상전이 방법을 이용하여 전기흡착용 다공성 탄소전극을 제조하였다. 활성탄소분말(ACP)과 Polyvinylidene fluoride(PVdF) 용액을 혼합한 전극슬러리를 제조한 후 나이프 캐스팅 방법으로 전극슬러리를 흑연박막 위에 코팅하였다. 코팅된 전극을 비용매인 증류수에 침지시켜 다공성 탄소전극을 제조하였다. ACP의 함량비(50.0, 75.0, 83.3, 87.5, 90.0 wt%)를 변화시켜 전극을 제조하여 ACP 함량에 따른 탄소전극의 물리적, 전기화학적 특성을 분석하였다. SEM 사진을 통해 제조된 탄소전극의 표면을 관찰한 결과 상전이에 의해 미세한 기공들이 전극 표면에 균일하게 형성됨을 확인할 수 있었다. 또한 전극의 평균 기공 크기는 72.7$\sim$86.4 nm로 나타났으며 ACP의 함량이 증가할수록 기공의 크기는 감소하였다. 제조된 전극들에 대해 cyclic voltammetry(CV) 분석법으로 전기화학적 특성을 분석하였다. 모든 전극에서 전형적인 전기이중층에서의 흡착 및 탈착반응을 나타내었다. 전극의 축전용량은 ACP의 함량비가 증가할수록 크게 증가하였으며 ACP 함량이 50.0 wt%일 때 2.18 F/cm$^2$, 90.0 wt%일 때 4.77 F/cm$^2$의 축전용량을 나타내었다.
자외선 흡광도가 거의 없는 농작물의 생장 조절용 농약으로 사용되고 있는 지베렐린(GAs) 중 하나인 지베렐린 산($GA_3$)은 발색단이 미약해서 자외선 검출기를 이용하여 분석하기가 어려운 물질이다. 액체-액체 추출법을 이용하여 과일류로부터 지베렐린 산을 효과적으로 추출하기 위하여 시료의 pH와 추출용매에 대한 최적의 추출조건을 확립하고자 하였다. 페나실 브로마이드를 유도체화 시약으로 사용함으로써 자외선 검출기에 선택적이며 감도가 좋은 $GA_3$-유도체 화합물을 만들었으며, 최적의 유도체화 조건을 확립하기 위해서 반응온도 및 시간, 유도체화 시약의 양, 염기의 양 등을 변화시켜주는 실험이 수행되었다. 유도체화 된 $GA_3$는 C18 컬럼을 사용하여 방해물질이 없이 HPLC/UV-vis로 효과적으로 분석되었으며, HPLC/ESI-MS를 사용하여 유도체화된 화합물의 구조를 확인하였다. 사과의 경우, 검출한계(LOD)와 정량한계(LOQ)는 각각 0.008 mg/kg, 0.027 mg/kg로, 배의 경우, 검출한계(LOD)와 정량한계(LOQ)는 각각 0.003 mg/kg, 0.012 mg/kg로 낮은 검출한계와 정량한계를 보였다. 확립된 유도체화 방법은 과일류 중에 존재하는 $GA_3$의 효과적이고 편리한 분석에 응용될 수 있을 것이다.
Suryawanshi, Mahesh P.;Kim, Seonghyeop;Ghorpade, Uma V.;Suryawanshi, Umesh P.;Jang, Jun Sung;Gang, Myeng Gil;Kim, Jin Hyeok;Moon, Jong Ha
한국재료학회지
/
제27권11호
/
pp.631-635
/
2017
We report facile solution processing of mesoporous hematite (${\alpha}-Fe_2O_3$) thin films for high efficiency solar-driven water splitting. $Fe_2O_3$ thin films were prepared on fluorine doped tin oxide(FTO) conducting substrates by spin coating of a precursor solution followed by annealing at $550^{\circ}C$ for 30 min. in air ambient. Specifically, the precursor solution was prepared by dissolving non-toxic $FeCl_3$ as an Fe source in highly versatile dimethyl sulfoxide(DMSO) as a solvent. The as-deposited and annealed thin films were characterized for their morphological, structural and optical properties using field-emission scanning electron microscopy(FE-SEM), X-ray diffraction(XRD), X-ray photoelectron spectroscopy(XPS) and UV-Vis absorption spectroscopy. The photoelectrochemical performance of the precursor (${\alpha}-FeOOH$) and annealed (${\alpha}-Fe_2O_3$) films were characterized and it was found that the ${\alpha}-Fe_2O_3$ film exhibited an increased photocurrent density of ${\sim}0.78mA/cm^2$ at 1.23 V vs. RHE, which is about 3.4 times higher than that of the ${\alpha}-FeOOH$ films ($0.23mA/cm^2$ at 1.23 V vs. RHE). The improved performance can be attributed to the improved crystallinity and porosity of ${\alpha}-Fe_2O_3$ thin films after annealing treatment at higher temperatures. Detailed electrical characterization was further carried out to elucidate the enhanced PEC performance of ${\alpha}-Fe_2O_3$ thin films.
