• 한국지진공학회논문집
• /
• 제22권7호
• /
• pp.379-390
• /
• 2018

In this study, a numerical approach based on mid-point integrated finite elements and a viscous boundary is proposed for time-domain wave-propagation analyses in infinite poroelastic media. The proposed approach is accurate, efficient, and easy to implement in time-domain analyses. In the approach, an infinite domain is truncated at some distance. The truncated domain is represented by mid-point integrated finite elements with real element-lengths and a viscous boundary is attached to the end of the domain. Given that the dynamic behaviors of the proposed model can be expressed in terms of mass, damping, and stiffness matrices only, it can be implemented easily in the displacement-based finite-element formulation. No convolutional operations are required for time-domain calculations because the coefficient matrices are constant. The proposed numerical approach is applied to typical wave-propagation and soil-structure interaction problems. The model is verified to produce accurate and stable results. It is demonstrated that the numerical approach can be applied successfully to nonlinear soil-structure interaction problems.

• 비파괴검사학회지
• /
• 제30권5호
• /
• pp.458-463
• /
• 2010

음향 비선형성은 재료 물성의 미세한 변화에 민감하기 때문에, 이를 측정하는 비선형 초음파 기술은 재료의 열화나 피로를 평가할 수 있는 기법으로 연구되어 왔다. 하지만 벌크파를 이용하는 일반적인 비선형 초음파 기법은 얇은 판재에 적용하는 것에는 여러 한계가 있다. 이와 같은 경우에는 비선형 Lamb 파의 사용을 생각할 수 있지만, Lamb 파는 벌크파와 매우 다른 전파 특성을 가지고 있어 그 비선형 특성에 대한 별도의 연구를 필요로 한다. 이를 위해 본 연구에서는 Lamb 파에서 비선형성에 의해 전파하면서 누적 성장할 수 있는 2차 고조파 모드의 발생 조건을 분석하였으며, 그 결과 네 가지 조건, 즉 (1) phase matching, (2) non-zero power flux, (3) group velocity matching, (4) non-zero out-of-plane displacement 를 제시하였다. 그리고 제시된 조건으로 알루미늄 판재에 대책 실험한 결과 이론 예측과 동일하게 전파 거리에 따라 2차 고조파 성분의 크기와 비선형 파라미터가 증가하였고, Al6061-T6 과 Al1100-H14에서 측정된 상대적인 비선형 파라미터의 비율이 이론적인 비율과 근접함을 보였다.

• 한국해양공학회지
• /
• 제34권6호
• /
• pp.406-418
• /
• 2020

In this study, a nonlinear wave simulation code is developed using a higher-order spectral (HOS) method. The HOS method is very efficient because it can determine the solution of the boundary value problem using fast Fourier transform (FFT) without matrix operation. Based on the HOS order, the vertical velocity of the free surface boundary was estimated and applied to the nonlinear free surface boundary condition. Time integration was carried out using the fourth order Runge-Kutta method, which is known to be stable for nonlinear free-surface problems. Numerical stability against the aliasing effect was guaranteed by using the zero-padding method. In addition to simulating the initial wave field distribution, a nonlinear adjusted region for wave generation and a damping region for wave absorption were introduced for wave generation simulation. To validate the developed simulation code, the adjusted simulation was carried out and its results were compared to the eighth order Stokes theory. Long-time simulations were carried out on the irregular wave field distribution, and nonlinear wave propagation characteristics were observed from the results of the simulations. Nonlinear adjusted and damping regions were introduced to implement a numerical wave tank that successfully generated nonlinear regular waves. According to the variation in the mean wave steepness, irregular wave simulations were carried out in the numerical wave tank. The simulation results indicated an increase in the nonlinear interaction between the wave components, which was numerically verified as the mean wave steepness. The results of this study demonstrate that the HOS method is an accurate and efficient method for predicting the nonlinear interaction between waves, which increases with wave steepness.

• 대한조선학회논문집
• /
• 제42권3호
• /
• pp.205-211
• /
• 2005

In this study, a new numerical procedure for the generation of a nonlinear tailored group of waves is presented. The procedure is based on the transient wave group technique. In order to integrate the nonlinearity during the wave propagation in the computational method, the Navier-Stokes equations are applied as governing equations. The governing equations are discretized by finite volume approximation. The deformation of the free water surface in each time step is pursued with a moving grid. A two-dimensional, numerical wave tank for the simulation of the wave propagation is developed and tested in detail. The numeric results are compared first with analytical wave theories and with measurements, in order to examine the correctness of the numerical wave tank. Wave surface elevation and associated fields of velocity and pressure are numerically computed and compared with measurements. Very good agreements show up.

