• 대한약침학회지
• /
• 제18권4호
• /
• pp.38-44
• /
• 2015

Objectives: Radix Ginseng has been used for thousands of years to treat a wide variety of diseases. Radix ginseng has also been used as a traditional medicine for boosting Qi energy and tonifying the spleen and lungs. Traditionally, its effect could be obtained orally. Nowadays, a new method, the injection of herbal medicine, is being used. This study was performed to investigate the single-dose intravenous toxicity of water-soluble ginseng pharmacopuncture (WSGP) in Sprague-Dawley (SD) rats. Methods: All experiments were carried out at Biotoxtech, an institute authorized to perform non-clinical studies under the regulation of Good Laboratory Practice (GLP). At the age of six weeks, 40 SD rats, 20 male rats and 20 female rats, were allocated into one of 4 groups according to the dosages they would receive. The WSGP was prepared in the Korean Pharmacopuncture Institute under the regulation of Korea-Good Manufacturing Practice (K-GMP). Dosages of WSGP were 0.1, 0.5 and 1.0 mL/animal for the experimental groups, and normal saline was administered to the control group. The rat's general conditions and body weights, the results of their hematological and biochemistry tests, and their necropsy and histopathological findings were investigated to identify the toxicological effect of WSGP injected intravenously. The effect was examined for 14 days after the WSGP injection. This study was performed under the approval of the Institutional Animal Ethics Committee of Biotoxtech. Results: No deaths were found in this single-dose toxicity test on the intravenous injection of WSGP, and no significant changes in the rat's general conditions and body weights, the results on their hematological and biochemistry test, and their necropsy findings were observed during the test. The local area of the injection site showed minial change. The lethal dose was assumed to be over 1.0 mL/animal in both sexes. Conclusion: These results indicate that WSGP is safe at dosages up to 1 mL/animal.

• 수산해양기술연구
• /
• 제48권2호
• /
• pp.155-164
• /
• 2012

The CSR rule was defined by IACS as the unified rule for a commercial ship like a bulk carrier and a tanker. It have been required more strict conditions for various parts like loading conditions, the local and girder strength, fatigue strength, FEM for the ship rule. It was changed in many parts of the ship rules. In this paper, the mid-parts of 17.5K DWT bulk carrier were optimized by the CSR rule. On the other hand, the modified artificial life algorithms with multi-object functions were developed for optimizing the scantling. It is possible to find multi-global optimum solutions in the multi-object functions. And it is faster and efficient than the artificial life algorithm. First, to be optimizing the scantling and the weight by CSR rule, that is calculated by the CSR rule. The next, the result is re-calculated by the modified artificial life algorithm with multi-object functions. The optimized results which are satisfied with the CSR rule like the minimum size and the thickness of stiffener and the minimum cost have been searched by the optimizing algorithm. And the results have been compared with the non-optimizing results.

• Structural Engineering and Mechanics
• /
• 제24권6호
• /
• pp.647-664
• /
• 2006

In this study, an improved finite element formulation with a scheme of solution for the large deflection analysis of inextensible prismatic and nonprismatic slender beams is developed. For this purpose, a three-noded Lagrangian beam-element with two dependent degrees of freedom per node (i.e., the vertical displacement, y, and the actual slope, $dy/ds=sin{\theta}$, where s is the curved coordinate along the deflected beam) is used to derive the element stiffness matrix. The element stiffness matrix in the global xy-coordinate system is achieved by means of coordinate transformation of a highly nonlinear ($6{\times}6$) element matrix in the local sy-coordinate. Because of bending with large curvature, highly nonlinear expressions are developed within the global stiffness matrix. To achieve the solution after specifying the proper loading and boundary conditions, an iterative quasi-linearization technique with successive corrections are employed considering these nonlinear expressions to remain constant during all iterations of the solution. In order to verify the validity and the accuracy of this study, the vertical and the horizontal displacements of prismatic and nonprismatic beams subjected to various cases of loading and boundary conditions are evaluated and compared with analytic solutions and numerical results by available references and the results by ADINA, and excellent agreements were achieved. The main advantage of the present technique is that the solution is directly obtained, i.e., non-incremental approach, using few iterations (3 to 6 iterations) and without the need to split the stiffness matrix into elastic and geometric matrices.

