• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.2
• /
• pp.114-121
• /
• 2013

As the weight of embedded memory within Systems-On-Chips(SoC) rapidly increases to 80-90% of the number of total transistors, the importance of testing embedded memory in SoC increases. This paper proposes IEEE std. 1500 wrapper based Programmable Memory Built-In Self-Test(PMBIST) architecture which can support various kinds of test algorithm. The proposed PMBIST guarantees high flexibility, programmability and fault coverage using not only March algorithms but also non-March algorithms such as Walking and Galloping. The PMBIST has an optimal hardware overhead by an optimum program instruction set and a smaller program memory. Furthermore, the proposed fault information processing scheme guarantees improvement of the memory yield by effectively supporting three types of the diagnostic methods for repair and diagnosis.

• Journal of Environmental Health Sciences
• /
• v.40 no.2
• /
• pp.105-113
• /
• 2014

Objectives: It is necessary to apply quantitative structure activity relationship (QSAR) for the various chemicals with insufficient toxicity data that are used in the workplace, based on the precautionary principle. This study aims to find application plan of QSAR software tool for predicting health hazards such as genetic toxicity, and carcinogenicity for some chemicals used in the electronics industries. Methods: Toxicity prediction of 21 chemicals such as 5-aminotetrazole, ethyl lactate, digallium trioxide, etc. used in electronics industries was assessed by Toxicity Prediction by Komputer Assisted Technology (TOPKAT). In order to identify the suitability and reliability of carcinogenicity prediction, 25 chemicals such as 4-aminobiphenyl, ethylene oxide, etc. which are classified as Group 1 carcinogens by the International Agency for Research on Cancer (IARC) were selected. Results: Among 21 chemicals, we obtained prediction results for 5 carcinogens, 8 non-carcinogens and 8 unpredictability chemicals. On the other hand, the carcinogenic potential of 5 carcinogens was found to be low by relevant research testing data and Oncologic TM tool. Seven of the 25 carcinogens (IARC Group 1) were wrongly predicted as non-carcinogens (false negative rate: 36.8%). We confirmed that the prediction error could be improved by combining genetic toxicity information such as mutagenicity. Conclusions: Some compounds, including inorganic chemicals and polymers, were still limited for applying toxicity prediction program. Carcinogenicity prediction may be further improved by conducting cross-validation of various toxicity prediction programs, or application of the theoretical molecular descriptors.

• Korean Journal of Environmental Agriculture
• /
• v.33 no.2
• /
• pp.144-147
• /
• 2014

BACKGROUND: It is essential to prioritize the exact and clear understanding of agricultural nonpoint source pollution (NPS) controls. The realistic policies and systems should also be developed based on this understanding. Therefore, this study aimed to present agricultural Best Management Practices (BMPs) applicable for the fields based on the Delphi survey result. METHODS AND RESULTS: This study deduced the evaluation items to assess each BMP for agricultural NPS control and conducted the surveying using the Delphi method based on agricultural BMP experts. In addition, its on-the-spot application were evaluated. Considering its importance, technical, social and economic proprieties showed that political support was ranked first and followed by cost investment, labor investment, reduction effect and resident participation. The survey findings by agricultural BMP experts showed the good performance of on-the-spot application can be achieved from fertilization by soil testing, residue and green manure application and contour plowing which are applicable within a field. Agricultural BMPs, highly applicable for the fields, were the countermeasures that farmers who are the principal bodies of agricultural NPS control could be participated directly. CONCLUSION: The active participation of farmers is essential for effective control of agricultural NPS. It is necessary to establish various incentive systems.

