• 비파괴검사학회지
• /
• 제30권5호
• /
• pp.489-496
• /
• 2010

발전 및 화학플랜트의 많은 고온 설비는 장시간 운전으로 인해 재질열화 현상이 필연적으로 발생된다. 이러한 고온설비의 건전성 확보와 신뢰성 있는 수명평가를 위해서는 비파괴평가기법인 표면복제시험을 통한 미세조직분석 평가법이 현재까지 유용한 것으로 인식되어왔다. 이러한 표변복제기법은 기존의 평가법과 함께 탄화물평가를 통한 재질열화도 평가 등 새로운 정량적 접근법이 필요하며 다양하게 시도되고 있다. 본 논문에서는 표면복제기법과 관련한 기술개발 현황과 현장 적용사례들을 소개하고, 합리적인 평가결과 여부에 대해 기술하였으며, 현장설비에 대해 표면복제시험 후 미세조직을 분석한 결과 탄화물 평가방법이 정량적으로 유용함을 입증하였다.

• 한국안전학회지
• /
• 제15권1호
• /
• pp.28-35
• /
• 2000

As huge energy transfer systems like a nuclear power plant, steam power plant and petrochemical plant are operated for a long time, mechanical properties are changed by degradation. The life time of the systems can be affected by the mechanical properties. So determination of the integrity of the metallic structure is required either to en4sure that failure will not occur during the service life of the components or to evaluate the lifetime extension of the structure. An automated ball indentation(ABI) method was developed as a non-destructive technique for evaluating the integrity of such metallic components. In this paper, we would like to present the aging evaluation technique by the ABI method. The five classes of the thermally aged CF8M specimens were prepared using an artificially accelerated aging method. After holding 100, 300, 900, 1800 and 3600 hours at 43$0^{\circ}C$, the specimens were cooled down using water to room temperature respectively. The tensile test, hardness test, charpy impact test, ABI test were performed. The results of the fracture test were compared with those of ABI test and the new evaluation technique of the integrity of metallic structures was developed.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.268-273
• /
• 2001

Fossil power plants operated in high temperature condition are composed of components such as turbine, boiler, and piping system. Among these components, turbine blades made with 12%Cr steel operate at a temperature above $500^{\circ}C$. Due to the long term service, turbine blades experience material degradation manifested by change in mechanical and microstructural properties. The need to make life assessment and to evaluate material degradation of turbine blade is strongly required but in reality, there is a lack of knowledge in defining failure mechanism and fundamental data for this component. Therefore, in making life assessment of turbine blade, evaluation of material degradation must be a priority. For this purpose, evaluation of toughness degradation is very important. The major cause of toughness degradation in 12Cr turbine blade is reported to be critical corrosion pitting induced by segregation of impurity elements(P etc.), coarsening of carbide, and corrosion, but the of materials for in-service application. In this study, the purpose of research is focused on evaluating toughness degradation with respect to operation time for 12%Cr steel turbine blade under high temperature steam environment and quantitatively detecting the degradation properties which is the cause of toughness degradation by means of non-destructive method, electrochemical polarization.

• 한국연초학회지
• /
• 제7권1호
• /
• pp.85-92
• /
• 1985

Extraction efficienties of volatile organic acids in tobacco leaves according to several extraction methods were investigated and contents of volatile organic acids in 16 kinds of tobacco leaf varieties were compared. Extraction efficiency according to simultaneous distillation and extraction was 5 to 10 times higher than that according to solvent extraction, steam distillation, essential oil extraction or continuous extraction and distillation. Total contents of volatile organic acids were 1.62 to 12.94mg per l00g of sample in aromatic tobacco varieties,0.12 to 2.08mg in flue-cured tobacco leaves, and trace in burleys. Among the Korean aromatic tobacco varieties, total contents of volatile organic acids in ST374-3 were the highest, 4.66mg per l00g of sample, and those in Sohyang and Hyangcho were low, 1.69mg and 1.62mg, respectively. Among flue-cured tobacco varieties, those in NC2326 were the highest, 2.08mg per 100g of sample, but those in the other varieties were not more than 0.80mg per 1 00g of sample. Total contents of volatile organic acids in acidic hydrolysis with 0.1 M tartaric acid were higher than in non-acidic condition in all kinds of tobacco varieties.

• 한국식품조리과학회지
• /
• 제26권6호
• /
• pp.840-847
• /
• 2010

In this study, we identified the volatile compounds of Artemisia princeps Pampan. cv. ssajuari (ssajuarissuk) essential oils and analyzed changes in the contents of volatile compounds under four different storage conditions, such as exposure to air at $20^{\circ}C$ and $40^{\circ}C$. Sixty-five volatile compounds consisting of 6 monoterpene hydrocarbons, 23 oxygenated monoterpenes, 16 sesquiterpene hydrocarbons, 6 oxygenated sesquiterpenes, 1 diterpene, 6 benzene derivatives, and 7 non-isoprenoid compounds were identified on the basis of their mass spectra characteristics and retention indices from original ssajuarissuk essential oils. Identified compounds constituted 90.56% of the total peak area. Borneol (10.29%) was the most abundant compound in the original ssajuarissuk essential oils, followed by 1,8-cineole (9.06%), viridiflorol (8.99%), spathulenol (8.73%), $\alpha$-thujone (5.28%), and camphor (4.39%). After six months storage at $40^{\circ}C$ with the cap opened for 3 min everyday, the total amount of volatile compounds in essential oil as determined by the percentage peak area decreased by 84.93%. The total levels of cis-sabinene hydrate, camphor, 4-terpineol, humulene oxide, $\beta$-caryophyllene oxide, and caryophyllene alcohol increased significantly. For ssajuarissuk essential oils stored under experimental conditions, changes in the contents of volatile compounds in essential oils were accelerated by temperature and contact with the atmosphere.

