• 한국수산과학회지
• /
• 제30권6호
• /
• pp.1033-1043
• /
• 1997

In order to understand the generation mechanism of the Ulleung Eddy, we carried out a series of numerical experiments using the nonlinear 11/2 - layer model allowing the inflow of the Tsushima Current. According to our numerical results, the Ulleung Eddy was generated due to the inflow variations of the Tsushima Current. Its inflow through the Korea Strait was deflected to the east due to the Coriolis force and the nonlinear self advection. Thus, an anticyclonic motion was formed at the north of the Korea Strait. The inflow became a coastal boundary current, and finally flowed out model ocean through the eastern exit. When the speed of inflow decreased slowly, the eddy- like motion at the north of the Korea Strait changed into an enclosed anticyclonic eddy of about 200 km in diameter. The Ulleung Eddy became circular shape due to the nonlinear self advection, then changed into elliptical shape in meridional direction because of the blocking effect of the western boundary.

• 한국수산과학회지
• /
• 제30권6호
• /
• pp.1044-1055
• /
• 1997

To find out generating mechanism of eddies in the polar frontal zone of the East Sea, we carried out a series of numerical experiments using the nonlinear $1^{1/2}-layer$ model allowing the effect of the polar front. We assumed the polar front at about $39^{\circ}N$ in zonal direction with the cold water region in the northern part and the warm water region in the southern part of the model ocean. To examine the effect of the frontal motion without the influence of the Tsushima Current from the beginning of the geostrophic adjustment, the initial state of the model ocean was assumed motionless. Eastward current was caused by the geostrophic adjustment process in the polar frontal zone that induced a steady northward coastal current along the Korean coast to satisfy the mass continuity. The overshooting of this coastal current acted as an initial disturbance of the zonal flow field which caused meanders and eddies. The spatial scales of eddies were in good agreement with the baroclinic instability theory.

• Advances in concrete construction
• /
• 제3권2호
• /
• pp.91-102
• /
• 2015

In this paper, the load-deflection analysis of the Carbon Fiber Reinforced Polymer (CFRP) strengthened Reinforced Concrete (RC) slab using Recurrent Neural Network (RNN) is investigated. Six reinforced concrete slabs having dimension $1800{\times}400{\times}120mm$ with similar steel bar of 2T10 and strengthened using different length and width of CFRP were tested and compared with similar samples without CFRP. The experimental load-deflection results were normalized and then uploaded in MATLAB software. Loading, CFRP length and width were as neurons in input layer and mid-span deflection was as neuron in output layer. The network was generated using feed-forward network and a internal nonlinear condition space model to memorize the input data while training process. From 122 load-deflection data, 111 data utilized for network generation and 11 data for the network testing. The results of model on the testing stage showed that the generated RNN predicted the load-deflection analysis of the slabs in acceptable technique with a correlation of determination of 0.99. The ratio between predicted deflection by RNN and experimental output was in the range of 0.99 to 1.11.

• 한국정밀공학회지
• /
• 제17권11호
• /
• pp.81-87
• /
• 2000

A new resonator that is fabricated by single polysilicon layer process is presented. The resonator can move in two orthogonal direction on the plane parallel to the substrate. And the resonant frequencies of the two modes are intrinsically designed to be identical since the overall structure of the resonator is symmetric about the two directions of motion. Since the resonator ideally has two identical vibration mode, it can be applied to various micro-devices that requires multi DOF motion, especially to microgyroscopes. To investigate the feasibility of application of the resonator, dynamic model of the resonator including the nonlinear behavior of driving electrodes is derived and evaluated with the fabricated one, and the self-tuning characteristics are proved though experiments.

• 한국지반공학회논문집
• /
• 제34권11호
• /
• pp.57-70
• /
• 2018

본 논문에서는 항만구조물의 성능기반 내진설계 도입을 위해서 액상화를 포함하는 비선형 유효응력해석기법의 검증을 실시하였다. 중력식 케이슨안벽의 지진시 거동에 대해서 수치해석의 결과는 동적원심모형시험의 결과와 원형스케일로 직접 검증되었다. 중력식 안벽의 모형은 강성토조내에 지진시 과잉간극수압의 증가가 발생하는 포화 사질토 지반위에 조성되었으며, 원심가속도 60g하에서 높이 10m, 폭 6m의 케이슨 안벽을 묘사할 수 있다. 원심모형시험의 원형스케일과 동일하게 2차원 평면 변형율 조건하에서 비선형 유효응력 수치해석 모델을 구성하였다. 지반의 비선형 거동모델과 함께 Byrne의 액상화 모델을 사용하였으며, 경계요소를 적용하여 안벽과 지반의 분리거동을 묘사하였다. 검증결과, 안벽의 잔류변위를 포함하여 지반 및 안벽의 수평가속도와 안벽기초 하부 사질토 지반의 과잉간극수압 증가양상 모두 유사한 결과를 나타내었다.

