• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.97-98
• /
• 2006

Fusion of decisions from multiple distributed sensor nodes is studied in this work. Based on the canonical parallel fusion model, we derive the optimal likelihood ratio based fusion rule with the assumptions of the generalized Gaussian noise model and the arbitrary fading channel. This optimal fusion rule, however, requires the complete knowledge of the channels and the detection performance of local sensor nodes. To mitigate these requirements and to provide near optimum performance, we derive suboptimum fusion rules by using high and low signal-to-noise ratio (SNR) approximations to the optimal fusion rule. Performance evaluation is conducted through simulations.

• Journal of electromagnetic engineering and science
• /
• 제12권3호
• /
• pp.203-209
• /
• 2012

In order to improve sensing performance when the noise variance is not known, this paper considers a so-called blind spectrum sensing technique that is based on eigenvalue models. In this paper, we employed the spiked population models in order to identify the miss detection probability. At first, we try to estimate the unknown noise variance based on the blind measurements at a secondary location. We then investigate the performance of detection, in terms of both theoretical and empirical aspects, after applying this estimated noise variance result. In addition, we study the effects of the number of SUs and the number of samples on the spectrum sensing performance.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.687-691
• /
• 2007

It is important to increase the sound proof performance of building for reducing the influence of aircraft noise on the bais of actual survey of existed buildings. The purpose of this study is to propose the basic data for designing sound insulation of residential house. In this study, field measurement of aircraft noise Interior and outside noise level difference were carried out for 7 days in 2 residential houses. As the result, aircraft noise levels showed to be Leq $71.8{\sim}74.5$dB(A), WECPNL $82.2{\sim}83.4$ and indoor noise level were NC-55 ${\sim}63$ over acceptable NC-30 in 2 measured houses. Noise reduction effect showed to be $15.8{\sim}23.1$dB(A) in measured houses, and houses with double window were preferable to those with single window in sound proof performance. The outside sound pressure level for residential house was a little different according to the type of source. In measuring by using aircraft noise it was effected by angle and distance from measuring point, to aircraft, window area, and sound absorption of room, and so on.

• 대한음성학회:학술대회논문집
• /
• 대한음성학회 2004년도 춘계 학술대회 발표논문집
• /
• pp.231-234
• /
• 2004

This paper describes an efficient method for improving the noise-robustness in speech recognition in a running car by considering wind noise. In driving car, mainly three kind of noises engine noise, tire noise and wind noise, are severely affect recognition performance. Especially wind noise is an important factor in driving car with window opened. We analyzed wind noise in various driving conditions that are 60, 80, 100 km/h with window fully opened, window half opened. We clarified that the recognition rate is significantly degenerated when the wind noise components in the frequency range above 200 Hz are large. We developed a preprocessing method to improve the noise robustness despite of wind noise. We adaptively changed the cutoff frequency of the front-end high-pass filter from 100 through 200 Hz according to the level of the wind noise components. By this method, the recognition rate is considerably improved for all kind of driving conditions

• International Journal of Automotive Technology
• /
• 제7권1호
• /
• pp.43-49
• /
• 2006

In this paper, an index for the evaluation of a vehicle intake booming noise and intake sound quality were developed through a correlation analysis and a multiple factor regression analysis of objective measurement and subjective evaluation data. At first, an intake orifice noise was measured at the wide-open throttle test condition. And then, an acoustic transfer function between intake orifice noise and interior noise at the steady state condition was estimated. Simultaneously, subjective evaluation was carried out with a 10-scale score by 8 intake noise and vibration expert evaluators. Next, the correlation analysis between the psychoacoustic parameters derived from the measured data and the subjective evaluation was performed. The most critical factor was determined and the corresponding index for intake booming noise and sound quality are obtained from the multiple factor regression method. And, the optimal design of intake system was studied using the booming noise and the sound quality evaluation index for expectation performance of intake system. Conclusively, the optimal designing parameters of intake system from noise level and sound quality whose point of view were extracted by adapting comparative weighting between the booming noise and sound quality evaluation index, which optimized the process. These work could be represented guideline to system engineers, designers and test engineers about optimization procedure of system performance by considering both of noise level and sound quality.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.193-198
• /
• 2004

In order to keep the market competitiveness, it is desirable for automotive manufacturer to meet the customer's various aspects of requirements. The overall NVH (Noise, Vibration, and Harshness) performance has been an important measure when evaluating overall vehicle performance, product quality, and enhancing customers' loyalty to the product. The noise and vibration, while the engine is idling, has been brought particular attention to the drivers and passengers, because they encounter the operation conditions quite frequently without other masking noise sources: wind noise, road noise, and even powertrain radiated noise at higher speed driving. The specific noise, defined as 'CHIT' noise, has been identified as a potential customer issue, from the Pickup Truck with newly developed V8 powertrain. This paper describes the definition of the noise, identifying the potential sources, and noise radiation mechanisms, based on series of powertrain and vehicle test and verification processes. Then, based on the root-cause identified, the design change has been proposed and validated with several vehicles in order to have a complete satisfaction of the customer.

