• 한국전자통신학회논문지
• /
• 제13권5호
• /
• pp.1093-1100
• /
• 2018

웨어러블 기기에서 반도체의 소형화 및 저전력 기술이 빠르게 진행됨에 따라 다양한 초소형 형태의 응용서비스를 제공할 수 있게 되었다. 최근에는 태양열, 피에조, 마찰 등 다양한 에너지 하베스터를 이용해 저전력 반도체는 매우 낮은 전원으로도 동작할 수 있게 되었다. 웨어러블 상황에서의 대부분에 에너지 하베스팅은 비연속적(non-linear)으로 발전된다. 이에 따라 본 연구에서는, 3Hz의 낮은 주파수기반 디바이스 플랫폼을 제작하여 실험적으로 평가하였다. 본 연구는 비연속적 발전 환경을 고려해, 2단계의 저장환경과 사용된 에너지 발전소자의 맞춘 에너지 고효율 변환 플랫폼 설계하였다. 또한, 비연속적 에너지 수집 환경에서 안정적인 에너지를 저장 유지를 통해 약 4.67mW/min 발전하였다.

• 조명전기설비학회논문지
• /
• 제28권9호
• /
• pp.67-72
• /
• 2014

Inflow or outflow from the water treatment plant and the sewage water has potential energy. If this potential energy can be converted into electrical energy by water turbine generator, it can help to save energy because of the high capacity utilization. So recently, micro hydro power plant is reviewed in the water treatment facility. If generation capacity is low, induction generator is primarily used. If output capacity is low, generated power is supplied to the inside load. Induction generator can cause voltage drop by the inrush current at a start-up and requires reactive power for magnetization. In this study, we analyzed the flow of power and voltage variation against inrush current that occurs when the induction generator starts under the terms that loads of linear and non-linear of the water purification plant are used. Analysis results are that the voltage drop is within an allowable range and the power factor is slightly reduced by the need of reactive power.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1993년도 봄 학술발표회논문집
• /
• pp.165-172
• /
• 1993

A non-linear mathematical model has been developed for the dynamic analysis of the reactor internals. The model includes a lumped mass and stiffness with non-linear members such as gap-spring. As hydrodynamic couplings have also been considered in the model, the effect of fluid/structure interaction between internals components due to their immersion in a confining fluid can be studied for the dynamic response analysis. The reactor internals responses for seismic and pipe break excitations have been calculated for the case of with-and without-hydrodynamic couplings.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제16권1호
• /
• pp.319-333
• /
• 2022

In order to enhance system energy efficiency, bidirectional link resource allocation strategy in GFDM-based multiuser SWIPT systems is proposed. In the downlink channel, each SWIPT user applies power splitting (PS) receiver structure in information decoding (ID) and non-linear energy harvesting (EH). In the uplink channel, information transmission power is originated from the harvested energy. An optimization problem is constructed to maximize weighted sum ID achievable rates in the downlink and uplink channels via bidirectional link power allocation as well as subcarriers and subsymbols scheduling. To solve this non-convex optimization problem, Lagrange duality method, sub-gradient-based method and greedy algorithm are adopted respectively. Simulation results show that the proposed strategy is superior to the fixed subcarrier scheme regardless of the weighting coefficients. It is superior to the heuristic algorithm in larger weighting coefficients scenario.

• 조명전기설비학회논문지
• /
• 제25권4호
• /
• pp.57-64
• /
• 2011

Most of the user has been used linear load and non-linear load. The former is usually inductive load which is needed power factor compensation, the latter is power conversion system device. Actually two kinds of load is used together in the customer application. Generally capacitor is used for power-factor compensation of inductive load and reduction harmonics of non linear load with reactor. Non-linear load generates harmonic current for its energy conversion process. If harmonic current pass along the low impedance side of distribution system, the magnification of voltage and current is appeared by the series and parallel resonance. As a result, condenser has received a bitter electrical stress by the harmonic component. In this paper, we analyzed that how resonance is changed by the 5-th harmonic current pattern and proposed an alternative plan for non-magnification.