• 한국환경과학회지
• /
• 제28권10호
• /
• pp.851-861
• /
• 2019

In this study, we performed a sediment elution experiment to evaluate water quality in terms of phosphorus, as influenced by the dissolved oxygen consumed by sediments. Three separate model column treatments, namely, raw, calcined, and sonicated oyster shell powders, were used in this experiment. Essential phosphorus fractions were examined to verify their roles in nutrient release from sediment based on correlation analyses. When treated with calcined or sonicated oyster shell powder, the sediment-water interface became "less anaerobic," thereby producing conditions conducive to partial oxidation and activities of aerobic bacteria. Sediment Oxygen Demand (SOD) was found to be closely correlated with the growth of algae, which confirmed an intermittent input of organic biomass at the sediment surface. SOD was positively correlated with exchangeable and loosely adsorbed phosphorus and organic phosphorus, owing to the accumulation of unbound algal biomass-derived phosphates in sediment, whereas it was negatively correlated with ferric iron-bound phosphorus or calcium fluorapatite-bound phosphorus, which were present in the form of "insoluble" complexes, thereby facilitating the free migration of sulfate-reducing bacteria or limiting the release from complexes, depending on applied local conditions. PCR-denaturing gradient gel electrophoresis revealed that iron-reducing bacteria were the dominant species in control and non-calcined oyster shell columns, whereas certain sulfur-oxidizing bacteria were identified in the column treated with calcined oyster powder.

• Tribology and Lubricants
• /
• 제35권2호
• /
• pp.99-105
• /
• 2019

This study presents an experimental investigation of the wear and oxidation of the bristles of a brush seal in a super-heated steam environment. We construct a model reflecting normal force and radial interference to predict the amount of wear. To monitor the volume loss of the bristle induced by the swirl phenomenon of the rotor, we measure the clearance between the rotor and the brush seal by using a non-contact 3-D device. We calculate the area by using the area-wise measurement method. Considering the obvious brush seal wear variables, we use two disks with different roughness($Ra=0.1{\mu}m$ and $100{\mu}m$) to determine the effect of roughness on wear. Considering an actual steam turbine, we utilize a steam generator and super-heater to generate a working fluid (0.95MPa, 523.15K) that has high kinetic energy. We observe the abrasion of the bristles in the hot steam environment through a scanning electron microscope image. This study also conducted energy dispersive X-ray (EDX) analysis for a qualitative evaluation of local chemistry. The results indicate that the wear and elimination of bristles occur on the disk with high roughness, and the weight increases due to oxidation. Furthermore these results, reveal that the bristle oxidation is accelerated more under super-heated steam conditions than under conditions without steam.

• 한국응급구조학회지
• /
• 제27권2호
• /
• pp.91-111
• /
• 2023

Purpose: This study aims to compare 119 emergency medical services (EMS) in South Korea and Japan to provide essential data for EMS improvement in South Korea. Methods: Recent data and regulations on firefighting and EMS in South Korea and Japan were analyzed and compared. Results: South Korea follows a centralized approach to EMS, whereas Japan operates with autonomous bodies that establish their own criteria. Japan considers more regional variables than South Korea. In South Korea, there are shortages in fire station deployment among the 119 emergency medical resources in certain regions, leading to significant regional disparities. South Korea has a larger population served by its 119 emergency medical resources with a higher workload and dispatch numbers than Japan. The percentage of non-transported patients among the total number of dispatches was higher in South Korea. Conclusion: Increasing the number of medical professionals and ambulances per population to the level of Japan to reflect local conditions and include various underlying variables such as daytime population, aging, and emergency dispatch conditions in the deployment of 119 emergency resources, and to reduce the deployment gap between regions, will contribute to improving the performance of the South Korea EMS system.

• 대한방사선기술학회지:방사선기술과학
• /
• 제47권1호
• /
• pp.39-48
• /
• 2024

In this study, we optimized the FNLM algorithm through a simulation study and applied it to a phantom scanned by low-dose CT to evaluate whether the FNLM algorithm can be used to obtain improved image quality images. We optimized the FNLM algorithm with MASH phantom and FASH phantom, which the algorithm was applied with MATLAB, increasing the smoothing factor from 0.01 to 0.05 with increments of 0.001 and measuring COV, RMSE, and PSNR values of the phantoms. For both phantom, COV and RMSE decreased, and PSNR increased as the smoothing factor increased. Based on the above results, we optimized a smoothing factor value of 0.043 for the FNLM algorithm. Then we applied the optimized FNLM algorithm to low dose lung CT and lung CT under normal conditions. In both images, the COV decreased by 55.33 times and 5.08 times respectively, and we confirmed that the quality of the image of low dose CT applying the optimized FNLM algorithm was 5.08 times better than the image of lung CT under normal conditions. In conclusion, we found that the smoothing factor of 0.043 among the factors of the FNLM algorithm showed the best results and validated the performance by reducing the noise in the low-quality CT images due to low dose with the optimized FNLM algorithm.