L-[18F]FMAU ([18F]1b) was prepared from the precursor 2-O-[(trifluoromethyl)-sulfonyl]-1,3,5-tri-Obenzoyl- α-L-ribofuranose, by coupling the radioactive fluoro-sugar with the corresponding silylated thymine in 4 steps. The final products, including the α and β anomers, were purified using reverse phase HPLC with an appropriate solvent (5% CH3CN/H2O) at a flow rate of 3.0 mL/min. The total elapsed time of synthesis was about 180-200 min from EOB. The α/β anomeric ratio of the compounds was about 1:9, and the radiochemical purity of the product (β-form) was >98% with decay-corrected yields of 25-35%. All radioactive samples were confirmed using co-injection with pure non-radioactive analogues in every step. In the cellular uptake in vitro test of herpes simplex virus-thymidine kinase (HSV1-TK) gene expressed cells, the percent uptake of injected dose (%ID) of L- and D-FMAU was 37.28 and 65.86, respectively after 240 min incubation. However, the relative uptake (MCA-TK/MCA cellular uptake ratio) of L-FMAU was higher than that of D-FMAU (%ID of L-FMAU, 0.36 and D-FMAU, 0.93 after 240 min incubation in MCA cells). This means that L-FMAU will show better specific HSV1-TK gene expressed cell uptake for selective HSV1-TK gene imaging.
한국정보디스플레이학회 2003년도 International Meeting on Information Display
/
pp.1164-1167
/
2003
Recently CRT is getting flatted, As change of CRT trend from normal type to Flat type, the material of Shadow Mask was also changed from AK(Aluminum Killed) to Invar(Fe-Ni alloy) materials Until now we have used just AK(Aluminum Killed) for normal type TV(not flat type), but main raw material of shadow mask component was changed. . However recently Invar(Fe-Ni alloy) materials, which has advantage of Low Thermal Expansion and High Strength, has been developed as well as applying in mass production as CRT's trend has become more flat and fine pitch. As main raw material of shadow mask component was changed, conditions of process were changed. One of them, the importance of pre-etching process (assistant process for developing & etching) is improved because there are so many particles in the pre-etching bath because of Ni compounds. Since the solubility of Ni in pre-etching solvent is very low related to Fe's, so the compounds of Ni happen to make particles.(the solubility of Fe is twenty times Ni's) that particles happen to make process troubles and NG productions so to clear the particles we had to established high cost filtering system, but it is useless. As time goes by the quantity of particles (Ni compounds) was increased because of the capability of filtering system was not enough, the particles was produced continuous in bath, and it make quality problems. Hence we tried to develop the new pre-etching solution to remove the particles (Ni compounds) and to cost down the filtering system's running cost. But in improving the solution we discovered the new pre-etching solution made the PR developing better. In former solution there were three kinds of chemistry (COOH)2 , H2O2 , H2S04 .first the function of (COOH)2 is drilling the surface of Invar, during this mechanism Ni compounds occurred. Second the function of H202 is removing the PR fringe (half UV exposure zone on PR(PVA)), Third the function of H2S04 is the catalysis of (COOH)2 In those, (COOH)2 was the main reason to make the Ni compounds. So to improve the solutions we had to change (COOH)2 to the other material. the chemistry we improved was a complex chemistry based on H2S04 . after using this chemistry the particles problem was disappeared and there was another advantage cut down the PR fringe. The New solution made the function of H202 better so the PR developing improved. To be direct the catalyst of the new solution helped the H202. anyway First thing after change the solution the quality of shadow Mask for flat color TV was improved & the yield also improved. But the more important thing is how to control the new solution. So we accepted the new concept which was the degree of freshness. The degree of freshness is based on non-reacted solution which was 100% ( the degree of freshness) and calculated the melted Ni quantity as time goes by. So we made the gauging liner plot. In conclusion, many companies tried to make fine pitched Shadow Mask ,generally to make quality jump up it needed a lot of cost & persons .in this case the shift of core material made it possible.
