• Title/Summary/Keyword: non-local conditions

Search Result 245, Processing Time 0.029 seconds

Verification of the Planetary Boundary Layer Height Calculated from the Numerical Model Using a Vehicle-Mounted Lidar System (차량탑재 라이다 시스템을 활용한 수치모델 행성경계층고도 검증)

  • Park, Chang-Geun;Nam, Hyoung-Gu
    • Korean Journal of Remote Sensing
    • /
    • v.36 no.5_1
    • /
    • pp.793-806
    • /
    • 2020
  • In this study,for YSU (Yonsei University), MYJ(Mellor-Yamada-Janjic), ACM2 (Asymmetric Convective Model), and BouLac (Bougeault-Lacarrere) PBL schemes, numerical experiments were performed for the case period (June 26-30, 2014). The PBLH calculated by using the backscatter signal produced by the mobile vehicle-mounted lidar system (LIVE) and the PBLH calculated by the prediction of each PBL schemes of WRF were compared and analyzed. In general, the experiments using the non-local schemes showed a higher correlation than the local schemes for lidar observation. The standard deviation of the PBLH difference for daylight hours was small in the order of YSU (≈0.39 km), BouLac (≈0.45 km), ACM2 (≈0.47 km), MYJ (≈0.53 km) PBL schemes. In the RMSE comparison for the case period, the YSU PBL scheme was found to have the highest precision. The meteorological lider mounted on the vehicle is expected to provide guidance for the analysis of the planetary boundary layer in a numerical model under various weather conditions.

Experimental investigation on flexural behaviour of HSS stud connected steel-concrete composite girders

  • Prakash, Amar;Anandavalli, N.;Madheswaran, C.K.;Lakshmanan, N.
    • Steel and Composite Structures
    • /
    • v.13 no.3
    • /
    • pp.239-258
    • /
    • 2012
  • In this paper, experimental investigations on high strength steel (HSS) stud connected steel-concrete composite (SCC) girders to understand the effect of shear connector density on their flexural behaviour is presented. SCC girder specimens were designed for three different shear capacities (100%, 85%, and 70%), by varying the number of stud connectors in the shear span. Three SCC girder specimens were tested under monotonic/quasi-static loading, while three similar girder specimens were subjected to non-reversal cyclic loading under simply supported end conditions. Details of casting the specimens, experimental set-up, and method of testing, instrumentation for the measurement of deflection, interface-slip and strain are discussed. It is found that SCC girder specimen designed for full shear capacity exhibits interface slip for loads beyond 25% of the ultimate load capacity. Specimens with lesser degree of shear connection show lower values of load at initiation of slip. Very good ductility is exhibited by all the HSS stud connected SCC girder specimens. It is observed that the ultimate moment of resistance as well as ductility gets reduced for HSS stud connected SCC girder with reduction in stud shear connector density. Efficiency factor indicating the effectiveness of high strength stud connectors in resisting interface forces is estimated to be 0.8 from the analysis. Failure mode is primarily flexure with fracturing of stud connectors and characterised by flexural cracking and crushing of concrete at top in the pure bending region. Local buckling in the top flange of steel beam was also observed at the loads near to failure, which is influenced by spacing of studs and top flange thickness of rolled steel section. One of the recommendations is that the ultimate load capacity can be limited to 1.5 times the plastic moment capacity of the section such that the post peak load reduction is kept within limits. Load-deflection behaviour for monotonic tests compared well with the envelope of load-deflection curves for cyclic tests. It is concluded from the experimental investigations that use of HSS studs will reduce their numbers for given loading, which is advantageous in case of long spans. Buckling of top flange of rolled section is observed at failure stage. Provision of lips in the top flange is suggested to avoid this buckling. This is possible in case of longer spans, where normally built-up sections are used.