• 한국건설순환자원학회논문집
• /
• 제9권4호
• /
• pp.506-513
• /
• 2021

철근콘크리트 구조물의 내구성 및 안전성은 콘크리트의 균열 및 강도와 더불어 철근의 배근상태나 콘크리트 피복 두께에 크게 의존한다. 콘크리트 내에 매립되어 있는 철근 정보를 정확히 파악하는 방법엔 국부 파괴법과 비파괴 철근 탐사 시험이 있다. 일반적으로 부재 손상을 최소화하기 위해 비파괴 철근 탐사 시험을 통해 파악하며, 비파괴 철근 탐사 시험에는 전자파레이더법, 전자기유도법, 방사선법 등이 있다. 콘크리트의 함수율과 온도는 콘크리트의 전기적 특성인 유전율에 영향을 미쳐 비파괴 철근 탐사 시험 결과에 간섭을 방생시킨다. 따라서 본연구에서는 콘크리트의 표면수율과 온도에 따라 전자파레이더법과 전자기유도법이 받는 영향을 분석하였다. 장비와 기술의 발달로 원리와 상관없이 24℃ 시험체에서는 평균 오차율이 5% 이하로 나타났으며 특히 전자기유도법의 경우 매우 높은 정확성을 갖는 것을 확인하였다. 전자파레이더법은 습윤상태보다 건조상태에서 상대적으로 오차율이 작은 특성을 나타내었으며, 고온에서는 다소 높은 오차율이 나타났다. 탐사 대상의 온도가 낮고 건조한 경우 전자파레이더법을 적용하고, 탐사 대상이 습윤상태이거나 고온에서는 전자기유도법을 사용하여 오차를 감소시킬 수 있음이 확인되었다.

• 한국작물학회지
• /
• 제54권2호
• /
• pp.210-217
• /
• 2009

본 연구에서 실행한 LM 벼의 화분비산 연구는 non-LM벼와 잡초성 벼의 의도치 않은 교잡은 경작지의 생태계에 문제를 야기할 기능성이 커지고 있다. 본 연구는 이를 예방하기 위한 벼의 이격거리 설정을 위하여 수행하였다. 1. 벼의 개화기간의 개화시간$(10:00{\sim}14:00)$의 주풍은 남풍이었으며, 시간대별 풍속은 $0.94{\sim}1.77$ m/s이었다. 2. 개화기는 LM벼와 Wild벼가 일치하는 기간은 8일이였으며, LM벼와 Wild벼의 최성기는 4일의 차이가 있다. 3. LM벼의 화분이 non-LM벼보다 유의하게 작게 조사되었다. 4. 화분채집량은 위가 노출된 슬라이드 글라스가 위가 덮인 슬라이드 글래스 보다 많았으며 LM벼가 Wild벼보다 비산량이 많았다. 5. 벼 화분의 비산은 오전 10시부터 오후 2시까지 대부분 이루어졌다. 6. 거리에 따른 화분비산량은 1 m까지는 급격히 감소하였으며 2 m이상에서는 서서히 감소하는 전형적인 지수함수를 나타냈으며, 3 m이상에서는 거의 발견되지 않았다.

• Ocean Systems Engineering
• /
• 제6권1호
• /
• pp.23-60
• /
• 2016

The major objective of this study was to develop further understanding of 3D nearshore hydrodynamics under a variety of wave and tidal forcing conditions. The main tool used was a comprehensive 3D numerical model - combining the flow module of Delft3D with the WAVE solver of XBeach - of nearshore hydro- and morphodynamics that can simulate flow, sediment transport, and morphological evolution. Surf-swash zone hydrodynamics were modeled using the 3D Navier-Stokes equations, combined with various turbulence models (${\kappa}-{\varepsilon}$, ${\kappa}-L$, ATM and H-LES). Sediment transport and resulting foreshore profile changes were approximated using different sediment transport relations that consider both bed- and suspended-load transport of non-cohesive sediments. The numerical set-up was tested against field data, with good agreement found. Different numerical experiments under a range of bed characteristics and incident wave and tidal conditions were run to test the model's capability to reproduce 3D flow, wave propagation, sediment transport and morphodynamics in the nearshore at the field scale. The results were interpreted according to existing understanding of surf and swash zone processes. Our numerical experiments confirm that the angle between the crest line of the approaching wave and the shoreline defines the direction and strength of the longshore current, while the longshore current velocity varies across the nearshore zone. The model simulates the undertow, hydraulic cell and rip-current patterns generated by radiation stresses and longshore variability in wave heights. Numerical results show that a non-uniform seabed is crucial for generation of rip currents in the nearshore (when bed slope is uniform, rips are not generated). Increasing the wave height increases the peaks of eddy viscosity and TKE (turbulent kinetic energy), while increasing the tidal amplitude reduces these peaks. Wave and tide interaction has most striking effects on the foreshore profile with the formation of the intertidal bar. High values of eddy viscosity, TKE and wave set-up are spread offshore for coarser grain sizes. Beach profile steepness modifies the nearshore circulation pattern, significantly enhancing the vertical component of the flow. The local recirculation within the longshore current in the inshore region causes a transient offshore shift and strengthening of the longshore current. Overall, the analysis shows that, with reasonable hypotheses, it is possible to simulate the nearshore hydrodynamics subjected to oceanic forcing, consistent with existing understanding of this area. Part II of this work presents 3D nearshore morphodynamics induced by the tides and waves.