• 전기학회논문지
• /
• 제65권9호
• /
• pp.1626-1631
• /
• 2016

Generally, the low-voltage customer has been used with a linear load and nonlinear load in the 3-phase 4-wire distribution system. Linear load has usually configured the resistance and inductance, current phase is slower than the voltage phase, so power factor is low. It is required for the power factor correction device prior to the phase of the current than the voltage. The capacitor is connected in parallel to the load in order to ensure a low power factor. Power converter such as an inverter is a typical non-linear load. Non-linear load generates harmonic currents in the energy conversion process. Many electrical equipment may be adversely affected by the harmonic current. There, passive or active filter have been used to reduce these harmonics current. Passive filter consisting of inductor and capacitor generates a reactive power. According to the combination of filter inductor and capacitor, reactive power can be adjusted. In this paper, we analyzed how the combination of inductor and capacitor affects the overall power factor by simulation and measurement.

• 한국태양에너지학회 논문집
• /
• 제39권6호
• /
• pp.113-125
• /
• 2019

With the opening of the small power brokerage business market in December 2018, the small power trading market has started in Korea. Operators must submit the day-ahead estimates of power output and receive incentives based on its accuracy. Therefore, the accuracy of power generation forecasts is directly affects profits of the operators. The forecasting process for power generation can be divided into two procedure. The first is to forecast solar irradiation and the second is to transform forecasted solar irradiation into power generation. There are two methods for transformation. One is to simulate with physical model, and another is to use regression model. In this study, we found the best-fit regression model by analyzing hourly data of PV output and solar irradiation data during three years for 242 PV plants in Korea. The best model was not a linear model, but a sigmoidal model and specifically a Gompertz model. The combined linear regression and Gompertz curve was proposed because a the curve has non-zero y-intercept. As the result, R² and RMSE between observed data and the curve was significantly reduced.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제12권1호
• /
• pp.42-46
• /
• 2012

With the development of industry, more large-scale non-linear loads are added to existing power systems and they cause the serious power quality (PQ) problems to the nearby sensitive installations more and more. To protect the important loads and mitigate the impact of PQ disturbances on them, various compensating devices are installed. One of the most important control skills used in the compensating equipment at the load side is how fast they can recognize or detect the discontinuous abnormal PQ events from the normal voltage signal. This paper deals with two estimation methods for the fast detection and tracking of general PQ disturbances: Teager Energy Operator (TEO), which is a non-linear operator and used for a short time energy calculation, and Kalman Filter (KF), which is one of the most universally used estimation techniques. And it is also shown how to apply the TEO and the KF to detect the PQ disturbances such as voltage sag, swell, interruption, harmonics and voltage fluctuation.

• 한국추진공학회지
• /
• 제3권1호
• /
• pp.24-33
• /
• 1999

가스터빈 엔진의 성능예측과 진단을 위해 선형 및 비선형 가스경로 해석방법이 적용되었다. 염, 부식, 침식과 같은 물리적 손상을 탐지하기 위한 최적 계측변수를 구하기 위해 비선형 가스경로 해석을 이용하였다. 물리적 손상이 엔진성능에 미치는 영향을 연구하는데 전형적 산업용 가스터빈 엔진인 TB5000에 적용하였다. 선형 가스경로 해석과 비선형 가스경로 해석의 끈 오차 비교를 통해 최적의 계측변수가 정의될 수 있었다. 결과적으로, 선형 가스경로 해석방법은 선형화 모델의 가정에 의해 유도된 오차정도가 손상의 크기와 같은 정도가 되는 반면에 비선형 가스경로 해석방법은 Newton-Raphson 반복기법을 사용하여 독립변수와 종속변수의 비선형 관계를 충분한 정확성과 함께 풀 수 있다는 점을 알 수 있었다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2011년도 전력전자학술대회
• /
• pp.83-84
• /
• 2011

This paper presents an analysis and a novel strategy for a doubly fed induction generator (DFIG) based wind energy conversion system under unbalanced grid voltage and non-linear load conditions. A proportional-resonant (PR) current controller is applied in both grid side converter (GSC) and rotor side converter (RSC). The RSC is controlled to mitigate the stator active power and the rotor current oscillations at double supply frequency under unbalanced grid voltage while the GSC is controlled to mitigate ripples in the dc-link voltage and compensate harmonic components of the network current. Simulation results using Psim simulation program are presented for a 2 MW DFIG to confirm the effectiveness of the proposed control strategy.