5-methyleste-2-norbornene(MES-NB)] by means of a cationic ${\eta}^3$-allyl palladium catalyst system{[(${\eta}^3$-allyl)palladium(tricyclohexylphosphine) trifluoroacetate] and [lithium tetrakis(pentafluorophenyl) borate ${\cdot}$2.5 etherate]}. The molecular weights and yields of copolynorbomenes polymerized in various conditions were measured to investigate an optimum polymerization conditions to obtain highly ester-functionalized polynorbomenes. As a Pd catalyst content increased, the molecular weights (Mw) of polymers decreased while polymer yields increased. Also, as a Li cocatalyst content increased, the Mw’s and yields of polymers increased at the same time. The Mw’s of copolymers were also controlled by chain transfer agents such as 1-hexone, 1-octene and 1-decene, and we found that longer 1-decene and 1-octene were more efficient to reduce the Mw’s of polynorbornenes than 1-hexene. On the other hand, the content of chain transfer agents did not give influence significantly on polymer yields. From the $^1$H-NMR and GPC analysis of HNB/MES-NB(feed ratio of 40/60 mol%) copolymer, we found that this copolymer had an about 25 mol% of ester portion and a high molecular weight of 270,000.

• Macromolecular Research
• /
• v.11 no.4
• /
• pp.231-235
• /
• 2003

Phase behavior information is necessary for accomplishing homogeneous copolymerization to obtain high yield of copolymers and prevent a fouling problem. Cloud-point data to $160^{\circ}C$ and 1,450 bar are presented for five $C_6$ hydrocarbon solvents, normal hexane, 2,2-dimethyl butane, 2,3-dimethyl butane, 2-methyl pentane, and 3-methyl pentane, with poly(ethylene-co-53 mol% norbornene) ($PEN_{53}$). The pressure-concentration isotherms measured for $PEN_{53}$/n-hexane have maximums that range between 5 and 12 wt% $PEN_{53}$. The cloud-point curves for $PEN_{53}$ all have negative slopes that decrease in pressure with temperatures. The single-phase region of $PEN_{53}$ in n-hexane is larger than the regions in 2,2-dimethyl butane, 2,3-dimethyl butane, 2-methyl pentane, and 3-methyl pentane. The cloud-point curve of $PEN_{53}$ in 2,2-dimethyl butane is located at higher temperatures and pressures than the curve in 2,3-dimethyl butane due to the reduced dispersion interactions with and limited access of 2,2-dimethyl butane to the copolymer. Similar cloud-point behavior is observed for $PEN_{53}$ in 2-methyl pentane and 3-methyl pentane.

• Macromolecular Research
• /
• v.17 no.12
• /
• pp.995-1002
• /
• 2009

Luminescent polynorbornene (PNB)/quantum dot (CdSe@ZnS; QD) composite nanorods and nanotubes were successfully prepared using anodic aluminum oxide (AAO) membranes of various pore sizes as templates. To protect QDs with high quantum yield from quenching during the phosphoric acid treatment used to remove the AAO templates, chemically stable and optically clear norbornene-maleic anhydride copolymers (P(NB-r-MA)) were employed as a capping agent for QDs. The amine-terminated QDs reacted with maleic anhydride moieties in P(NB-r-MA) to form PNB-grafted QDs. The chemical- and photo-stability of QDs encapsulated with PNB copolymers were investigated by photoluminescence (PL) spectroscopy. By varying the pore size of the AAO templates from 40 to 380 urn, PNB/QD composite nanorods or nanotubes were obtained with a good dispersion of QDs in the PNB matrix.

• Polymer(Korea)
• /
• v.24 no.4
• /
• pp.445-452
• /
• 2000

The copolymerization of ethylene (E) and norbornene (N) was examined by using various metallocene catalysts and modified-MAO(MMAO) cocatalyst. For $C_2$-symmetry catalysts such as rac-Et(Ind)$_2$ZrC $l_2$, M $e_2$Si(Ind)$_2$ZrC $l_2$, M $e_2$Si(Cp)$_2$ZrC $l_2$ and Cs-symmetrical iPr(FluCp)ZrC $l_2$ as well as CGC and di-bridged zirconocene, the effects of catalyst structure and [N]/[E] feed ratio on catalyst activity, thermal property and [N] content of copolymer (COC) was investigated. For rac-Et(Ind)$_2$ZrC $l_2$ catalyst of a constant [N]/[E] feed ratio, the appropriate conditions of [Al]/[Zr] mole ratio, polymerization temperature and cocatalyst structure were found to be 3000, 4$0^{\circ}C$, MMAO cocatalyst, respectively. As [N]/[E] feed ratio increased, the incorporation of norbornene to copolymer increased while, the activity of catalyst decreased except for iPr(FluCp)ZrC $l_2$ With consideration of catalyst activity as well as N content, it was found that rac-Et(Ind)$_2$ZrC $l_2$/MMAO system exhibited relatively high activity and controllable $T_{g}$. Monomer reactivity ratio was determined by Kelen-Tudos method..