• Advances in concrete construction
• /
• 제2권2호
• /
• pp.91-108
• /
• 2014

This paper presents a nonlinear finite element analysis (FEA) in order to investigate the flexural performance of one-way slabs strengthened by epoxy-bonded steel plates. Four point loading scheme is selectively chosen. A model is developed to implement the material constitutive relationships and non-linearity. Five Slabs were modeled in FEM software using ABAQUS. One slab was unstrengthened control slab and the others were strengthened with steel plates with varying the plate thickness and configuration. In order to verify the accuracy of the numerical model, a comparison was done between the experimental results available in the literature and the proposed equations by ACI 318-11 for the calculation of ultimate load capacities of strengthened slabs, the agreement has proven to be good and FEA attained accurate results compared with ACI code. A parametric study was also carried out to investigate the influence of thickness of steel plate, strength of epoxy layer and type of strengthening plate on the performance of plated slabs. Also, the practical and technical feasibility of splitting the steel plate in strengthening process has been taken into account. For practical use, the author recommended to use bonded steel plate as one unit rather than splitting it to parts, because this saves more effort and reduces the risk of execution errors as in the case of multiple bonded parts. Both techniques have nearly the same effect upon the performance of strengthened slabs.

• 한국지진공학회논문집
• /
• 제11권1호
• /
• pp.67-77
• /
• 2007

IBC와KBC 기준의 지반계수는 지반증폭 만이 고려되고 구조물-지반 상호작용 영향이 고려되지 않은 지반계수로 합리적인 구조물의 지진거동을 예측하는데 어떤 한계가 있다. 이 연구에서는 선형과 비선형 지반 위에 세워진 구조물의 탄성지진응답해석을 의사 3-D 해석으로 수행하여 구조물-지반 상호작용 영향이 고려된 지반계수의 상 하 한계값을 평가하였다. 지반의 특성은 지반 A, B, C의 경우에는 선형으로 가정하였고, 지반 D와 E의 경우에는 비선형으로 가정하여 Ramberg-Osgood 모델을 사용하여 전단파속도를 기준으로 전단탄성계수와 감쇠비 계산식을 규정하였다. 지진해석은 중 약진 지진기록 12개를 선정하여 최대 지진가속도를 0.1g와 0.2g로 조정하고, 구조물-지반 체계에 대한 의사 3-D 해석 시에는 30m 지반 하부 암반에서의 지진기록으로 변환하여 사용하였다. 구조물의 탄성 지진응답해석을 통해서 얻은 결과로부터 구조물-지반 상호작용 영향을 고려한 새로운 표준응답스펙트럼과 단주기 영역 및 주기 1초에서의 지반계수 $F_{a}$와 $F_{v}$의 상 하 한계값을 제시하였으며, KBC 기준을 위한 새로운 지반계수도 제안하였다.

• 한국통신학회논문지
• /
• 제32권5A호
• /
• pp.490-496
• /
• 2007

본 논문에서는 IEEE802.11a 무선랜용 Front-End 집적화 초소형 모듈을 측정기반 거동 모델을 기반으로 한 behavioral-level 시뮬레이션을 수행하여 설계 제작 하였다. IEEE802.11a 무선랜 표준을 만족시키기 위해 54Mbps 전송속도의 64QAM 변조 방식 심볼을 1024개 전송하는 시스템을 구현하고 이 환경에서 ACPR과 EVM 시뮬레이션을 수행하여 비선형 특성을 확인하였다. 중심주파수 5.8GHz에서 30MHz, 20MHz와 11MHz 떨어진 ACPR의 우측 offset은 각각 49.36dBc, 36.90dBc와 24.58dB이고 좌측 Offset은 각각 50.14dBc, 34.04dBc와 28.85dBc이며 EVM은 2.94%이다. LTCC 공정을 사용하여 5층 기판으로 제작한 모듈의 크기는 $13.4mm{\times}14.2mm$이다. 송신단 특성은 P1dB가 16.2dBm, 전력이득은 16.73dB로, 수신단의 특성은 소신호 이득이 16.24dB, 잡음지수가 7.83dB로 측정되었다.