전자 통신 산업의 발달로 터치 패널용 강화유리의 사용량이 급격히 증가함에 따라, 판유리 가공 공정 중 유리표면을 보호하기 위한 용도로 사용되는 UV경화형 코팅용액의 사용량이 함께 증가하고 있다. UV경화형 코팅은 열경화형에 비해 경화시간이 매우 짧고, 용제를 사용하지 않는 장점이 있다. 알칼리에 의한 박리 특성을 부여하기 위해 산성 고분자 styrene-acrylic acid copolymer를, 모노머로는 아크릴기가 각각 1개, 2개, 6개인 2-hydroxyl methylacrylate, 1,6-hexanediol diacrylate 그리고 dipentaerythritol hexaacrylate를 사용하였다. 광개시제로는 HP-8, TPO 및 DETX 3종을 조합하여 사용하였고 올리고머로는 bisphenol A epoxy diacrylate를 사용하였다. 본 연구에서는 산성 고분자와 아크릴계 모노머의 함량을 일정하게 유지하면서 광개시제, 올리고머, 그리고 첨가제인 talc의 함량을 변화시키며 실험을 수행하여 광개시제에 따른 제반 물성의 연계성을 고찰하였다. 시험결과 두 가지 이상의 광개시제를 사용해야 경도를 4H 이상 얻을 수 있었고 특히 TPO를 첨가하면 코팅막의 박리 형태를 시트형태로부터 조각형태로 조절하는 것이 가능하였다. 올리고머 함량이 증가하면 경도와 접착성이 증가하지만 박리시간 역시 증가하였고 talc 함량은 20 wt%에서 가장 우수한 결과를 나타내었다.
국내 가공 및 생식용으로 육성된 신품종 포도와 캠벨얼리, MBA 품종의 부위별 레스베라트롤, 카테킨, 에피카테킨, 퀘르세틴, 총 폴리페놀 및 총 안토시아닌 함량을 분석한 결과 품종과 부위에 따라 매우 다양하게 나타났다. 레스베라트롤 함량은 과피에서는 나르샤와 흑보석 품종이, 잎에서는 나르샤 품종이, 송이줄기에서는 MBA 품종이, 전정가지에서는 캠벨얼리, 흑보석 품종이 높았다. 카테킨 함량은 종자와 송이줄기에서 함량이 높았고, 포도 품종 중 종자에서는 MBA 품종이, 송이줄기에서는 MBA, 흑보석 품종이 높은 함량을 나타내었다. 에피카테킨 함량은 종자와 송이줄기, 전정가지에서만 분석되었으며, 포도 품종 중 종자에서는 MBA 품종이, 송이줄기에서는 캠벨얼리, 나르샤 품종이, 전정가지에서는 캠벨얼리 품종에서 높은 함량을 나타내었다. 퀘르세틴 함량은 잎에서만 분석되었으며 포도 품종 중 흑보석과 나르샤 품종에서 높은 함량을 나타내었다. 총 폴리페놀 함량은 과육을 제외한 나머지 부위에서 높은 함량을 나타내었으며, 총 안토시아닌 함량은 유색계 포도 중 캠벨얼리를 제외한 나머지 품종에서 높은 함량을 나태었다. 특히 포도 부위별 생리활성 물질을 분석한 결과 가식부위보다 비과식부위에서 높은 함량을 나타내었다.
Carbon black(이하 CB로 약함) 표면에 존재하는 각종 작용기(-OH, OC,<-COOH)를 n-butyl lithium을 반응활성화제로 활성화시킨 후 아크릴레이트 및 메타크릴레이르 단량체들을 음이온 그라프트 중합하여 CB-그라프트 생성물을 얻었다. 이 CB-그라프트 생성물을 비용매를 이용한 침전법과 원심분리기를 사용하여 호모폴리머를 분리시켜 반응시간과 온도에 따른 그라프트 효율 등을 구한 결과, CB-polyacrylates의 경우 그라프트율이 20~30% 정도로 낮았지만 CB-polymethacrylate의 경우 150~200% 정도의 매우 높은 그라프트율의 CB- grafted polymer를 얻을 수 있었다. 또한, 각 반응온도에서 CB와 단량체들의 음이온 중합은 대체로 1~2시간 정도에서 평형상태를 이루었으며, 온도가 높아짐에 따라 전환율과 그라프트율은 약간의 증가를 보였다. 콜로이드 분산성 시험을 한 결과 열건조 전에는 각 호모폴리머의 양용매 중에서 매우 안정한 분산성을 나타냈으며, 열건조 후에도 CB-polymethacrylate의 경우에는 대부분의 polymethacrylate 양용매에 대해 매우 양호한 안정성을 보였다. CB 표면에서의 그라프트 중합체의 확인은 적외선 스펙트럼에 의해 행하였다. Four-probe 방법에 의한 CB-grafted polymer의 저항값 측정에서는 그라프트율이 높을수록 저항값이 증가함을 알 수 있었다.