• Macromolecular Research
• /
• v.15 no.5
• /
• pp.430-436
• /
• 2007

The dinuclear half-sandwich CGCs (constrained geometry catalyst) with a polymethylene bridge, $[Ti({\eta}^5 : {\eta}^1-indenyl)SiMe_2NCMe_3]_2(CH_2)_n]$[n = 6 (1) and 12 (2)], have been employed in the copolymerization of ethylene and norbornene (NBE). To compare the mononuclear metallocene catalysts; $Ti({\eta}^5 : {\eta}^1-2-hexylindenyl)SiMe_2NCMe_3$ (3), $(Cp^* SiMe_2NCMe_3)$Ti (Dow CGC) (4) and ansa-$Et(Ind)_2ZrCI_2$ (5), were also studied for the copolymerization of ethylene and NBE. It was found that the activity increased in the order: 1 < 2 < 3 < 5 < 4, indicating that the presence of the bridge between two the CGC units contributed to depressing the polymerization activity of the CGCs. This result strongly suggests that the implication of steric disturbance due to the presence of the bridge may playa significant role in slowing the activity. Dinuclear CGCs have been found to be very efficient for the incorporation of NBE onto the polyethylene backbone. The NBE contents in the copolymers formed ranged from 10 to 42%, depending on the polymerization conditions. Strong chemical shifts were observed at ${\delta}$42.0 and 47.8 of the isotactic alternating NBE sequences, NENEN, in the copolymers with high NBE contents. In addition, a resonance at 47.1 ppm for the sequences of the isolated NBE, EENEE, was observed in the $^{13}C-NMR$ spectra of the copolymers with low NBE contents. The absence of signals for isotactic dyad at 48.1 and 49.1 ppm illustrated there were no isotactic or microblock (NBE-NBE) sequences in the copolymers. This result indicated that the dinuclear CGCs were effective for making randomly distributed ethylene-NBE copolymers.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.7
• /
• pp.957-963
• /
• 2002

We successfully synthesized the addition-type polynorbonenes (PNB) exhibiting photochromic properties and excellent thermal stability. Three norbornene-based monomers with different azobenzene moiety (R=NO2, H,OCH3) were synthesized by transesterification method. The corresponding PNB copolymers were synthesized by transition metal-catalyzed addition polymerization method, and characterized by GPC, UV-Vis spectroscopy, NMR, and thermal analysis. For comparison of the photochromic properties depending on the rigidity of polymer backbone, we prepared the polymethylmethacrylate (PMMA) copolymer with the corresponding azobenzene moiety. We investigated the photoisomerization behavior by means of optical muitichannel analyzer with Xe lamp as well as real-time UV-Vis spectroscopy with high-pressure mercury lamp. Among three PNB copolymers, a polymer with azobenzene (R=H) was the most adaptable for observation of photoisomerization behavior. It was found that the rate of photoisomerization and relaxation depended on the structure of azobenzene chromophore, rather than that of polymer backbone.

• Macromolecular Research
• /
• v.16 no.2
• /
• pp.155-162
• /
• 2008

We report the successful synthesis of poly(NBECOOH-b-NBEPOSS) copolymers, taking advantage of the sequential, living ring opening metathesis polymerization of NBETMS and NBEPOSS using the $RuCl_2(=CHPh)(PCY_3)_2$/$CH_2Cl_2$/$20^{\circ}C$ system, followed by the hydrolysis of trimethylsilyl groups in poly(NBETMS-b-NBEPOSS) copolymers. The living behavior of ROMP of NBETMS was first investigated using two diagnostic plots, a first order kinetic plot and a $\bar{M}_n$ vs. conversion plot. The plots confirmed that no termination and chain transfer reaction had occurred during polymerization. Poly(NBECOOH-b-NBEPOSS) copolymers were prepared using the sequential monomer addition of NBEPOSS to living poly(NBETMS) chain ends, followed by the hydrolysis of trimethylsilyl groups in the poly(NBETMS-b-NBEPOSS) copolymers. The high structural integrity of poly(NBE-COOH-b-NBEPOSS) copolymers was confirmed by $^1H$-NMR, $^{13}C$-NMR spcctroscopy and GPC.