• 한국농공학회지
• /
• 제39권4호
• /
• pp.106-113
• /
• 1997

Dynamic loading of structures often causes excursions of stresses well into the inelastic range, and the influence of the geometric changes on the dynamic response is also significant in many cases. Therefore, both material and geometric nonlinearity effects should be considered in case that a dynamic load acts on the structure. A structure in a nuclear power plant is a structure of importance which puts emphasis on safety. A nuclear container is a pressure vessel subject to internal pressure and this structure is constructed by a reinforced concrete or a pre-stressed concrete. In this study, the material nonlinearity effect on the dynamic response is formulated by the elasto-viscoplastic model highly corresponding to the real behavior of the material. Also, the geometrically nonlinear behavior is taken into account using a total Lagrangian coordinate system, and the equilibrium equation of motion is numerically solved by a central difference scheme. The constitutive relation of concrete is modeled according to a Drucker-Prager yield criterion in compression. The reinforcing bars are modeled by a smeared layer at the location of reinforcements, and the steel layer model under Von Mises yield criteria is adopted to represent an elastic-plastic behavior. To investigate the dynamic response of a nuclear reinforced concrete containment structure, the steel-ratios of 0, 3, 5 and 10 percent, are considered. The results obtained from the analysis of an example were summarized as follows 1. As the steel-ratio increases, the amplitude and the period of the vertical displacements in apex of dome decreased. The Dynamic Magnification Factor(DMF) was some larger than that of the structure without steel. However, the regular trend was not found in the values of DMF. 2. The dynamic response of the vertical displacement and the radial displacement in the dome-wall junction were shown that the period of displacement in initial step decreased with the steel-ratio increases. Especially, the effect of the steel on the dynamic response of radial displacement disapeared almost. The values of DMF were 1.94, 2.5, 2.62 and 2.66, and the values increased with the steel-ratio. 3. The characteristics of the dynamic response of radial displacement in the mid-wall were similar to that of dome-wall junction. The values of DMF were 1.91, 2.11, 2.13 and 2.18, and the values increased with the steel-ratio. 4. The amplitude and the period of the hoop-stresses in the dome, the dome-wall junction, and the mid-wall were shown the decreased trend with the steel-ratio. The values of DMF were some larger than those of the structure without steel. However, the regular trend was not found in the values of DMF.

• 한국안광학회지
• /
• 제7권2호
• /
• pp.1-11
• /
• 2002

눈물 층을 사이에 두고 각막 위에 부착되어 있는 콘택트 렌즈(하드렌즈)에는 모세관 현상에 따른 장력이 렌즈 가장 자리에 균일하게 방사형으로 작용한다. 이러한 장력은 렌즈가 각막에 부착되는 힘의 근원이 된다. 렌즈착용 시 자체 무게에 의한 렌즈의 회전과 렌즈가 평형상태에 도달 한 후 각막에 부착되는 힘을 계산할 수 있는 방정식과 이의 수치 계산 컴퓨터 프로그램을 수립하였으며 이 컴퓨터 모델을 사용하여 렌즈 구경, 렌즈 B.C, 눈물의 점성, 눈물 층의 두께 등의 변수가 렌즈의 평형 위치 및 부착력에 미치는 영향을 모사(simulation)하였다. 일정 각막 B.C에서 렌즈 B.C 증가에 따라 눈물 충의 간격은 급격히 증가하는데 비해 렌즈의 직경 증가는 완만한 간격 증가를 수반한다. 렌즈의 B.C가 증가할수록, 즉 렌즈의 곡률이 완만할수록, 렌즈가 각막에 fitting되는 부착력은 급격하게 감소하며 직경 감소는 완만한 부착력 감소를 초래한다. 렌즈가 각막에 부착되는 순간 렌즈의 무게로 인하여 아래 방향으로의 회전 모멘트가 발생하게 되며 이와 동시에 렌즈 위 부분 눈물 층의 간격이 아래 부분보다 좁아지게 되어 위 방향으로 알짜 힘이 작용하게 되며 이에 따른 역방향 모멘트는 중력에 의한 모멘트를 상쇄하게 되어 렌즈는 일정 위치에서 평형 상태에 도달하게 된다. 렌즈 착용에 수반되는 초기 회전각 또는 회전 변위는 렌즈의 B.C가 증가할수록 급격히 증가하는데 비해 렌즈 구경 증가는 변위 증가율이 완만하다.