• 한국위성정보통신학회논문지
• /
• 제12권2호
• /
• pp.42-45
• /
• 2017

전력선통신 시스템에서는 전력망을 활용한 통신 방식을 사용하기 때문에 일반적 통신선로를 활용한 통신 방식에 비해 잡음이 많고, 이것으로 인한 성능 저하가 문제가 되고 있다. 이러한 잡음으로 인한 성능 저하를 완화시키기 위해, 본 논문에서는 전력선통신 시스템에서의 임펄스 잡음 환경에서 신호를 검출하는 인공지능 알고리즘을 제안한다. 다항식 회귀법을 이용하여 임펄스 잡음 신호의 원신호를 예측하고, 시뮬레이션 결과를 통해 본 논문에서 제안한 인공지능 알고리즘을 적용한 전력선통신 시스템에서 임펄스 잡음 환경내 신호 검출 성능 향상을 입증한다.

• 한국항공운항학회지
• /
• 제31권1호
• /
• pp.26-36
• /
• 2023

공군 조종사들이 비행 중에 겪는 지속적이고 강도 높은 소음은 조종사의 생리적(physiological) 및 심리적(psychological) 상태에 부정적인 영향을 미칠 수 있다. 이는 조종사의 비행 능력(performance)에 부정적인 영향을 주게 되며 임무 완수 및 비행 안전을 저해시키는 치명적인 결과로 이어질 수 있다. 대한민국 공군은 조종사들의 청력 보호를 위해 수동 소음 감쇠(Passive Noise Cancellation, PNC) 및 능동 소음 감쇠(Active Noise Cancellation, ANC) 기술이 적용된 헤드셋 및 헬멧을 사용 중이다. 그러나, 소음 저감 기술이 조종사의 청력 보호, 비행 능력, 및 비행 안전에 미치는 효용성에 대한 공군 조종사의 인식은 아직 연구된 바가 없다. 따라서 본 연구는 소음과 관련된 이론적 배경을 고찰하였고, 이후 설문조사를 통해 공군 조종사들(n=154)의 조종석 내 소음 및 소음 감쇠 기술에 대한 인식을 분석하였다. 분석 결과, 능동 소음 감쇠(ANC) 기술이 적용된 헤드셋 및 헬멧의 사용은 소음이 조종사의 생리적 상태에 미치는 영향에는 유의미한 효과가 없지만(p=0.402), 심리적 상태에 미치는 영향은 유의미하게 감소시키는 것으로 나타났다(p<0.001). 따라서, 능동 소음 감쇠(ANC) 기술이 적용된 비행 헤드셋 및 헬멧 사용의 필요성을 강조하였고, 이를 통해 조종사의 비행 능력(performance) 저하 방지 및 비행 안전 증진에 기여하고자 한다.

• 한국음향학회지
• /
• 제29권1호
• /
• pp.10-17
• /
• 2010

수중에서 소나를 이용하여 표적을 탐지하고자 할 때 자함에서 발생되는 소음을 감소시켜 표적의 탐지성능을 향상시키는 것은 매우 중요한 일이다. 본 논문에서는 수상함에서 선체고정형소나(HMS)를 사용하는 경우 두 가지 운영모드에 대하여 자함의 소음감소 성능을 분석하였다. 운영자모드에서는 ALE(Adaptive Line Enhancer)기법을 적용하여 자함신호의 광대역 성분을 감소하므로 토널 성분의 탐지성능을 향상하였으며, 자동모드에서는 주 입력신호와 상관관계를 가진 기준 입력신호를 선정하여 조향 방위로 유입되는 잡음신호를 제거하였다. 적응필터를 설계하기 위하여 NLMS(Normalized LMS)알고리즘을 이용하였으며 실제 해상실험 데이터를 이용하여 시뮬레이션을 수행하므로 제안한 기법의 성능을 확인하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 춘계학술대회 논문집
• /
• pp.135-136
• /
• 2014