• Restorative Dentistry and Endodontics
• /
• v.42 no.1
• /
• pp.1-8
• /
• 2017

Objectives: The purpose of this study was to evaluate the effect of adhesive luting on the fracture resistance of zirconia compared to that of a composite resin and a lithium disilicate glass ceramic. Materials and Methods: The specimens (dimension: $2mm{\times}2mm{\times}25mm$) of the composite resin, lithium disilicate glass ceramic, and yttria-stabilized tetragonal zirconia polycrystal (Y-TZP) were prepared. These were then divided into nine groups: three non-luting groups, three non-adhesive luting groups, and three adhesive luting groups, for each restorative material. In the non-luting groups, specimens were placed on the bovine tooth without any luting agents. In the non-adhesive luting groups, only zinc phosphate cement was used for luting the specimen to the bovine tooth. In the adhesive luting groups, specimens were pretreated, and the adhesive luting procedure was performed using a self-adhesive resin cement. For all the groups, a flexural test was performed using universal testing machine, in which the fracture resistance was measured by recording the force at which the specimen was fractured. Results: The fracture resistance after adhesive luting increased by approximately 29% in the case of the composite resin, 26% in the case of the lithium disilicate glass ceramic, and only 2% in the case of Y-TZP as compared to non-adhesive luting. Conclusions: The fracture resistance of Y-TZP did not increased significantly after adhesive luting as compared to that of the composite resin and the lithium disilicate glass ceramic.

• Journal of Nutrition and Health
• /
• v.32 no.5
• /
• pp.570-576
• /
• 1999

This study was carried out to examine the effects of alcohol on serum lipid levels. Subjects of this study were 50 military officers living in Honsung, Korea, 25 of whom consumed alcohol on a regular basis and 25 of whom did not. All subjects were previously informed of the purpose of the study and the methods of food intake reporting and blood testing. The age distribution range of subjects was 30-49 years. Weight, height, and body mass index(BMI) were not significantly different between the two groups. Blood pressure was compared, and it was found that the drinker group had mean systolic(SBP) and diastolic blood pressures(DBP) 10mmHg higher than the non-drinker group. Nutrient intake levels of the two groups were not significantly different and were adequate with respect to the recommended dietary allowances. It was found that the drinker group ingested more calories, protein, fat and vitamn B1 than the non-drinker group, while the non-drinker group ingested more carbohydrate, calcium, iron, vitamin A, niacin and ascorbic acid. These differences were believed caused by increased caloric intake from alcohol and additional intake of meat served with drinks for the drinking group. Fourteen of the twenty-five drinkers(56%) had drank regularly for five to ten years. Most drinkers drank 2-3 times per week, with alcohol intake less than two bottles(720ml)of distilled liquor(Soju) at a time. Meat was often served with alcohol as reported by 72% of the drinker group, and was believed to contribute to raised intake of calories, protein and fat in this group. Serum lipid levels of both groups were classified as normal, but the components of total cholesterol, triglycerides were significantly higher in drinkers than non-drinkers. The correlation between triglyceride levels and alcohol intake at one sitting was shown to be significantly positive(r=0.57, p<0.01), so it was believed that triglyceride elevation was associated more with heavy drinking than light drinking. We can conclude that if alcohol is consumed with a normal diet, then serum cholesterol, triglyceride and total lipid levels are expected to increase.

• Journal of Veterinary Science
• /
• v.21 no.6
• /
• pp.87.1-87.11
• /
• 2020

Background: A new, extended long-acting tilmicosin (TLAe) preparation was tested against intramammary ceftiofur (CEF) using a non-inferiority trial model during dry-cow therapy (DCT) in a farm with high bovine population density and deficient hygiene application. Objectives: To evaluate the possibility that TLAe administered parenterally can achieve non-inferiority status compared to CEF administered intramammary for DCT. Methods: Cows were randomly assigned to TLAe (20 mg/kg subcutaneous; n = 53) or CEF (CEF-HCl, 125 mg/quarter; n = 38 cows) treatment groups. California mastitis testing, colony-forming unit assessment (CFU/mL), and number of cases positive for Staphylococcus aureus were quantified before DCT and 7 d after calving. A complete cure was defined as no bacteria isolated; partial cure when CFU/mL ranged from 150 to 700, and cure-failure when CFU/mL was above 700. Results: TLAe and CEF had overall cure rates of 57% and 53% (p > 0.05) and S. aureus cure rates of 77.7% and 25%, respectively (p < 0.05). The pathogens detected at DCT and 7 days after calving were S. aureus (62.71% and 35.55%), Staphylococcus spp. (22.03% and 35.55%), Streptococcus uberis (10.16% and 13.33%), and Escherichia coli (5.08% and 15.55%). Non-inferiority and binary logistic regression analyses revealed a lack of difference in overall efficacies of TLAe and CEF. Apart from S. aureus, S. uberis was the predominant pathogen found in both groups. Conclusions: This study is the first successful report of parenteral DCT showing comparable efficacy as CEF, the gold-standard. The extended long-term pharmacokinetic activity of TLAe explains these results.