• International Journal of Highway Engineering
• /
• v.16 no.6
• /
• pp.39-50
• /
• 2014

PURPOSES : The objective of this study is to evaluate the curing and adhesive behavior of asphalt emulsions including polymer-modified emulsions for chip seals and fog seals. METHODS : For the laboratory testing, the evaporation test, the bitumen bond strength (BBS) test, and the Vialit test are used. Also, the rolling ball test and the damping test are employed to evaluate the curing properties of the fog seal emulsions. In order to conduct all the tests in controled condition, all test procedures are performed in the environmental chamber. The CRS-2L and the SBS CRS-2P emulsions are used as a polymer-modified emulsion, and then unmodified emulsion, the CRS-2, is compared for the evaluation of chip seal performance. For the fog seal performance evaluation, two types of polymer-modified emulsions (FPME-1 and FPME-2) and one of unmodified emulsion, the CSS-1H, are employed. All the tests are performed at different curing times and temperatures. RESULTS AND CONCLUSIONS : Overall, PMEs show better curing and adhesive behavior than non-PMEs regardless of treatments types. Especially, the curing and adhesive behavior of PMEs is much better than non-PMEs before 120 minutes of curing time. Since all the test results indicate that after 120 minutes of curing time the curing adhesive behavior of emulsions, the early curing time, i.e., 120 minutes, plays an important role in the performance of chip seals and fog seals.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.1
• /
• pp.106-113
• /
• 2013

One of feasible non-destructivity test methods for evaluation of concrete permeability is the measurement of surface resistivity. But the application to steel fiber-reinforced concrete has been limited because mis-evaluation could be caused by the steel fibers in concrete. In this study, the effect of fiber distribution on surface electrical resistivity of steel fiber-reinforced concrete was investigated through experimental program. Resistivity was measured three times on four surfaces in three rectangular and circular specimens with 0.5%, 1% and 1.5% steel fibers by volume and compared each other. The results obtained from circular specimens were consistent compared to those from rectangular specimens. And the results demonstrated that the effect of fiber distribution on surface resistivity was not significant compared to that of mixing ratio of steel fibers. In conclusion, this non-destructive testing method using measurement of surface resistivity could be used for SFRC within 0.5% steel fibers by volume.

• Journal of Korean Neurosurgical Society
• /
• v.48 no.6
• /
• pp.506-517
• /
• 2010

Objective : We investigated whether Disability Evaluation (DE) situations influence patients' neuropsychological test performances and psychopathological characteristics and which variable play a role to establish an explanation model using statistical analysis. Methods : Patients were 536 (56.6%) brain-injured persons who met inclusion and exclusion criteria, classified into the DE group (DE; n = 300, 56.0%) and the non-DE group (NDE; n = 236, 44.0%) according to the neuropsychological testing's purpose. Next, we classified DE subjects into DE cluster 1 (DEC1; 91, 17.0%), DE cluster 2 (DEC2; 125; 23.3%), and DE cluster 3 (DEC3; 84, 15.7%) via two-step cluster analysis, to specify DE characteristics. All patients completed the K-WAIS, K-MAS, K-BNT, SCL-90-R, and MMPI. Results : In comparisons between DE and NDE, the DE group showed lower intelligence quotients and more severe psychopathologic symptoms, as evaluated by the SCL-90-R and MMPI, than the NDE group did. When comparing the intelligence among the DE groups and NDE group, DEC1 group performed worst on intelligence and memory and had most severe psychopathologic symptoms than the NDE group did. The DEC2 group showed modest performance increase over the DEC1 and DEC3, similar to the NDE group. Paradoxically, the DEC3 group performed better than the NDE group did on all variables. Conclusion : The DE group showed minimal "faking bad" patterns. When we divided the DE group into three groups, the DEC1 group showed typical malingering patterns, the DEC2 group showed passive malingering patterns, and the DEC3 group suggested denial of symptoms and resistance to treatment.

• Proceedings of the Ginseng society Conference
• /
• 1978.09a
• /
• pp.67-74
• /
• 1978

The phenomenon of 'soil sickness' is one of the most important limiting factors for ginseng(Panax ginseng) production in Korea. The principal cause is known to be due to the root rots caused by Cylindrocarpon destructans and Fusarium solani. Attempts were made to control the root rots with non-polluting cultural methods or soil amendments. Among the nine soil amendments tested, crab shell, cow bone and pig feces were selected for further testing. Each of the three amendments increased the populations or various actinomycetes in the range of 10-25 times over that of non-amended soil, whereas the population of C. destructans was reduced to about $50-70\%$ as compared with the control. Five isolates of Streptomyces with clear zones on chitin-agar medium were selected and then tested for their antagonistic effects on C. destructans. When anyone of the five isolates of Streptomyces and C. destructans was grown together in a modified peptone broth, growth of the latter was highly inhibited. When three levels of crab shell, cow bone, or pig feces were used to amend potted soil infested with C. destruetans, the root rot ratings of ginseng seedlings were reduced to less than one half in all the treatments as compared to the control. In another similar experiment, crab shell and cow bone amendments resulted in almost complete control of the seedling root rots in soil infested with C. destructans or F. solani. In conclusion, biological control with soil amendments of ginseng root rots caused by C. destructans and F. solani was successful. Further basic studies should be pursued using soil amendments for better control. In addition, field experiments are needed to complement the soil amendment control measures in an integrated pest control program.