A Study on Disaster Prevention Activities at the Village Level to Preserve the Historical Environment: Focusing on Employee Residence Area in Soje-dong, Daejeon (역사환경 보존을 위한 마을단위 방재 활동 연구: 대전 소제동 관사촌을 중심으로)

  • Lee, Sanghee
    • Journal of Internet of Things and Convergence
    • /
    • v.7 no.4
    • /
    • pp.69-75
    • /
    • 2021
  • This study investigated the status of disaster response, focusing on modern architecture. The modern architecture is drawing more attention and being more used in the local community among the architectural heritage in downtown collective. The railway employee residence area in Soje-dong, Daejeon is a collective building group, and the efforts to evaluate and preserve its historical, cultural, and architectural values have been underway. However, the area is now an undesignated cultural property that does not receive institutional protection. It carries significance in preserving it as a collective building group. Yet, since the main structure is made of wood, the risk of being destroyed by fire or disaster is high, and disaster prevention measures are insufficient. Therefore, this study examined the structural and non-structural conditions such as the arrangement and architectural characteristics of official residence buildings, and looked into measures of the construction of a disaster prevention system and residents' participation. To preserve the urban historical environment created as a collective architectural heritage, it is necessary that the area reinforces its own disaster prevention capabilities, such as establishing an effective disaster prevention system considering village characteristics, strengthening disaster prevention capabilities based on residents' participation, and forging formal and informal governance in the local community.

A Study on the Users Perception of Public Library Services in Depopulation Areas: Focusing on Uiseong-gun (인구감소지역 공공도서관 서비스를 위한 이용자 인식조사 연구 - 경북 의성군을 중심으로 -)

  • Kim, Sin-Young;Cha, Sung-Jong
    • Journal of Korean Library and Information Science Society
    • /
    • v.53 no.3
    • /
    • pp.95-117
    • /
    • 2022
  • This study was conducted as basic research for establishing a mid to long term development plan for libraries in Uiseong-gun, designated as a depopulated area. First, the social, cultural, and environmental characteristics of Uiseong-gun were analyzed and compared with the library infrastructure of depopulation areas similar in size with Uiseong-gun. In addition, a survey was conducted on the perception of users to understand the usage status of libraries, satisfaction with services and improvement plans, non-use factors, and demands for new libraries. Based on this process, the direction of Uiseong-gun library policy was presented. Specifically, four strategic directions for the development of libraries (future orientation, community revitalization, service specialization of the information poor, enhancement of local humanities and spiritual culture) and five key service tasks (building library brand, implementing innovative spaces and services, expanding library functions for improvement of settlement conditions of residents, developing and providing services for the elderly reflecting local characteristics, promoting reading culture) were derived. The proposed core tasks focused on future-oriented library services to overcome the limitations of a population decrease area and develop the potential of Uiseong-gun.

Stakeholder Awareness of Rural Spatial Planning Data Utilization Based on Survey (농촌공간계획 데이터 수급에 대한 이해당사자 인식조사)

  • Zaewoong Rhee;Sang-Hyun Lee;Sungyun Lee;Jinsung Kim;Rui Qu;Seung-Jong Bae;Soo-Jin Kim;Sangbum Kim
    • Journal of Korean Society of Rural Planning
    • /
    • v.29 no.3
    • /
    • pp.25-37
    • /
    • 2023
  • According to the 「Rural Spatial Reconstruction and Regeneration Support Act」, enacted on March 29, 2024, all local governments are required to establish a 'Rural Spatial Reconstruction and Regeneration Plan' (hereinafter referred to as the 'Rural Spatial Plan'). In order for the 'Rural Spatial Plan' to be appropriately established, this study analyzed the supply and demand of spatial data from the perspective of user stakeholders and derived implications for improving rural spatial planning data utilization. In conclusion, three key recommendations come from this result. Firstly, it is necessary to establish an integrated DB for rural spatial planning data. This can solve the problem of low awareness of scattered data-providing websites, reduce the processing time of non-GIS data, and reduce the time required to acquire data by securing the availability of data search and download. In particular, research should be conducted on the establishment of a spatial analysis simulation system to support stakeholders' decision-making, considering that many stakeholders have difficulty in spatial analysis because spatial analysis techniques were not actively used in rural projects before the implementation of the rural agreement system in 2020. Secondly, research on how to improve data acquisition should be conducted in each data sector. The data sector group with the lowest ease of receiving are 'Local Community Domain', 'Changes in Domestic and International Conditions', and 'Provision and Utilization of Daily Life Services'. Lastly, in-depth research is needed on how to raise each rural spatial planning data supply stakeholder to the position of player. Stakeholders of 'University Institutions' and 'Public Enterprises and Research Institutes' should give those who participate in the formulation of rural spatial plans access to the raw data collected for public work. Stakeholders of 'Private company' need to come up with realistic measures to build a data pool centered on consultative bodies between existing private companies and then prepare a step-by-step strategy to fully open it by participating various stakeholders. In order to induce 'Village Residents and Associations' stakeholders to play a leading role as owners and producers of data, personnel should be trained to collect and record data related to the village. In addition, support measures should be prepared to continue these activities.

