• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.11a
• /
• pp.267-270
• /
• 1998

We measured the dielectric properties with YMnO$_3$ ceramics using solution method based procedure via by citrate. The crystalline phases were determined using XRD. Also we observed morphologies of YMnO$_3$ ceramics using SEM. We proved the structure of YMnO$_3$ ceramics which is hexagonal. But lots of pores were observed the microstructure. It would be considered as volatile organic. The maximum density of YMnO$_3$ ceramics is obtained sintering temperature 135$0^{\circ}C$ and the ratio 0.95/1.05 of Y/Mn. But even though the density we obtained is the highest, that is lower than theoretical density because of remaining organics by citric acid. Dielectric constant and dissipation factor were improved as increasing sintering temperature and the Y/Mn ratio (0.95/1.05)

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.110-111
• /
• 2006

In this paper, we investigated resistance characteristic of chalcogenide material for next generation ReRAM nonvolatile memory device with laser irradiation. A AES is used to test Ag doping ratio into a As-Ge-Se-S thin film. A sample resistance was observed in real time with He-Ne laser(632.8nm). As a result, resistance of thermal treated As-Ge-Se-S thin film was $500{\Omega}$ which is smaller than initial $1.3M{\Omega}$. A resistance of non-treated Ag/As-Ge-Se-S thin film was $200{\Omega}$ which is lower than $35M{\Omega}$.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.9.2-9.2
• /
• 2011

Ultrathin polyelectrolyte (PE) multilayer films prepared by the versatile layer-by layer (LbL) assembly method have been utilized for the preparation of light-emitting diodes, electrochromic, membrane, and drug delivery system, as well as for selective area patterning and particle surface modification because the various materials with specific properties can be inserted into the film with nano-level thickness irrespective of the size or the shape of substrate. Since the introduction of the LbL technique in 1991 by Decher and Hong, various hydrophilic materials can be inserted within LbL films through complementary interactions (i.e., electrostatic, hydrogen-bonding or covalent interaction). In this study, it is demonstrated that LbL SA multilayer films based on nucleophilic substitution reaction can allow the preparation of the highly efficient magnetic and/or optical films and nonvolatile memory devices.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.5
• /
• pp.624-629
• /
• 2016

The influence of electron and hole (EH) distribution on two-transistor (2T) silicon-oxide-nitride-oxide-silicon (SONOS) embedded nonvolatile memory (eNVM) is investigated in terms of reliability. As PE (program/erase) cycles are repeated, it is observed that the electron distribution in the nitride layer becomes wider. It leads to the EH distribution mismatch, which degrades the reliability of 2T SONOS eNVM.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.2 no.1
• /
• pp.1-8
• /
• 2007

In this paper, we developed a file system architecture for portable multimedia devices. To enhance user convenience, the information about the stored files should be easily retrieved and organized. We defined NMD (Networked MetaData), which can organize the files in networked fashion by attaching user-defined attributes and relation between files. The NMD is stored in flash memory to utilize its nonvolatile property and low-power consumption, while multimedia files are stored in hard disk, an inexpensive mass storage. The experimental implementation showed that this architecture was able to save about 10% power compared to the hard disk NMD-store.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1998.10a
• /
• pp.267.1-270
• /
• 1998

We measured the dielectric properties with YMnO$_3$ ceramics using solution method based procedure via by citrate. The crystalline phases were determined using XRD. Also we observed morphologies of YMnO$_3$ ceramics using SEM. We proved the structure of YMnO$_3$ ceramics which is hexagonal. But lots of pores were observed the microstructure. It would be considered as volatile organic. The maximum density of YMn03 ceramics is obtained sintering temperature 135$0^{\circ}C$ and the ratio 0.95/1.05 of Y/Mn. But even though the density we obtained is the highest, that is lower than theoretical density because of remaining organics by citric acid. Dielectric constant and dissipation factor were improved as increasing sintering temperature and the Y/Mn ratio (0.95/1.05)

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.4 no.1
• /
• pp.18-26
• /
• 2004

Back-gated silicon-on-insulator MOSFET -a threshold-voltage adjustable device-employs a constant back-gate potential to terminate source-drain electric fields and to provide carrier confinement in the channel. This suppresses shortchannel effects of nano-scale and of high drain biases, while allowing a means to threshold voltage control. We report here a theoretical analysis of this geometry to identify its natural length scales, and correlate the theoretical results with experimental device measurements. We also analyze experimental electrical characteristics for misaligned back-gate geometries to evaluate the influence on transport behavior from the device electrostatics due to the structure and position of the back-gate. The backgate structure also operates as a floating-gate nonvolatile memory (NVRAM) when the back-gate is floating. We summarize experimental and theoretical results that show the nano-scale scaling advantages of this structure over the traditional front floating-gate NVRAM.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2008.02a
• /
• pp.316-316
• /
• 2008

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.343-343
• /
• 2011

저온에서의 Thin Film Transistor (TFT) 혹은 Nonvolatile memory (NVM) 등의 MOS 구조 소자들의 높은 전기적 특성에 관한 연구들이 진행 되면서 mobility와 stability 그리고 구조화의 용이성에 대한 연구가 진행됨에 따라 amorphous silicon의 결정화를 통해 전기적 특성을 향상 시킨 Nanocrystalline silicon (nc-Si)/Microcrystalline silicon (${\mu}c$-Si)에 대한 연구가 관심을 받고 있다. 본 논문에서는 ${\leq}300^{\circ}C$에서 Inductively coupled plasma chemical vapor deposition를 이용한 TFT을 제작하였다. 가스비, 온도, 두께에 따른 결정화 정도를 Raman spectra를 통해 확인한 후 Bottom gate와 Top gate 구조의 TFT를 제작 하고 결정화에 따른 전기적 특성 향상과 그의 덧붙여 플라즈마 처리를 통한 특성 향상을 확인 하였다.

• Transactions on Electrical and Electronic Materials
• /
• v.5 no.6
• /
• pp.241-243
• /
• 2004

The phase transition between amorphous and crystalline states in chalcogenide semiconductor films can be controlled by electrical or pulsed laser beam; hence some chalcogenide semiconductor films can be applied to electrically write/erase nonvolatile memory devices, where the low conductive amorphous state and the high conductive crystalline state are assigned to binary states. In this letter, the characteristics of phase transition in differential chalcogenide thin film are investigated. Al was used for the electrode as the thickness of 100, 300, 500 nm, respectively.