• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 봄 학술발표회 논문집(I)
• /
• pp.385-390
• /
• 1998

Non-destructive field tests of the concrete has achieved increasing acceptance for the evaluation of existing concrete structures. As two major testing methods, this paper recommends the proper empirical relationship between the rebound number together with the ultrasonic pulse velocity and the core strength to fit the old concrete bridges in Korea.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표대회 논문집(III)
• /
• pp.737-742
• /
• 1998

Non-destructive field tests of the concrete has achieved increasing acceptance for the evaluation of existing concrete structures. But the application of this test has not still accomplished to guarantee perfectly the durability of the concrete bridges in Korea. As two major testing methods, this paper recommends the proper empirical relationship between the rebound number together with the ultrasonic pulse velocity and the core strength. Also, this paper recommend the relationships as the aging and as the element.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.65-68
• /
• 2006

This study is aimed to investigate the strength variation of fire-damaged reinforced concrete column with polypropylene by non-destructive test. It is studied to infer the recovery degree of residual strength of fire-damaged concrete. For measuring the surface hardness of RC columns, Schmidt hammer test is used. Testing is performed four-times: before fire test, directly after fire test, after 30 days and after 4 months.

• 한국농공학회지
• /
• 제34권E호
• /
• pp.60-69
• /
• 1992

The research significance of the paper is to identify the major properties of synthetic lightweight concrete that are affected by ASR expansion and to determine the extent and magnitude of the loss in these properties. Emphasis is also given to the use of non-destructive testing techniques ; Such as dynamic modulus of elasticity and ultrasonic pulse velocity, to examine whether these methods could be used to identify the initiation of expansion and the internal structural damage caused by ASR.

• 한국방재안전학회논문집
• /
• 제15권4호
• /
• pp.11-20
• /
• 2022

국내의 앵커볼트 일반 비파괴 검사법은 육안검사와 타음검사를 적용하고 있으나, 육안검사는 기초에 포함된 부분이나 너트 및 베이스 플레이트가 설치된 부분에서 앵커볼트의 부식이나 피로균열 등을 확인하는 것이 어렵다. 타음검사는 주변 환경과 개인차에 의한 영향을 받기 때문에 객관적인 조사가 어려운 것이 현실이므로 이러한 결함을 정량적으로 추정할 수 있는 비파괴 검사 기술개발이 필요하다. 국내 도로시설물 앵커볼트의 점검은 육안조사를 수행하고 있으며, 교량받침, 낙교방지시설 등의 앵커볼트 중요도가 높으므로 기존 점검방법과 함께 비파괴검사 기술을 개발하여 앵커볼트의 예방정비를 통해 교량 수명연장에 기여할 필요가 있다. 본 기술 개발을 통해 현재 수행하고 있지 않은 앵커볼트의 비파괴검사를 수행함으로 도로시설물 앵커볼트의 선제적/능동적 유지관리가 가능한 기술로 연구개발 및 실용화가 시급하다. 본 논문에서는 비파괴 검사 기법 중 초음파탐상법(Ultrasonic test)을 적용하여 부식, 균열 등 앵커볼트의 결함 검출 가능성 및 실뢰도를 실험적으로 검증하였다. 기술 개발이 완성되면 검사 신뢰성 향상 원천기술 확보로 앵커볼트에 대한 선제적/능동적 유지관리의 실현이 가능할 것으로 기대된다.

• 비파괴검사학회지
• /
• 제24권5호
• /
• pp.525-531
• /
• 2004

본 고는 적외선 열화상의 개념과 적외선열화상 측정윈리 및 카메라 셋팅을 기술하고 적외선열화강(IRT)에 의한 비파괴검사(NDT)의 활용 및 비파괴검사의 진단에 대하여 살펴보았다. 적외선 열화상은 주어진 표면을 따라 온도에 관련된 열패턴의 평가를 통한 정기적인 비접촉, 비파괴 시험의 수행으로 초기에 장비 고장의 예방이 가능하다. 진단 활용으로서, 열적으로 가열된 내부결함이 있는 블록에 대하여 적외선열화상을 이용한 열화상 패턴을 비파괴 기법으로 평가하고, 결함과 열화상패턴간의 특성을 분석하여 열화상 평가 기법에 대하여 논하였다.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제18권3호
• /
• pp.240-249
• /
• 2018

Purpose: The purpose of this research is to find which technique, between the PAUT (Phased array ultrasonic test) that has been used widely in practice and RT (Radiographic test) that was used widely in the past, has the higher reliability as a non-destructive testing of welding points in water wall tubes. Methods: To evaluated the reliability of non-destructive testing, eleven test pieces that were fabricated intentionally, which have the most frequently occurred defect types in water wall tubes and then both the PAUT and RT were performed on those eleven test pieces to compare their reliability. Results: The differences of type of defect, length are occurred due to the characteristics of nondestructive testing. The RT could not detect the lack of fusion defect type in specimen #4 and #8 while PAUT could not detect the lateral crack and 1 mm size small porosity in specimen #11. Conclusion: It is concluded that applying both the RT and PAUT result the best reliability rather than applying only one test method, if it is possible, in nondestructive testing of weld water wall tube in thermal power plant boiler case.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.392-395
• /
• 2004

When a concrete member is damaged by fire accident, it can lose its strength. And the degradation rate of losing its strength affected by many environmental conditions. But there is few research for equation for strength evaluation of fire-damaged concrete. Besides, it is impossible to destruct structural member from the building for the evaluation. So, I will suggest a new equation for strength evaluation of fire-damaged RC beam using non-destructive test. For this purpose, the researchers are exploring the performance of non-destructive testing methods using Ultrasonic test, Schmidt Hammer test and Coring test against fire damaged concrete specimen.

• Journal of Welding and Joining
• /
• 제17권6호
• /
• pp.100-107
• /
• 1999

In this paper, we deal with the speckle noise reduction and parameter estimation of ultrasonic NDT(non-destructive test) signals obtained during weld inspection of piping. The overall approach consists of three major steps, namely, speckle noise analysis, proposition of wavelet domain AR(autoregressive) model and flaw detection by proposed model parameter. The data are first processed whereby signals obtained using vertical and angle beam transducer. Correlation properties of speckle noise are then analyzed using multiresolution analysis in wavelet domain. The parameter estimation curve obtained using the proposed model is classified a flaw in weld region where is contaminated by severe speckle noise and also clear flaw signal is obtained through CA-CFAR threshold estimator that is a nonlinear post-processing method for removing the noise from reconstructed ultrasonic signal.

• Smart Structures and Systems
• /
• 제10권1호
• /
• pp.47-65
• /
• 2012

The presence of crack-like defects in mechanical and structural elements produces failures during their service life that in some cases can be catastrophic. So, the early detection of the fatigue cracks is particularly important because they grow rapidly, with a propagation velocity that increases exponentially, and may lead to long out-of-service periods, heavy damages of machines and severe economic consequences. In this work, a non-destructive method for the detection and identification of elliptical cracks in shafts based on stress wave propagation is proposed. The propagation of a stress wave in a cracked shaft has been numerically analyzed and numerical results have been used to detect and identify the crack through the genetic algorithm optimization method. The results obtained in this work allow the development of an on-line method for damage detection and identification for cracked shaft-like components using an easy and portable dynamic testing device.