• 산업경영시스템학회지
• /
• 제14권24호
• /
• pp.187-192
• /
• 1991

We consider a filling process problem on a production line. Up to present this problem have examined by 100% inspection. Thus a target value is determined which takes into account the regular selling prices, the reprocess cost, the excess quality cost and the process variability and so on. However, in this paper we propose a solution under specified sampling plan when the inspection is nondestructive.

• 산업경영시스템학회지
• /
• 제11권18호
• /
• pp.27-34
• /
• 1988

This study is concerned with the development of the economic sampling inspection plan when it is possible to carry out a nondestructive screening inspection for the rejected lots by substitutive characteristics closely related to the original quality characteristic. It is assumed that the probabilities of those errors depend linearly on the fraction defective of the process sampling inspection policy for isolated lot is studied where the probability of accepting the lot with bad quality from the results of sampling inspection is restricted to be small.

• 비파괴검사학회지
• /
• 제12권4호
• /
• pp.18-25
• /
• 1993

This paper is to aim the microdefect evaluation of If package into a quantitative from NDI's image processing of ultrasonic wave. (1) Automatically repeated discrimination analysis method can be devided in the category of all kind of defects on IC package, and also can be possible to have a sampling of partial delamination. (2) It is possible that the information of edge section in silicon chip surrounding can be extractor by the partial image processing of IC package. Also, the crack detection is possible between the resin part and lead frame.

• ALGAE
• /
• 제23권4호
• /
• pp.289-294
• /
• 2008

To estimate seaweed biomass or standing crop, a nondestructive sampling can be beneficial because of not much destroying living plants and saving time in field works. We suggest a methodological procedure to estimate seaweed biomass per unit area in marine benthic habitats by using species-specific regression equations. Percent cover data are required from the field samplings for most species to convert them to weight data. However, for tall macroalgae such as kelps we need density data and their size (e.g., size class for subtidal kelps) of individuals. We propose that the field sampling should be done with 5 replicates of 50 cm x 50 cm quadrat at three zones of intertidals (upper, middle, lower) and three depth points (1, 5, 10 m) in subtidals. To obtain a reliable regression equation for a species, a substantial number of replicate is necessary from destructive samplings. The regression equation of a species can be further specified by different locality and different season, especially for the species with variable morphology temporally and spatially. Example estimation carried out in Onpyung, Jeju Island, Korea is provided to compare estimated values with real weight data.

• 품질경영학회지
• /
• 제13권2호
• /
• pp.48-55
• /
• 1985

This paper intends to decide the optimum OC curves and to find the minimized ${\alpha}$, ${\beta}$-risk based upon the Linear Cost Model (L.C.M.) for the destructive or nondestructive acceptance sampling inspection plan. For the solution from the L.C.M., we assume the uniform distribution as a Prior-distribution and use numerical analysis by computer.

• 비파괴검사학회지
• /
• 제32권4호
• /
• pp.362-368
• /
• 2012

본 연구에서는 닫힘균열의 조기발견을 위해서 경사입사 초음파를 이용하여 계면 접촉 음향 비선형성에 의해 발생한 고조파를 영상화하고자 한다. 알루미늄 시편 두 개를 접촉하여 고체-고체 접촉계면을 만들어 닫힘균열을 모사하였고, 접촉계면 압력에 따른 초음파의 음향 비선형을 영상화하였다. 영상화 기법으로는 sampling phased array(SPA)와 synthetic aperture focusing technique(SAFT) 기법을 사용하였다. 접촉계면 압력이 증가하면서 기본 주파수의 성분은 감소하였고 2차 고조파 성분은 증가하다가 닫힘균열로 모사된 부분에서 가장 큰 값을 나타내고 이후에는 감소하였다. 결과적으로 접촉계면에서 음향 비선형성에 의해 발생한 고조파를 영상화 하는 것이 가능하며 이는 초기균열의 조기발견에 적용 가능할 것으로 기대 된다.

• Journal of Biosystems Engineering
• /
• 제43권4호
• /
• pp.369-378
• /
• 2018

Purpose: The aim of this study was to construct a saponin content-predicting model using shortwave infrared imaging spectroscopy. Methods: The experiment used a shortwave imaging spectrometer and ENVI spectral acquisition software sampling a spectrum of 910 nm-2500 nm. The corresponding preprocessing and mathematical modeling analysis was performed by Unscrambler 9.7 software to establish a ginsenoside nondestructive spectral testing prediction model. Results: The optimal preprocessing method was determined to be a standard normal variable transformation combined with the second-order differential method. The coefficient of determination, $R^2$, of the mathematical model established by the partial least squares method was found to be 0.9999, while the root mean squared error of prediction, RMSEP, was found to be 0.0043, and root mean squared error of calibration, RMSEC, was 0.0041. The residuals of the majority of the samples used for the prediction were between ${\pm}1$. Conclusion: The experiment showed that the predicted model featured a high correlation with real values and a good prediction result, such that this technique can be appropriately applied for the nondestructive testing of ginseng quality.

• 비파괴검사학회지
• /
• 제3권2호
• /
• pp.5-12
• /
• 1984

The purpose of this paper is to decide volume of crack by AE source wave analysis. The material studied in this paper was Titanium Alloy. Transient wave memory has 50 nano sampling time. The response function of specimens and transducer was obtained experimentally by use of specimens and transducer was obtained experimentally by use of breaking pencil lead as a reference simulated AE source, and the source waves were dertermined in terms of energy release-time functions explicitly through a time domain deconvolution. From experimental results, we can determine size of cracked volume.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표대회 논문집(III)
• /
• pp.767-772
• /
• 1998

schumidt hammer and ultra-sonic method are commonly used for concrete compressive strength test in a construction field. At present, various kinds of equations for estimation of strength are present, which have been used in a construction field. The purpose of this study is to evaluate the correlation between estimation strength by presentation equations and destructive strength to test specimen, and find out which is a suitable equation for this construction site. In this study, a strength test was carried out destructive test by means of core sampling. Non destructive test was conducted Schumidt hammer and ultra-sonic method, the experimental parameter were concrete age, test method and strength level. It is demonstrated that the correlation behavior of concrete strength in this study good due to the performs analysis of correlation between core strength and nondestructive strength.

• 품질경영학회지
• /
• 제7권1호
• /
• pp.26-34
• /
• 1979

This paper intends to decide the optimum OC curves and to find the minimized ${\alpha},{\beta}$-risk based upon the Linear Cost Model (L. C. M.) for the destructive or nondestructive acceptance sampling inspection plan. For the solution from the L. C. M., the author used the prior-distribution on some assumptions.