• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 봄 학술논문 발표대회
• /
• pp.45-46
• /
• 2022

In this study, ultrasonic pulse velocity is compared on non-sintered hwangto concrete(NHTC) and normal concrete(NC) at ages. Strength of specimens set up 30MPa. Cement is replaced with 15 and 30% non-sintered hwangto. UPV is tested at 1, 3, 7, 28, 56, 91 days. As a result, UPV increases as the age and strength increase, but decreases as the non-sintered hwangto replacement increases. Although ultrasonic pulse velocity of NHTC was 72% lower than NC, after that, difference tends to decrease

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.39-40
• /
• 2023

In this study, the compressive strength development was analyzed at early ages of concrete specimens admixed with non-sintered hwangto to reduce the CO₂ emissions generated during cement production. The W/B of the specimens was set at 0.41, the percentage of non-sintered hwangto admixture was set at three levels of 15, 30, and 45%, and the compressive strength were measured at 1, 3, 7, and 28 days. The results showed that the compressive strength decreases as the percentage of non-sintered hwangto increases, but the strength development rate increases, and the NHTC41-15 test specimen developed a compressive strength close to NC41 at 28 days.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 가을학술발표대회논문집
• /
• pp.273-274
• /
• 2023

In this study, ultrasonic pulse velocity was analyzed to evaluate the high-temperature mechanical properties of concrete mixed with non-sintered hwangto. The W/B of the specimens was set at 0.41, the percentage of non-sintered hwangto admixture was set at two levels of 15,30%. The target temperature of the specimen is set to 6 levels of 20, 100, 200, 300, 500, 700 ℃, and the heating rate is set to 1℃/min. The result showed that the amount of non-sintered hwangto incorporated into the concrete tends to results in lower compressive strength. Ultrasonic pulse velocity showed similar trends, but differed in some areas.

• 한국건설순환자원학회논문집
• /
• 제11권2호
• /
• pp.105-111
• /
• 2023

본 연구에서는 초기 재령에서 NSH(Non-sintered Hwangto) 치환율에 따른 고강도 콘크리트의 역학적 특성을 평가하였다. NSH의 치환율은 15 % 및 30 %로 설정했다. 평가 항목은 압축강도와 UPV(Ultrasonic pulse velocity)로 설정하였으며, 최종적으로 UPV분석을 통해 압축강도 예측 방정식을 제안하였다. 압축강도와 UPV에서는 NSH 치환율이 증가할수록 낮은 강도 및 UPV를 보였다. 또한 압축강도와 UPV의 상관관계 분석 결과, 상관계수(R2)는 NC33(Normal concrete)은 0.99, NSHC(Non-sintered Hwangto Concrete)33-15는 0.97, 그리고 NSHC33-30은 0.94로 높은 상관관계를 나타냈다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 가을학술발표대회논문집
• /
• pp.159-160
• /
• 2023

Recently, interest in reducing cement has been growing. Hwangto, an eco-friendly material, has advantages such as air purification effect and humidity control, but when used, accidents such as form collapse may occur due to low strength and reduced durability. In order to quantitatively evaluate the timing of mold demolding, we would like to evaluate the timing of mold demolding through correlation with compressive strength using ultrasonic pulse velocity. As a result, the time at which 5 MPa is developed is after 20 hours for the test specimen of W/B 41 , in the case of W/B 33, NC33 and HTC33-15 were equally expressed at 12 hours, and HTC33-30 was expressed at 16 hours.

• 한국건축시공학회지
• /
• 제23권1호
• /
• pp.35-43
• /
• 2023

본 연구에서는 시멘트 대체 재료로서 비소성 황토(NHT)를 혼합한 콘크리트의 역학적 특성을 평가하였으며, 초음파 속도 분석을 통한 콘크리트의 강도 예측식을 제안하였다. 혼합된 NHT의 시멘트 치환율을 0, 15 및 30%로 설정하였으며, 시멘트 및 NHT의 분체량에 대한 영향을 평가하기 위해 목표 강도를 30 및 45MPa로 설정하였다. 평가한 항목은 압축 강도, 초음파 속도 및 탄성계수로 설정하였으며, 재령 1, 3, 7 및 28일마다 설정한 항목을 측정하였다. 실험 결과, NHT 치환율이 증가함에 따라 역학적 특성은 감소하는 경향을 보였으며. 또한, 압축 강도와 초음파 속도의 상관관계 분석 결과 상관계수(R²)는 NHT를 혼합한 콘크리트의 경우 약 0.95로 높은 관계성을 보였다.