• Journal of Environmental Science International
• /
• v.24 no.8
• /
• pp.1045-1053
• /
• 2015

This study evaluated the effect of water level of water resources on water quality in Ulsan. Two reservoirs, Sayeon Dam and Hoeya Dam, were selected and water quality of chemical oxygen demand (COD), total nitrogen (TN) and total phosphorus (TP) were analyzed from 2012 to 2014. And the characteristics of precipitation were also analyzed for 70 years (1945~2014) because runoff of non-point pollutant was strongly affected by precipitation. As a result, water deterioration of Sayeon Dam and Hoeya Dam were affected in accordance with lowering water level. For example, the concentrations of COD and TN was negatively correlated with the water level when the water level of Sayeon Dam was gradually decreased in 2013. The TN concentration was increased to 1.432 mg/L from 0.875 mg/L while the lowest water level of Sayeon Dam was recorded 45 m in 2014. Additionally the concentration of COD and TN was sensitively increased with 0.213 mg/L/m and 0.058 mg/L/m on account of non-point pollutant runoff. It is indicated that hereafter a control of non-point pollutant runoff is the critical factors to maintain water resources because the contribution of non-point pollutant is expected to increase due to the frequent heavy rain events. Therefore, it is necessary to map out a specific plan for non-point pollutant control based on analyses of runoff characteristics, water pollution sources and reduction plans in water pollutants and to establish a water modelling and database system as a preventive action plan.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10b
• /
• pp.1607-1610
• /
• 1991

It is difficult to design the controller of an induction motor because of its non-linearity and high order dynamics. But it is possible to get reduced order system using the theory of singular pertubation because the dynamics of induction motor consists of fast stable mode and slow one. On the other hand, the sliding mode control is well-known for its performance of robustness. This paper deals with the sliding mode controller of induction motors based on the reduced order system.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1996.10a
• /
• pp.111-114
• /
• 1996

Hydroponics is to grow plants, not in soil but in water which the quantity of necessary chemical food can be controlled. In this paper, this is designed in the automatic system. The closed culture reduces cost of production and produces a many kinds of agricultural products in a confined place. An adaptive fuzzy control in the best method to solve and to overcome parametric uncertainties and non-linearity of the controlled system. A hydroponics automation system which is able to overcome these control problems. It is used in implementation of the hydroponics automation system. The performance is analyzed through an experiment in which the new adaptive fuzzy control method is applied to the automatic control of tomato hydroponics.

• Advances in Traditional Medicine
• /
• v.9 no.2
• /
• pp.164-173
• /
• 2009

The anti-inflammatory effect of Spirulina fusiformis on monosodium urate crystal-induced inflammation in mice has been investigated and compared with the non-steroidal anti-inflammatory drug Indomethacin. The paw volume, lysosomal enzyme activities, lipid peroxidation, anti-oxidant status and inflammatory mediator tumour necrosis factor-$\alpha$ were studied in control and monosodium urate crystal-induced mice after oral administration of Spirulina platensis in an experimental model for gouty arthritis. In the induced mice, the levels of lysosomal enzymes, inflammatory mediator tumour necrosis factor-$\alpha$, lipid peroxidation and the paw volume increased significantly, whereas the antioxidant status decreased when compared to control mice. $\beta$-glucuronidase and lactate dehydrogenase level were also found to be increased in untreated monosodium urate crystal-incubated polymorphonuclear leucocytes. After the oral administration of Spirulina fusiformis, the physical and biochemical changes observed in monosodium urate crystal-induced animals were significantly restored to near normal levels. The results clearly indicated the anti-inflammatory role of Spirulina fusiformis, a promising drug for gouty arthritis.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1384-1385
• /
• 2006

Platinum is a candidate of top and bottom electrode in ferroelectric random access memory and dynamic random access memory. High dielectric materials and ferroelectric materials were generally patterned by plasma etching, however, the low etch rate and low etching profile were repoted. We proposed the damascene process of high dielectric materials and ferroelectric materials for patterning process through the chemical mechanical polishing process. At this time, platinum as a top electrode was used for the stopper for the end-point detection as Igarashi model. Therefore, the control of removal rate in platinum chemical mechanical polishing process was required. In this study, an addition of $H_{2}O_{2}$ oxidizer to alumina slurry could control the removal rate of platinum. The removal rate of platinum rapidly increased with an addition of 10wt% $H_{2}O_{2}$ oxidizer from 24.81nm/min to 113.59nm/min. Within-wafer non-uniformity of platinum after chemical mechanical polishing process was 9.93% with an addition of 5wt% $H_{2}O_{2}$ oxidizer.

