• 한국소음진동공학회논문집
• /
• 제21권7호
• /
• pp.609-614
• /
• 2011

The ship working environment of combat service support boat is much inferior to the ground working environment. For this reason, the crew of a combat service support boat suffer from an occupational disease such as hardness of hearing. Owing to its small size and low status, the improvement of its working and residential environment was occasionally ignored and its indoor noise was not fully investigated. In this study, for improving its residential environment indoor, the indoor noise of its shipboard compartments was analysed. These studies define the indoor noise level of combat service support boat is very high and some of indoor noise is exceeded the criteria for ship noise. Compared with marine police vessels, the indoor noise levels of marine police vessels are higher than the level of combat service support boat.

• 대한조선학회논문집
• /
• 제45권6호
• /
• pp.719-725
• /
• 2008

In this paper, noise and vibration reduction for floating-floored ship cabin is studied. A mock-up is built by using 6 mm steel plate, and two identical cabins are made for simulation of ship cabins. When a speaker is used as a sound and vibration sources, it is shown that floating floor is more effective in isolating sound than bare deck by 2-5 dB. It is also shown that structure-borne noise of the bare deck is greater than that of floating-floored deck by 3-10 dB. For tapping machine excitation, it is found that the effect of floating floor in airborne noise and structure-borne noise reduction reaches up to 40-50 dB for high frequency ranges.

• 한국통신학회논문지
• /
• 제38C권2호
• /
• pp.189-195
• /
• 2013

본 논문에서는 선박에서의 잡음 환경에 강건한 음성인식 기술을 포함하는 육해상 통합관광정보 안내 시스템을 제안한다. 대부분의 음성인식 전처리부는 차량, 배블(babble) 잡음 등의 정상특성 잡음 제거하기 위해 위너(Wiener) 필터를 이용해 왔다. 하지만 이러한 기존의 전처리부는 항해중인 선박 내에서 발생하는 비정상 잡음을 제거하는데 한계가 있다. 이러한 한계를 극복하기 위해 제안하는 시스템은 높은 관광 경로 인식 정확성을 얻기 위해 비선형 다중밴드 스펙트럴 차감법(multi-band spectral subtraction)을 적용한다. 실험 결과 제안된 시스템은 기존 대비 10 dB 신호대잡음비의 잡음 환경에서 평균 5.54%의 경로명 인식률 개선을 보였다.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제3권4호
• /
• pp.389-393
• /
• 2014

This paper presents one of the methods for design to reduce the noise and vibration of 200kW motor for electric propulsion ship. One of the important factors affecting vibration of the motor is the resonance. The natural frequency and natural mode of the 200kW motor is analyzed by using FEM tool and impact test equipment to avoid the resonance. Also, compare FEM result with impact test result to make a reliable FE model of 200kW motor. In order to find out the effect of the noise and vibration of the motor by electromagnetic excitation force, conduct electromagnetic-structure coupled analysis. These characteristics are much useful to design 200kW motor for electric propulsion ship.

• 한국소음진동공학회논문집
• /
• 제23권12호
• /
• pp.1073-1081
• /
• 2013

The definition of the radiation efficiency is very important to estimated underwater radiated noise of a ship. Considering the structure of the ship, it can be found that the hull of a ship consists of a lot of plates supporting by longitudinal and transverse stiffener. Therefore, various modes of the hull vibration occur related to the combination of these plates including stiffeners. In this paper, the method to define the radiation efficiency is suggested considering the vibration mode of the hull based on Uchida's experimental equation of the radiation efficiency. The suggested method is verified by the experiments with various kinds of naval vessels.

• 한국소음진동공학회논문집
• /
• 제16권9호
• /
• pp.949-957
• /
• 2006

In this Paper, reduction of noise and vibration in ship cabins by using floating floor is studied. Two theoretical models are presented and predicted insertion losses of floating floor are compared to experimental results, where measurements have been done in mock-up built for simulating typical ship cabin structures. In ships, mineral wool is usually used as the impact absorbing materials. The first model (M-S-Plate Model) is that upper plate and mineral wool are assumed as a one-dimensional mass-spring system, which is in turn attached to the simply supported elastic floor. The second model (Wave-Plate Model) is that mineral wool is assumed as an elastic medium for wave propagation. The comparisons show that M-S-Plate model is in good agreement with experimental results when density of mineral wool is 140K, and fiber direction is horizontal. For higher density and vertical fiber direction, Wave-Plate model shows good agreements with measurements. It is found that including the elastic behavior of the floor is essential in improving accuracy of the prediction for low frequency ranges below $100{sim}200Hz$.

• 대한조선학회논문집
• /
• 제42권3호
• /
• pp.249-258
• /
• 2005

Recently, the vibration reduction at a local structure such as compass deck has been continuously requested by ship owner and shipbuilder. Because crews are afflicted with vibration, severe vibration problems even bring about a damage of structure. This study conducted to get an optimized stiffener size of compass deck to reduce the vibration level and decrease the weight of structure in ship. NASTRAN external call type optimization software (OptShip) which makes use of NASTRAN as a solver is used as an optimization tool. The results indicate that the optimum design is promising for real applications.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.54-60
• /
• 2006

This study looks over the relation between propeller and noise in ship stern structure. Near field noise and vibration measurements are compared with the analytical results using wave number method. To avoid singularity in wave number integration method, fast field method is introduced. Analytical results show that main transmission mechanism of high frequency noise is structure-borne type and that of low frequency noise is a air-borne type.

• Journal of Hydrospace Technology
• /
• 제2권1호
• /
• pp.18-26
• /
• 1996

It is normal practice to consider bending wave modes only, when one applies SEA (Statistical Energy Analysis) to ship structures because of complexities in SEA modeling and evaluation of coupling loss factors for inplane modes. According to the result of Tratch[1], the inplane wave modes becomes important for the analysis of a foundation structure as the distance from the source and receiver increases. In this paper, the effect of inplane wave modes on structure-borne noise propagation in ship structures is presented. It is shown that the inplane wave could increase the noise level more than 10 dB compared with the results without inplane wave modes at high frequency bands for compartments far from the source location.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1997년도 영남지회 학술발표회 논문집 Acoustic Society of Korean Youngnam Chapter Symposium Proceedings
• /
• pp.68-74
• /
• 1997

Ship radiated noise is an infortant parameter which dtermines Anti Submarine Warfare(ASW) countermeansure or passive Sonar detection and classification performance. Its measurement should be performed under controlled ocean acoustic environment. In data reduction of the measured data from hydrophone array, theeffect fo ambient noise, surface reflection and bottom reflection etc. should be compensated to obtain the source level of the ship radiated noise. This study describes the measurement hydrophone array design criteria based on the analysis of transimission anomaly due to the surface reflection.