• Carbon letters
• /
• 제4권4호
• /
• pp.168-174
• /
• 2003

Silver nitrate ($AgNO_3$) powder was mixed into a reformed pitch precursor. Then, the silver-containing pitch was melt spun to form round and "C" shape fibers. A wire mesh was inserted prior to the nozzle to improve the spinnability of the silvercontaining precursor pitch. Silver particles in the carbon fibers (CFs) were detected by XRD and TEM. These tests showed that silver particles were uniformly distributed and the total amount of silver remained constant during stabilization and carbonization. Next, the silver-containing CFs were activated by steam diluted in nitrogen gas. Silver particles accelerated the activation rate, but the specific surface areas of the silver-containing ACFs were similar to those of non-silver containing ACFs at the same burn-off levels. The specific surface area of the C-shaped activated carbon fibers was larger than that of the round activated carbon fibers. The likely reason is that the surface area of a C-shaped CF is about two times larger than that of a round CF when equivalent cross-sectional areas are compared. A small amount of silver particles in the periphery of the CFs was removed during the activation, but the remainder of silver was stayed within the ACFs.

• 설비공학논문집
• /
• 제19권12호
• /
• pp.811-820
• /
• 2007

A Study on the optimal design of the AIG(Ammonia Injection Grid) to improve the performance of DeNOx facilities in the HRSG(Heat Recovery Steam Generator) was performed using the CFD analysis. On the basis of the flow analysis results in the case that the AIG in the HRSG was not installed, the numerical analyses according to the positions of AIG, injection angles of nozzle and the control of ammonia injection quantity were carried out. The standard deviation according to factors was calculated for quantitative comparison. As the results, the AIG in the HRSG should be installed in the position that the uniform flow field shows through the exact flow analysis in the previous of the AIG design and installation. In the case the AIG has already been installed and non uniform flow distribution shows, it is recommended that flow correction device or KoNOx catalyst should be used. Otherwise, the control of ammonia injection angle or the ammonia injection quantity using the velocity profile analysis is demanded to accomplish the optimal performance.

• 한국식생활문화학회지
• /
• 제30권6호
• /
• pp.766-772
• /
• 2015

This research was conducted to investigate the effect of essential oil (EO) from Artemisia Princeps Pampanini on quality of tomato during storage. EO was extracted by steam distillation and diluted by 1 and 2%. Total phenolic contents and antioxidative activities of EO were analyzed. Tomato was packaged corrugated box covered with polypropylene (PP) film containing EO (1 and 2%) and then stored at room temperature for 10 days. During storage, appearance, weight loss rate, soluble solid contents, pH and a (redness) value were measured for tomato. Total phenolic contents of EO increased in a dose-dependence. The DPPH and ABTS radical scavenging activities also showed a concentration-dependent increase. The weight loss rate was lowest using the film packaged in 1% EO. During the storage period, soluble solid contents and pH increased in all treatments. The a value increased regardless of EO concentration in films. Especially, tomato packaged with EO film showed a lower a value than non EO-packaged ones. This result suggests that application of EO to film is effective for tomato quality preservation.

• Carbon letters
• /
• 제9권1호
• /
• pp.8-16
• /
• 2008

Oxidized activated carbons were prepared by reacting steam-activated carbon developed from pecan shells with nitric acid of varying strength (15, 30, 45 and 60%). The textural properties and the chemistry of the surface of the non-oxidized and of the oxidized carbons were determined from nitrogen adsorption and base neutralization capacities. The uptake of Pb(II) and Cd(II) from aqueous solution by these carbons was determined by kinetic and equilibrium experiments as well as by the column method. Treatment with nitric acid brought about drastic decrease in surface area and remarkable increase in the pore size of the carbon with these changes depending on the strength of nitric acid. Nitric acid increased the surface acidity by developing new surface oxygen functional groups of acidic nature. $HNO_3$-oxidized carbons exhibited high adsorption capacities for Pb(II) and Cd(II). The adsorption of these ions increased with the decrease of the surface pH of the carbon and with the increase of the solution pH from 2.5 to 6 and 7. The amount adsorbed from lead and cadmium was also related to the amount of surface acidity, the pH of the point of zero charge and on some metal ion parameters. Cadmium and lead uptake by the investigated carbons followed pseudo-second order model and the equilibrium sorption data fitted Langmuir adsorption model.

• 물과 미래
• /
• 제11권2호
• /
• pp.54-61
• /
• 1978

비교적 주기성이 강하고 경향성이 존재하는 유량시계열에 있어서 예측 및 모의발생을 위한 모형개발이 시도되었다. 원시계열로부터 구한 차분시계열(Diffe renced time series)이 정상공분산을 갖는다는 가정하여 모형의 고정화(Model Intentification)가 실시되었으며, 정상가정을 정당화하기 위해 잔차(Residual)의 통계적 성질을 검토하였다. 또한, 동정된 모형의 예측 정도를 노이기 위하여 예측오차의 분산이 최소가 되도록 추계적 제어(Stochastic Control)된 모형을 예측에 사용하였다. 한국주요하천유역의 유량자료에 대한 모형의 고정과 예측결과로부터, 차분연산자(Difference operator)는 경향과 주기를 제거하는데 좋은 방법이 됨이 판단되었다.