호스피스 전달체계 모형

  • Choe, Hwa-Suk
    • Korean Journal of Hospice Care
    • /
    • v.1 no.1
    • /
    • pp.46-69
    • /
    • 2001
  • Hospice Care is the best way to care for terminally ill patients and their family members. However most of them can not receive the appropriate hospice service because the Korean health delivery system is mainly be focussed on acutly ill patients. This study was carried out to clarify the situation of hospice in Korea and to develop a hospice care delivery system model which is appropriate in the Korean context. The theoretical framework of this study that hospice care delivery system is composed of hospice resources with personnel, facilities, etc., government and non-government hospice organization, hospice finances, hospice management and hospice delivery, was taken from the Health Delivery System of WHO(1984). Data was obtained through data analysis of litreature, interview, questionairs, visiting and Delphi Technique, from October 1998 to April 1999 involving 56 hospices, 1 hospice research center, 3 non-government hospice organizations, 20 experts who have had hospice experience for more than 3 years(mean is 9 years and 5 months) and officials or members of 3 non-government hospice organizations. There are 61 hospices in Korea. Even though hospice personnel have tried to study and to provide qualified hospice serices, there is nor any formal hospice linkage or network in Korea. This is the result of this survey made to clarify the situation of Korean hospice. Results of the study by Delphi Technique were as follows: 1.Hospice Resources: Key hospice personnel were found to be hospice coordinator, doctor, nurse, clergy, social worker, volunteers. Necessary qualifications for all personnel was that they conditions were resulted as have good health, receive hospice education and have communication skills. Education for hospice personnel is divided into (i)basic training and (ii)special education, e.g. palliative medicine course for hospice specialist or palliative care course in master degree for hospice nurse specialist. Hospice facilities could be developed by adding a living room, a space for family members, a prayer room, a church, an interview room, a kitchen, a dining room, a bath facility, a hall for music, art or work therapy, volunteers' room, garden, etc. to hospital facilities. 2.Hospice Organization: Whilst there are three non-government hospice organizations active at present, in the near future an hospice officer in the Health&Welfare Ministry plus a government Hospice body are necessary. However a non-government council to further integrate hospice development is also strongly recommended. 3.Hospice Finances: A New insurance standards, I.e. the charge for hospice care services, public information and tax reduction for donations were found suggested as methods to rise the hospice budget. 4.Hospice Management: Two divisions of hospice management/care were considered to be necessary in future. The role of the hospice officer in the Health & Welfare Ministry would be quality control of hospice teams and facilities involved/associated with hospice insurance standards. New non-government integrating councils role supporting the development of hospice care, not insurance covered. 5.Hospice delivery: Linkage&networking between hospice facilities and first, second, third level medical institutions are needed in order to provide varied and continous hospice care. Hospice Acts need to be established within the limits of medical law with regards to standards for professional staff members, educational programs, etc. The results of this study could be utilizes towards the development to two hospice care delivery system models, A and B. Model A is based on the hospital, especially the hospice unit, because in this setting is more easily available the new medical insurance for hospice care. Therefore a hospice team is organized in the hospital and may operate in the hospice unit and in the home hospice care service. After Model A is set up and operating, Model B will be the next stage, in which medical insurance cover will be extended to home hospice care service. This model(B) is also based on the hospital, but the focus of the hospital hospice unit will be moved to home hospice care which is connected by local physicians, national public health centers, community parties as like churches or volunteer groups. Model B will contribute to the care of terminally ill patients and their family members and also assist hospital administrators in cost-effectiveness.