Background: Most northeast Thai vegetables may play roles in human health by acting as antioxidant and anticancer agents. Recent study showed that Cratoxylum formosum subsp. pruniflorum (Kurz.) Gogel. (Teawdang) could inhibit growth of liver cancer cell lines. Cervical cancer, which has human papilloma virus as its main cause, is found at high incidence in Thailand. Due to increasing drug resistance, searches for potential anticancer compounds from natural source are required. Therefore, our purpose was to evaluate the cytotoxicity of Teawdang extracts in cervical cancer cell lines. Materials and Methods: Teawdang edible parts, purchased from Khon Kaen market during July-October 2013 was extracted with organic solvent. Phenolic profiles of crude hexane (CHE), ethyl acetate (CEE), methanol (CME) and water (CWE) extracts were performed by high performance liquid chromatographic (HPLC) techniques. Their cytotoxic effects on cervical cancer cells were investigated with HPV-non infected (C-33A) and HPV-infected (HeLa and SiHa) cell lines. Results: HPLC profiles showed that all crude extracts contained caffeine, ferulic acid and resveratrol. CME and CEE had high contents of gallic acid and quercetin. Catechin was found only in CWE. Cytotoxicity test showed that CEE had the lowest IC50 on HeLa ($143.18{\pm}13.35 {\mu}g/mL$) and SiHa cells ($106.45{\pm}15.73{\mu}g/mL$). C-33A cells were inhibited by CWE ($IC50=130.95{\pm}3.83{\mu}g/mL$). Conclusions: There were several phenolic compounds in Teawdang extracts which may have cytotoxic effects on cervical cancer cell lines. Investigation of these bioactive compounds as new sources of anticancer agents is recommended.
본 연구에선 바이오부탄올 생산을 위한 추출발효에 적용하고자 부탄올 추출에 효율적이고 미생물에 독성을 주지 않는 적합한 추출용매를 선정하고자 하였다. 추출 용매를 선정하기 위하여 부틸 부틸레이트, oleyl alcohol, 친환경 용매인 소수성 이온성 액체 2 종류를 이용하여 분배계수를 구한 결과, 부틸 부틸레이트와 oleyl alcohol이 높은 부탄올 분배계수를 나타내었고 부탄올 농도 1-20 g/L와 pH 4-5.5 범위에서 80% 이상의 우수하고 안정적인 추출효율을 나타내었다. 미생물에 독성이 없는 oleyl alcohol를 사용한 회분식 추출발효에서는 추출을 하지 않은 회분식 배양보다 11% 향상된 부탄올 생산을 보였다 (11.2 g/L vs. 12.4 g/L). 이는 배양액 내의 부탄올이 추출되어 배양액내의 부탄올 농도가 낮게 유지됨으로써 부탄올 독성 영향이 감소되었고, 이로 인해 향상된 부탄올 생산이 이루어진 것으로 판단된다. Oleyl alcohol:부틸부티레이트 부피비를 9:1로 혼합한 용매를 사용했을 경우는 미생물 생장에는 저해 영향이 미미했으나 부탄올 생산은 추출발효를 하지 않은 회분식 배양에 비해 60%에 그쳤다. 부틸부티레이트를 20% 이상 미생물 생장에 심각한 저해를 주는 것으로 관찰되어졌다. 본 연구를 통해, 실험에 사용된 4가지 추출 용매 중에서 oleyl alcohol이 미생물에게 독성영향을 끼치지 않으면서 부탄올 추출을 효율적으로 할 수 있음을 알 수 있었고, oleyl alcohol을 바이오 부탄올 연속 추출발효에 적용한다면 향상된 부탄올 생산성을 얻을 수 있을 것으로 기대된다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.