• Restorative Dentistry and Endodontics
• /
• v.49 no.2
• /
• pp.18.1-18.13
• /
• 2024

Objectives: This study was conducted to evaluate the mechanical properties of relined and non-relined fiberglass posts when cemented to root canal dentin using a conventional dual-cure resin cement or a self-adhesive resin cement. Materials and Methods: Two types of resin cements were utilized: conventional and self-adhesive. Additionally, 2 cementation protocols were employed, involving relined and non-relined fiberglass posts. In total, 72 bovine incisors were cemented and subjected to push-out bond strength testing (n = 10) followed by failure mode analysis. The cross-sectional microhardness (n = 5) was assessed along the root canal, and interface analyses (n = 3) were conducted using scanning electron microscopy (SEM). Data from the push-out bond strength and cross-sectional microhardness tests were analyzed via 3-way analysis of variance and the Bonferroni post-hoc test (α= 0.05). Results: For non-relined fiberglass posts, conventional resin cement exhibited higher pushout bond strength than self-adhesive cement. Relined fiberglass posts yielded comparable results between the resin cements. Type II failure was the most common failure mode for both resin cements, regardless of cementation protocol. The use of relined fiberglass posts improved the cross-sectional microhardness values for both cements. SEM images revealed voids and bubbles in the incisors with non-relined fiberglass posts. Conclusions: Mechanical properties were impacted by the cementation protocol. Relined fiberglass posts presented the highest push-out bond strength and cross-sectional microhardness values, regardless of the resin cement used (conventional dual-cure or self-adhesive). Conversely, for non-relined fiberglass posts, the conventional dual-cure resin cement yielded superior results to the self-adhesive resin cement.

• Animal Bioscience
• /
• v.37 no.5
• /
• pp.918-928
• /
• 2024

Objective: The adulteration of raw beef (BMr) with dog meat (DMr) and pork (PMr) becomes a serious problem because it is associated with halal status, quality, and safety of meats. This research aimed to develop an effective authentication method to detect non-halal meats (dog meat and pork) in beef using metabolomics approach. Methods: Liquid chromatography-high resolution mass spectrometry (LC-HRMS) using untargeted approach combined with chemometrics was applied for analysis non-halal meats in BMr. Results: The untargeted metabolomics approach successfully identified various metabolites in BMr DMr, PMr, and their mixtures. The discrimination and classification between authentic BMr and those adulterated with DMr and PMr were successfully determined using partial least square-discriminant analysis (PLS-DA) with high accuracy. All BMr samples containing non-halal meats could be differentiated from authentic BMr. A number of discriminating metabolites with potential as biomarkers to discriminate BMr in the mixtures with DMr and PMr could be identified from the analysis of variable importance for projection value. Partial least square (PLS) and orthogonal PLS (OPLS) regression using discriminating metabolites showed high accuracy (R² >0.990) and high precision (both RMSEC and RMSEE <5%) in predicting the concentration of DMr and PMr present in beef indicating that the discriminating metabolites were good predictors. The developed untargeted LC-HRMS metabolomics and chemometrics successfully identified non-halal meats adulteration (DMr and PMr) in beef with high sensitivity up to 0.1% (w/w). Conclusion: A combination of LC-HRMS untargeted metabolomic and chemometrics promises to be an effective analytical technique for halal authenticity testing of meats. This method could be further standardized and proposed as a method for halal authentication of meats.

• Food Science of Animal Resources
• /
• v.29 no.1
• /
• pp.132-139
• /
• 2009

The objective of this study was to investigate the most effective analysis methods for palatability grading of Hanwoo beef by comparing the results of discriminant analysis with sensory data. The sensory data were obtained from sensory testing by 1,300 consumers evaluated tenderness, juiciness, flavor-likeness and overall acceptability of Hanwoo beef samples prepared by boiling, roasting and grilling cooking methods. For the discriminant analysis with one factor, overall acceptability, the linear discriminant functions and the non-parametric discriminant function with the Gaussian kernel were estimated. The linear discriminant functions were simple and easy to understand while the non-parametric discriminant functions were not explicit and had the problem of selection of kernel function and bandwidth. With the three palatability factors such as tenderness, juiciness and flavor-likeness, the canonical discriminant analysis was used and the ability of classification was calculated with the accurate classification rate and the error rate. The canonical discriminant analysis did not need the specific distributional assumptions and only used the principal component and canonical correlation. Also, it contained the function of 3 factors (tenderness, juiciness and flavor-likeness) and accurate classification rate was similar with the other discriminant methods. Therefore, the canonical discriminant analysis was the most proper method to analyze the palatability grading of Hanwoo beef.