• 비파괴검사학회지
• /
• 제29권4호
• /
• pp.344-350
• /
• 2009

본 연구의 목적은 탄성 표면파에서의 비선형 거동의 이론적 배경을 소개하고 실험적으로 검증하는 것으로서, 이론상의 표면파의 비선형 파라미터는 벌크파에서와 같이 전파된 표면파의 2차 고조파 성분과 기본파 성분 크기의 비에 의존한다. 이를 검증하기 위해 접촉식 탐촉자를 이용한 측정 시스템을 구축하였고, 표면파 전파거리와 인가전압 크기를 변화시키며 알루미늄 6061 합금의 비선형 파라미터를 측정하였다. 또한, 비선형 파라미터를 측정함에 있어서 주파수 의존적 감쇠의 영향을 고려하였다. 이러한 과정을 통한 결과는 탄성 표면파의 비선형 파라미터가 인가전압의 크기에 독립적이며, 2차 고조파 성분의 크기는 전파거리에 선형적으로 의존할 것이라는 이론적 예측과 일치한다.

• 한국자동차공학회논문집
• /
• 제4권4호
• /
• pp.18-26
• /
• 1996

Based on experimental analysis, the characteristics of pulsating pressure wave propagation is clarified by testing of 4-stroke gasoline engine. The pulsating pressure wave in exhaust system is generated by pulsating gas flow due to working of exhaust valve. The pulsating pressure wave is closely concerned to the loss of engine power according to back pressure and exhaust noise. It is difficult to exactly calculate pulsating pressure wave propagation in exhaust system because of nonlinear effect. Therefore, in the first step for solving these problems, this paper contains experimental model and analysis method which are applied two-port network analysis. Also, it shows coherence function, frequency response function, back pressure, and gradient of temperature in exhaust system.

• 한국해양공학회지
• /
• 제20권3호
• /
• pp.1-6
• /
• 2006

Modulation theory describes propagation of surface waves with deep wave number and frequency modulation. Locally spectrally narrow wave packet can have accumulated large scale frequency shift of carrier wave during propagation. Some important nonlinear modulation effects, such as negative frequencies, phase kinks, crest pairing, etc., often observed experimentally at long fetch propagation of finite amplitude surface wave trains, are reproduced by the proposed theory. The presented model permits also to analyze the appropriately short surface wave packets and modulation periods. Solutions show the wave phase kinks to arise on areas' of relatively small free surface displacement in complete accordance with the experiments.

• 대한기계학회논문집A
• /
• 제25권2호
• /
• pp.214-219
• /
• 2001

In this paper, the nonlinear behavior of ultrasonic wave in partially degraded material is considered. For this aim, FDM(finite difference method) model for the nonlinear wave equation was developed with the restriction to the 1-D longitudinal wave motion and how the partial degradation in material contributes to the detected nonlinear parameter was analyzed quantitatively. In order to verify the rightness of this simulation method, the relation between the detected nonlinear parameter and the continuous distribution of degradation obtained from simulation was compared with experiment results and the simulation and experiment results showed similar tendency. It can be known from simulation result that the degree of degradation, the range of degradation and the continuous distribution of degradation have strong correlation with the detected nonlinear parameter. As it was possible in these simulations that only special part is assumed as degraded one, the quantitative evaluation of partially degraded material may be obtained by using this method.

• Steel and Composite Structures
• /
• 제27권3호
• /
• pp.255-271
• /
• 2018

This paper deals with the transient dynamic analysis and elastic wave propagation in a functionally graded graphene platelets (FGGPLs)-reinforced composite thick hollow cylinder, which is subjected to shock loading. A micromechanical model based on the Halpin-Tsai model and rule of mixture is modified for nonlinear functionally graded distributions of graphene platelets (GPLs) in polymer matrix of composites. The governing equations are derived for an axisymmetric FGGPLs-reinforced composite cylinder with a finite length and then solved using a hybrid meshless method based on the generalized finite difference (GFD) and Newmark finite difference methods. A numerical time discretization is performed for the dynamic problem using the Newmark method. The dynamic behaviors of the displacements and stresses are obtained and discussed in detail using the modified micromechanical model and meshless GFD method. The effects of the reinforcement of the composite cylinder by GPLs on the elastic wave propagations in both displacement and stress fields are obtained for various parameters. It is concluded that the proposed micromechanical model and also the meshless GFD method have a high capability to simulate the composite structures under shock loadings, which are reinforced by FGGPLs. It is shown that the modified micromechanical model and solution technique based on the meshless GFD method are accurate. Also, the time histories of the field variables are shown for various parameters.

• 대한기계학회논문집B
• /
• 제20권7호
• /
• pp.2315-2325
• /
• 1996

A compression wave is attenuated or distorted as it propagates in a tube. The present study investigated the propagation characteristics of the compression waves which are generated by a train in a high-speed railway tunnel. A Total Variation Diminishing (TVD) difference scheme was applied to one-dimensional, unsteady viscous compressible flow. The numerical calculation involved the effects of wall friction, heat transfer and energy loss due to the friction heat in the boundary layer behind the propagating compression wave, and compared with the measurement results of a shock tube and a real tunnel. The present results show that attenuation of the compression wave in turbulent boundary layer is stronger than in laminar boundary layer, but nonlinear effect of the compression wave is greater in the laminar boundary layer. The energy loss due to the frictional heat had not influence on attenuation and distortion of the propagating compression waves.