• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.397-401
• /
• 1995

ESPI(Electronic Speckle Pattern Interfermetry) is an optical technique to measure surface deforamtion of engineering components and materials in industrial ares. This optical method is capable of providing full-field results with high spatial resolution, high speed and is the non-contact technique. One of important application aspects using electronic speckle pattern interferometry is to generate contours of a diffuse object in order to provide data for 3-D shape analysis and topography measurement. The contouring method by modified dual-beam speckle pattern interferometry is proposed. We introduce a shift of the illumination beams through optical fiber in order to obtain the contour fringe patterns. The speckle pattern correlation technique is suitable for providing measurement range from millimeters to several centimeters. The complete geometric analysis of the contoretical and experimental results are obtained.

• Structural Engineering and Mechanics
• /
• 제34권3호
• /
• pp.319-334
• /
• 2010

The dynamic response of a finite Bernoulli-Euler beam resting on a tensionless Pasternak foundation and subjected to a concentrated harmonic load is investigated in this study. This load may be applied at the center of the beam, or it may be offset from the center. Since the elastic foundation is assumed to be tensionless, the beam may lift off the foundation, resulting in contact and non-contact regions in the system. An analytical/numerical solution is obtained from the governing equations of the contact and non-contact regions to determine the coordinates of the lift-off points. Although there is no nonlinear term in the equations, the problem appears to be nonlinear since the contact regions are not known in advance. Due to that nonlinearity, the essentials of the problem (the coordinates of the lift-off points) are calculated numerically using the Newton-Raphson technique. The results, which represent the symmetric and asymmetric responses of the beam, are presented graphically in this work. They illustrate the effects of the forcing frequency and the beam length on the extent of the contact regions and displacements.

• 비파괴검사학회지
• /
• 제24권5호
• /
• pp.532-537
• /
• 2004

전자기장을 유도하는 원리를 기초로 한 새로운 비파괴탐상법인 FEF법을 개발하였다. 이 탐상법은 전자기장을 유도하는 유도선과 이를 감지하는 감지부로 구성되어 있고, 비접촉 방식으로 탐상을 실시한다. 본 연구는 알루미늄합금, 스테인레스강과 인코넬 합금강의 재료에 방전 가공한 결함에 대하여 결함 검출 및 결함 깊이에 대한 평가를 실시하였다. 결함이 없는 영역에서의 측정전압은 lift-off에 의존한다. 결함영역에서 탐촉자가 결함에 가까이 접근할수록 전압은 증가하고, 결함위치에서 최고전압으로 측정되며, 이 최고치는 결함의 깊이에 따라 변화한다. 각 재료에 대한 전압분포 같은 경향으로 측정된다.

• 비파괴검사학회지
• /
• 제36권6호
• /
• pp.510-516
• /
• 2016

• Tribology and Lubricants
• /
• 제14권4호
• /
• pp.121-127
• /
• 1998

In this study, a numerical procedure to solve a contact problem has been developed. The procedure takes advantage of signal processing technique in frequency domain to achieve shorter computing time. Boussinesq's equation was adopted as the response function. This procedure is applicable to a non-periodic surface profile as well as a periodic one. The validity of this procedure has been established by comparing the numerical results with the exact solutions. The fastness of this procedure was shown in comparison with other algorithm.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.529-533
• /
• 2001

NDI technique system using AC current is newly developed for inspection of defects. This technique is non-contact measurement system and can be applied for locating and sizing of surface defects in components. In this paper, the technique was applied for evaluating the location and size for 2-dimensional surface cracks and we had investigated the influence of frequency and lift-off. The results show that defects are able to detect with the variety of voltage, and the measuring voltage for the depth of defects are under the influence of the measuring frequency and the lift-off.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2006년 창립20주년기념 정기학술대회 및 국제워크샵
• /
• pp.41-45
• /
• 2006

The fabrication process of fiber placement system of carbon fiber reinforced plastic (CFRP) requires real time process control and reliable inspection to ensure quality by preventing defects such as delamination and void. Therefore, novel non-contact inspection technique is required during the non-destructive evaluation in a fiber placement system. For the inspection of delamination in CFRP, various methods to receive laser-generated ultrasound were applied by using piezoelectric transducer, air-coupled transducer, wavelet transform and scanning laser ultrasonic technique. Laser-generated ultrasound was received with a conventional piezoelectric sensor in contacting manner. Then signal characteristics due to defects were analyzed to find a factor for detecting defects. Air-coupled transducer was used for reception of laser-generated guided wave using linear slit array in order to generate high frequency guided wave. And line scan technique was used to confirm the capability of on-line application. The high frequency component of laser-generated guided wave received with piezoelectric sensor disappeared after propagating through delamination region. Nevertheless, it was failed to receive high frequency guided wave in using air-coupled transducer. The first peak of the frequency spectrum under 100kHz in the delamination region is higher than in the sound region. By using this feature, the line scanned frequency data were acquired in fully non-contact generation and reception of ultrasound. This method was proved as useful technique for detecting delamination in CFRP.