• Journal of Haehwa Medicine
• /
• v.13 no.2
• /
• pp.187-196
• /
• 2004

Now many sustitution and false articles is used in korea instead of shanyao. To use shanyao correctly, we will make a quilitative certificational plan of shanyao to investigate all of lieraturea, records and documents. And we could reach conclusions as folloews. 1) Source About a source of shanyao, though korea and china has a each other source, we think there is no problem in use of both. 2) Process In our country producing shanyao as medical use is a 'duanma', we can divide into peeling and non-peeling, drying at bulks and at briquets, steaming shanyao and fresh shanyao. Regardless of existence for peeling and steaming, a distributing shanyao is received a proper judgment. Like this result was expressed by insufficiency of standards about medical components or indicating components. We detected a reminding S02 more than 10 ppm. And this expresses that there ia a problum at a drying method. To suggest proper processing methods, a standard of quility will have to be made which the existence of peeling, difference of quility between 'changma' and 'duanma', drying method and exudation test with cutted thickness are adaptable. Besides, 'maoshanyao' and 'guangshanyao' of china is processed by various methods which decrease a medical effect such as too much soaking shanyao in water, steaming with a sulfur, too much peeling, So we must process shanyao like the next methods. (1) When harvesting, dig deeply not to cut off roots. (2) Not to peel, wash shanyao in a washing machine. (3) Dry to 50-60% degree at sunny place or drying machine. (4) To be easy for drying and exudation, cut off a thick piece with 5 mm (5) Dry perfectly at ding machine. 3) Quality3) Quality (1) Functional standards It is not Proper that 'guangshanyao' is used in china because it has a problem with quility on process of working, If they did not soak shanyao in water or heat with steam, it is the real situation that they cannot cutt off shanyao evenly. In conclusion, shanyao must be heavy, powdery with a perfectly non-peeling surface, section surface is yellow-white color, unequal and has no holes. (2) Physicochemical standards It is the real situation that we can not distinguish into quility of shanyao with established test because various workings which decrease medical effects is used. Therefore we suggest a testing standard of S02 which is used in bleaching. And testing standards relatived with decrease of medical effects must be established at once. It must that Dry on loss is less than 14.0%, content of ash is less than 6.0%. Content of acid-nonsoluble ash is less than 0.5%. Contens of heavy metal has to detect less than 30 ppm and there is no reminding agricultural medince.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.59 no.2
• /
• pp.188-193
• /
• 2014

Seed viability testing provides valuable information for assessing seed lot germinability. However, most testing methods require destruction of seed prior to test. Because the dissected seeds for viability test cannot be used further evaluation, the nondestructively X-ray photography technique that can be applied for the evaluation of seed quality has been developed. In order to know the validity and accuracy of X-ray photography technique in seed evaluation test that conducted to remove the abnormal seed from a seed lot, we have compared the results from tetrazolium viability test, germination test and X-ray contrast method in cotton. Metallic salts treatment increased the efficiency of X-ray photographic method by enhancing the penetration of X-ray in abnormal or damaged seeds rather than normal seeds that have strong and well-organized tissues in seed. Cotton seeds presoaked for 16 hr in distilled water followed by soaking into metallic salt solution (5% NaI in water) for 60 min were easily classified seeds into dead seed and viable seed based on the radiography images obtained by X-ray radiation. We concluded that soft X-ray photography was reliable to find out the various defective characters due to heat and mechanical damage of seeds.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.10
• /
• pp.108-114
• /
• 2018

Due to the development of nondestructive testing techniques, methods of inspecting cracks in mechanical parts have drawn attentions. Among various non-destructive testing methods the acoustic resonance method which analyzes the natural frequencies has been developed into a technique suitable for the prompt judgements of the existence of the defects in the mechanical parts. In this study, we investigated the crack inspection technique to examine the cracks in the yoke tubes by using the acoustic resonance method and realized the system to quickly detect the cracks. A 24bit ADC circuit and an MCU were installed for the smooth data collection, and a TCP / IP communication interface was configured for the data communication with PC. We used a microphone as a sensor measuring the vibrations. We constructed an analysis software to obtain the frequency spectra of the vibrations, to find the existence of the cracks, and to feedback to the user. Tests were conducted using the yoke tubes manufactured in the real industrial field. The tests were successfully conducted to distinguish the good products from the defective (cracked) products and confirmed that they can be employed in the actual industrial field.

• Journal of Environmental Health Sciences
• /
• v.39 no.2
• /
• pp.130-137
• /
• 2013

Objectives: The OECD QSAR Application Toolbox was developed by the Organisation for Economic Cooperation and Development (OECD) to facilitate the practical use of QSAR approaches in regulatory contexts as well as to reduce the need for additional animal testing. In this study, human health and the ecotoxicity of chemicals were predicted by applying the OECD QSAR Application Toolbox and the results were compared with experimental data in order to evaluate the applicability of this program. Methods: Read-across, trend analysis, and QSAR of OECD QSAR Application Toolbox were used for the prediction of toxicity. Results: The toxicity prediction was conducted on 6,354 chemicals for which toxicity data have been produced on the six endpoints of skin sensitization, skin irritation, eye irritation, mutagenicity, and acute toxicities of fish and Daphnia. From the total of 6,354, we obtained prediction results for 1,621 chemicals (25.5%). Conclusions: The predicted properties of mutagenicity, skin sensitization, and acute aquatic toxicities were reasonably good when compared with experimental data, but other endpoints were not due to the limitation of applicable chemical groups.