State of the Art in Life Assessment for High Temperature Components Using Replication Method

표면복제기법을 이용한 고온 설비의 수명평가 현황과 적용사례

  • Received : 2010.08.13
  • Accepted : 2010.10.08
  • Published : 2010.10.30

Abstract

The power generation and chemical industry have been subjected to further material degradation with long term operations and need to predict the remaining service life of components, such as reformer tube and steam turbine rotor, that have operated at elevated temperatures. As a non-destructive technique, replication method with reliable metallurgical life and microstructural soundness assessment has been recognized with strongly useful method until now. Developments of this method have variously accomplished by new quantitative approach, such as carbide analysis, with A-parameter and grain deformation method. An overview of replication, some new techniques for material degradation and life assessment were introduced in this paper. Also, on-site applications and its reasonableness were described. As a result of having analyzed microstructure by replication method, carbide approach was quantitatively useful to life assessment.

발전 및 화학플랜트의 많은 고온 설비는 장시간 운전으로 인해 재질열화 현상이 필연적으로 발생된다. 이러한 고온설비의 건전성 확보와 신뢰성 있는 수명평가를 위해서는 비파괴평가기법인 표면복제시험을 통한 미세조직분석 평가법이 현재까지 유용한 것으로 인식되어왔다. 이러한 표변복제기법은 기존의 평가법과 함께 탄화물평가를 통한 재질열화도 평가 등 새로운 정량적 접근법이 필요하며 다양하게 시도되고 있다. 본 논문에서는 표면복제기법과 관련한 기술개발 현황과 현장 적용사례들을 소개하고, 합리적인 평가결과 여부에 대해 기술하였으며, 현장설비에 대해 표면복제시험 후 미세조직을 분석한 결과 탄화물 평가방법이 정량적으로 유용함을 입증하였다.

Keywords

References

  1. 김건영, 기계, 구조물의 경년열화와 수명평가기술, 비파괴검사학회지, Vol. 19, No. 2, pp. 94-109(1994)
  2. 박익근, 발전설비의 유지보수와 비파괴검사 현황(I), 비파괴검사학회지, Vol.24, No. 2, pp. 197-209(2004)
  3. 이상국, 발전용 Cr-Mo강의 결정립 변형법 및 초음파법에 의한 열화도 평가 연구, 비파괴감사학회 추계학술대회 논문집, pp. 40-45 (2002)
  4. B. J. Cane and M. S. Shanmmas, "A method for remanent life estimation by quantitative assessment of creep cavitation on plant," Report TPRD/LJ2645/N84, CEGB, (1984)
  5. M. Shammas et al., "Remaining life of boiler pressure parts, HAZ models," Final Report RP 2253-1, Vol. 2, EPRI, (1988)
  6. M. C. Askins et al., "Remainin life of boiler pressure part-base material model," Report RP 2253-1, Vol. 3, EPRl, (1988)
  7. J. M. Brear, et al., "Models for determination of creep curves in low alloy ferritic steels based on carbide coarsening," Report RP 2253-1, Report P2, EPRI, (1984)