  • PDF

Development Process of Agriculture And Technology -A Case Study of Korea

  • Gajendra-Singh;Ahn, Duck-Hyun
    • Proceedings of the Korean Society for Agricultural Machinery Conference
    • /
    • 1993.10a
    • /
    • pp.109-118
    • /
    • 1993
  • Development process of agricultural technology has been studied with a case study of Korean agriculture. Technological is considered as a transformer of inputs into outputs and hence technological appropriateness, an important aspect of agricultural development strategies, is considered as a dynamic concepts. Considering the concept of agricultural system as a delivery system for providing essential materials and services to producers and consumers, it has been divided into two major groups of dimensions vis. external challenge dimensions and internal response dimensions. Market, investment and agro-ecosystem constitute the external challenge dimensions : whereas trade , technology as well as production and resources allocation constitute internal response dimensions. The system manager is responsible for maintaining equilibrium in the mentioned six sub-systems. Two kinds of alternatives paths of technological development viz. land saving technology and labour saving technolog have been studied. Technology is considered as a combination of four basic components viz. facilities, abilities, facts and frameworks. Adoption of innovation in agriculture depends on profitability, awareness, risk aversion, financial capacity, institutional infrastructure, availability of physical inputs and adaptability to the local conditions. For a cast study of Korea, changes in the agricultural system through external challenge dimensions are investigated. The impacts of industrialization on agro-ecosystem reported are shift of labour from the agricultural sector to non-agricultural sectors and continuously increasing demand of farm the agricultural sector to non-agricultural sectors accompanied by increase in land prices. The impacts on the commodity market discussed are shift in demand from rice, barley and other cereals to meat , dairy products and vegetables : and increasing in supply capacity of agricultural inputs. The process of agricultural development from 1962 to 19 1 9 (i.e. from start of the first to the end of the sixth five year plan) are also discussed in details with several policy measures taken. The trend of agricultural income and productivity are also analyzed. The main cause of increase in the agricultural income is considered as increase in labour productivity. The study revealed that during the span of 1965-88, holding size has not changed significantly, but both the land and labour productivity increased and so did the agricultural income. R&D activities in Korea have changed over time in three stages vix. import of improved technology, localization by adaptive research and technological mastery. For the new technology to be made affordable to farmers, policy measures like fertilizer and food grain exchange system, dual price system in rice and barely and loan for machinery were strengthened.

  • PDF

Evaluation of Clinical Usefulness of EIS(Electro Interstitial Scan) (EIS(Electro Interstitial Scan) 방법의 임상적 유효성 연구)

  • Kim, Soochan;Bae, Jang-Han;Jun, Min-Ho;Kim, Jaeuk U.
    • Journal of the Institute of Electronics and Information Engineers
    • /
    • v.52 no.12
    • /
    • pp.124-133
    • /
    • 2015
  • Electro interstitial scan shows potential as a non-invasive screening method. It can discriminate some diseases based on electric current response to induce low intensity direct current to limbs or local area of body. DDFAO was invented in France and it is claimed that multi-channel EIS(Electro Interstitial Scan) is useful for various diseases, especially, diagnoses of endocrine system such as diabetics are very effective. In this study, we verified the repeatability and sensitivity of DDFAO by using a RC phantom model and its clinical usefulness using data obtained from normal and diabetes subject groups. As a result, it showed the repeatability and the output change according to change of phantom characteristic, but it was hard to distinguish normal and patient groups non-invasively with just six surface electrodes of DDFAO. The repeatability and the clinical accuracy was not sufficient for screening or diagnostic purposes, as well. In spite of the results with low repeatability and accuracy conducted in this study, we still need further investigations to improve the EIS-based measurement method; EIS is very convenient and simple and it shows potential as a screening tool of the whole body health conditions rather than localized disease diagnosis.