• The korean journal of orthodontics
• /
• v.43 no.1
• /
• pp.23-28
• /
• 2013

Objective: The purpose of this study was to evaluate the effect of casein phosphopeptide amorphous calcium phosphate (CPP-ACP) on the shear bond strength (SBS) of brackets bonded to non-demineralized teeth with either phosphoric acid etching or self-etching primer. Methods: Sixty human premolars were randomly assigned to 1 of 4 treatment groups (n = 15 each): phosphoric acid etching (group 1); self-etching primer (group 2); CPP-ACP for 2 weeks + phosphoric acid etching (group 3), and CPP-ACP for 2 weeks + self-etching primer (group 4). After bonding of the maxillary premolar metal brackets, specimens were subjected to shear forces in a testing machine. Scanning electron microscopy was used to observe etching patterns on the enamel surfaces of all teeth. A 2-way analysis of variance was used to test for effects of CPP-ACP and etching system on SBS. Results: Significantly higher mean SBSs were observed in groups subjected to phosphoric acid etching (i.e., groups 1 and 3; p < 0.05). On the other hand, SBSs did not appear to be influenced by CPP-ACP (i.e., groups 3 and 4; p > 0.05). We observed a uniform and clear etched pattern on the enamel surface of the phosphoric acid etching groups. Conclusions: CPP-ACP does not significantly affect the SBS of orthodontic brackets bonded to non-demineralized teeth, regardless of which adhesive method is used to bond the brackets.

• YAKHAK HOEJI
• /
• v.57 no.2
• /
• pp.132-138
• /
• 2013

Acinetobacter baumannii is gram-negative bacilli that can be widely found in environments. Recently, A. baumannii emerged as a serious nosocomial infection. A total of 92 A. baumannii were isolated from hospitalized patients in Seoul, Korea, between December 2010 and April 2011. Antimicrobial susceptibility testing was investigated using CLSI agar dilution methods. Tigecycline non-susceptible A. baumannii isolates were investigated by repetitive extragenic palindromic sequence-based PCR (rep-PCR). Pulsed-field gel electrophoresis was performed to determine the epidemiological relationships. All clinical isolates showed high-level resistance to the most commonly used antibiotics: Ciprofloxacin (87.0%), Ampicillin/sulbactam (82.6%), Cefotaxime (81.5%), Ceftazidime (80.4%). Moreover, 50.0% of these isolates were non-susceptible to tigecycline. When evaluated by RAPD analysis, generated distinct band ranging in size from 1kb to 8k band varying from 4 to 10 bands. Stricter surveillance and more rapid detection are essential to prevent the spread of multi drug resistant A. baumannii.

• Korean Journal of Remote Sensing
• /
• v.28 no.2
• /
• pp.227-235
• /
• 2012

The InSAR (Interferometric SAR) processing steps for DEM generation consist of the coregistration of two SAR data, interferogram generation, phase filtering, phase unwrapping, phase to height conversion, and geocoding, etc. In this study, we developed the precise algorithm for phase to height conversion, including the ambiguity method taking into account Earth ellipsoid, Schw$\ddot{a}$visch method, and the refined ambiguity method suitable for the interferometric pair with non-parallel obit. From the testing with JERS-1 orbit we found that the height error by traditional ambiguity method reaches to about 40 m during phase to height conversion. The proposed methods are very useful in generating precise InSAR DEM;especially in the case of using non-parallel InSAR pair due to unstable orbit control such as JERS-1 or intentional orbit control such as Cross-InSAR pair between ERS2 and ENVISAT satellite.