• Membrane Journal
• /
• v.22 no.2
• /
• pp.104-112
• /
• 2012

Chemically stable Polyvinylidene fluoride-hexa-fluoropropane (PVDF-HFP) copolymer asymmetric membranes were prepared by the conventional phase inversion process, using Dimethyacetamide (DMAc) as a solvent and water as a non-solvent. To control the pore size and porosity of the PVDF-HFP membranes, tetra-ethoxysilane (TEOS) was used as a pore-forming agent. The prepared membranes were characterized, using several analytical methods such as Fourier Transform Infrared spectroscopy (FTIR), Thermo-gravimetric analyzer (TGA), Field Emission Scanning Electronic Microscopy (FESEM). TEOS turned out to increase porosity and make homogeneous pores on the membranes. Depending on the composition of the dope solutions, the pore size was ranged from 0.1 to 1.0 ${\mu}m$. The flux of the PVDF-HFP membranes prepared by using TEOS as a pore forming agent was increased substantially without much decrease in the rejection. When 15 wt% PVDF-HFP solution was blended with 13 wt% TEOS solution at composition ratio of 70/30 in wt%, the water flux at 2 bars was about 2 $m^3/m^2day$.

• Korean Journal of Veterinary Research
• /
• v.38 no.2
• /
• pp.413-418
• /
• 1998

Intracardiac velocities were determined and the wave-forms described for 4 flow areas of the normal canine heart following administration of chemical restraint drugs including xylazine HCl, ketamine HCl, and thiopental sodium using pulsed wave Doppler echocardiography. The result was that xylazine HCl and thiopental sodium reduced intracardiac flow velocities through mitral, tricuspid, aortic and pulmonary valves. It is also thought that precautions are required before using these drugs. Patterns of wave-forms had no changes between control and treatment groups. Doppler echocardiography allows the clinician to determine flow velocities across the different valves and within the various chambers of the heart. It is shown that establishing normal values and those related to chemical restraint administrations and knowing what influences them should allow the clinician to non-invasively diagnose a variety of pathological cardiac conditions.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.501-504
• /
• 1999

In the shallow trench isolation(STI) chemical mechanical polishing(CMP) process, the key issues are the optimized thickness control within- wafer-non-uniformity, and the possible defects such as nitride residue and pad oxide damage. These defects after STI CMP process were discussed to accomplish its optimum process condition. To understand its optimum process condition, overall STI related processes including reverse moat etch, trench etch, STI filling and STI CMP were discussed. It is represented that the nitride residue can be occurred in the condition of high post CMP thickness and low trench depth. In addition there are remaining oxide on the moat surface after reverse moat etch. It means that reverse moat etching process can be the main source of nitride residue. Pad oxide damage can be caused by over-polishing and high trench depth.

• Toxicological Research
• /
• v.9 no.1
• /
• pp.69-72
• /
• 1993

LBD-005, a newly developed recombinant granulocyte-macrophage colony stimulating factor, was tested for primary skin irritation in male New Zealand White rabbits. In the primary skin irritation test, LBD-005 was applied to intact and abraded skins for 24 hours. Primary irritation index was "0" in test and control sites of all animals' thus LBD-005 was evaluated as a non-irritatant on the basis of the criteria of Draize et al. (1994).l. (1994).

• Biomaterials and Biomechanics in Bioengineering
• /
• v.2 no.1
• /
• pp.33-45
• /
• 2015

To engineer tissue-like structures, cells are required to organize themselves into three-dimensional networks that mimic the native tissue micro-architecture. Here, we present agarose-based multi-well platform incorporated with electrical stimulation to build skeletal muscle-like tissues in a facile and highly reproducible fashion. Electrical stimulation of C2C12 cells encapsulated in collagen/matrigel hydrogels facilitated the formation 3D muscle tissues. Consequently, we confirmed the transcriptional upregulations of myogenic related genes in the electrical stimulation group compared to non-stimulated control group in our multi-well 3D culture platform. Given the robust fabrication, engineered muscle tissues in multi-well platform may find their use in high-throughput biological studies drug screenings.