A Comparative Study on the Physical, Psychological, and Social Well-being of Elderly Women in Rural Areas Depending on their Participation in Swimming Activities (수영 활동 참여에 따른 농촌 지역 여성노인의 신체적·정신적·사회적 건강상태 비교)

  • Kim, Ji-Young;Kim, Hyang-Soo
    • Journal of Convergence for Information Technology
    • /
    • v.11 no.2
    • /
    • pp.64-72
    • /
    • 2021
  • The purpose of this study is to compare the physical, psychological, and social well-being of elderly women living in rural areas depending on their participation in swimming activities. Study sample consisted of 41 elderly women residing in the G province of C region who participated in swimming activities at least 3 times per week for one or more years, and 43 elderly women of the same area who did not participate in swimming activities. Data was collected over the course of 6 weeks. Analysis of the data showed that there are significant differences between participants and non-participants of swimming activities in their physical well-being(pain, flexibility), psychological well-being(perceived health status, depression), and their social well-being(strengthened interpersonal relations). In other words, participants of swimming activities, compared to non-participants, were in better physical, psychological, and social conditions. Thus, active encouragement and support must be in place for elderly women in rural areas to engage in swimming activities by utilizing local swimming facilities.

The heat transfer characteristics of viscoelastic non-newtonian fluids in the entrance region of circular tube flows (원형관속을 유동하는 점탄성 유체의 입구 영역 열전달 특성에 관한 연구)

  • 엄정섭;황태성;유상신
    • Transactions of the Korean Society of Mechanical Engineers
    • /
    • v.13 no.5
    • /
    • pp.1032-1043
    • /
    • 1989
  • The heat transfer characteristics of the drag reducing polymer solutions are investigated experimentally in the thermal entrance region of circular tube flows. Fluids used in experiments are the aqueous solutions of high molecular polymer, polyacrylamide Separan AP-273 and the range of polymer concentrations is from 20 to 1000 wppm. Two stainless steel tubes with inside diameter 8.5mm(L/D=712) and 10.3mm(L/D=1160) are used for the heat transfer flow loops. The flow loop is set up to measure friction factors and heat transfer coefficients of test sections in two different modes; the recirculating flow system and once-through flow system. The test tubes are heated directly by electricity to apply the constant heat flux boundary conditions to the wall. Three different types of adaptors are used to observe the effects of the upstream flow conditions of the heat transfer test sections. The viscosity and characteristic relaxation time of the test fluids circulating in the flow system are measured by the capillary tube viscometer and falling ball viscometer at regular time intervals. The installed adaptors exhibit slight effect on the entrance heat transfer of Newtonian fluid. However, no noticeable effects are observed for the entrance heat transfer of the drag reducing fluids. The order of magnitude of the thermal entrance lengths of the drag reducing fluids which follow the minimum friction asymptote is much longer than that of Newtonian fluids in turbulent flows. A new dimensionless parameter, the viscoelastic Graetz number, is defined and all the experimental data are recasted in terms of the viscoelastic Graetz number. The local Nusselt number of the viscoelastic fluids is represented as a function of flow behavior index n and the viscoelastic Graetz number. As degradation continues the viscosity and the characteristic relaxation time of the testing fluids decrease. Weissenberg number defined by the relaxation time and D/V appears to be a proper dimensionless parameter in describing degradation effects on heat transfer of the viscoelastic fluids.