• 비파괴검사학회지
• /
• 제28권3호
• /
• pp.292-301
• /
• 2008

A linearized model for hysteretic acoustic nonlinearity of imperfectly joined interface is proposed and analyzed by using Coulomb damping to investigate the characteristics of the reflection and transmission coefficients for harmonic waves at the contact interface. Closed crack is modeled as non welded interface that has nonlinear discontinuity condition in displacement across its boundary. Based on the hysteretic contact stiffness of the contact interface, the reflected and transmitted waves are determined by deriving the tractions on both sides of the interface in terms of the discontinuous displacements across the interface. It is found that the amplitudes of the reflected and transmitted waves are dependent on the frequency and the hysteretic stiffness. As the frequency of the incident wave increases, the higher reflection and lower transmission are obtained. It also shows that the hysteresis of the interface increases the reflection coefficient, but reduces the transmission coefficient. A fatigue crack is also made in aluminum specimen to demonstrate these characteristics of the reflection and transmission of contact interfaces.

• 한국구조물진단유지관리공학회 논문집
• /
• 제23권3호
• /
• pp.92-95
• /
• 2019

본 논문에서는 압분광법을 기반으로 강재에 작용하는 응력을 비파괴/비접촉식으로 측정할 수 있는 새로운 방법은 제안하고, 이에 대한 가능성을 실험적으로 검증하였다. 분광법은 일반적으로 대상물의 화학적 성분을 분석하는데 주로 사용되며, 토목분야에서는 강재의 부식을 판단하는데 일부 사용되고 있다. 압분광법은 대상물이 하중을 받을 때 측정된 스펙트럼이 하중이 없는 상태에서 측정된 스펙트럼으로부터 이동(Shift)되는 현상인, 압분광현상을 기반으로 응력을 측정하는 방법이다. 여기서, 응력-스펙트럼 이동 관계를 선형으로 가정하였을 때, 압분광 계수를 도출할 수 있으며, 이를 통하여 현재상태의 응력을 측정할 수 있다. 해당 기술은 레이저를 기반으로한 비접촉식 응력측정 기술로써, 최근에 철도 구조물에 대한 응력 측정을 시작으로 다양한 토목구조물의 응력측정에 대한 적용이 시도되고 있다. 본 연구에서는 이와 같은 압분광법 기술을 이용하여 강구조물의 응력을 측정할 수 있도록, 용사코팅을 이용하여 알루미나를 구조용 강재표면에 도포하고, 일축압축 하중시험을 수행하여 각 하중단계에서의 스펙트럼 이동(Shift)값을 확인하였다. 이를 통하여, 각 하중값과 스펙트럼 이동값이 선형관계임을 확인하였다. 따라서, 이와 같은 선형적인 관계로 부터, 1차 선형식의 상수값인 압분광 계수를 도출하고, 이를 통하여 강재에 작용하는 응력을 측정할 수 있을 것으로 기대된다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2005년도 춘계학술대회 논문집
• /
• pp.71-76
• /
• 2005

The defects evaluation of the interior and the surface would be considered as vital characteristics in predicting the total life span of the steel structure. More importantly, the understandings in the interior composite of welding zone and the notifications in the presence, the formation, and the positioning of the non-metallic inclusion are necessary as well, since there were signs of relatively high defect frequency presented in the welding zone. The ultrasonic testing is a highly recommended technique chosen from among other techniques because of variety of advantages in conducting the non-destructive testing for the welding zone. However, the ultrasonic testing had technical disadvantages referred as followings; the problems due to the couplant between the PZT and the specimen, the formations that were miniature and complex, the moving subject, and the high temperature surrounding the specimen. This research was conducted to resolve the technical disadvantages of the contact ultrasonic testing by studying the non-contact ultrasonic testing where the ultrasonic waves were transferred by the laser, and revealing the specimen defects at its interior part and its surface part. The ultimate goal of this research was to develop a non-destructive evaluation applying the laser manipulated ultrasonic method for the steel structure.