• 제목/요약/키워드: noise exposure

검색결과 517건 처리시간 0.026초

이동형 전산화단층촬영장치의 기본 안전 및 필수 성능 기준을 마련하기 위한 연구 (A Study on Establishment of Basic Safety and Essential Performance Criteria of Mobile Computed Tomography)

  • 김은혜;박혜민;김정민
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제44권3호
    • /
    • pp.261-267
    • /
    • 2021
  • As the number of Coronavirus Disease-19 (COVID-19) patients increases in a global pandemic situation, the usefulness of mobile computed tomography (CT) is gaining attention. Currently, mobile CT follows the basic safety and essential performance evaluation criteria of whole-body or limited-view X-ray CT in order to obtain device approval and evaluation in the Republic of Korea. Unlike stationary CT, mobile CT is not operated in shielded areas but rather areas such as intensive care units, operating rooms, or isolation rooms. Therefore, it requires a different basic safety and essential performance evaluation standard than stationary CT. In this study, four derived basic safety evaluation criteria related to electrical, mechanical, and radiation safety were included (dose indication test, protection against stray radiation, safety measures against excessive X-rays, half-value layer measurement); and seven essential performance evaluation criteria were included (tube voltage accuracy, mAs accuracy, radiation dose reproducibility, CT number of water, noise, uniformity, and spatial resolution); total eleven basic safety and essential performance evaluation criteria were selected. This study aims to establish appropriate basic safety and essential performance evaluation criteria for simultaneously obtaining images with diagnostic value and reducing the exposure of nearby patients, medical staff, and radiologic technologists during the use of mobile CT.

주광이 무선 광통신 시스템의 수신 감도에 미치는 영향 (Impact of Solar Irradiance on the Receiver Sensitivity of Free-Space Optical Communication Systems)

  • 박기홍;김훈
    • 한국광학회지
    • /
    • 제31권6호
    • /
    • pp.259-267
    • /
    • 2020
  • 실외에서 운용되는 무선 광통신 시스템의 수신기는 태양광에 직·간접적으로 노출되기 마련이다. 본 논문에서는 주광이 무선 광통신 시스템의 수신 감도에 미치는 영향을 정량적으로 분석하였다. 이를 위하여 방사 조도 측정치를 활용하여 지상에 위치한 수신기에 특정 시야각으로 직접 또는 간접적으로 입사하는 단위 면적당 태양광 전력 스펙트럼 밀도를 얻었고, 이 값을 이용하여 세기 변조/직접 검출 및 코히어런트 시스템의 성능 열화를 계산하였다. 분석 결과 주광이 수신기에 간접적으로 인가되는 경우 수신 감도 페널티가 시스템 종류에 관계없이 1.3 dB 이하였으나, 직접적으로 인가되는 경우에는 30 dB 이상의 매우 큰 수신 감도 열화가 발생하였다. 또한 이러한 수신 감도 열화는 편광자 사용 또는 광학 필터 대역폭 조절에 의해서도 거의 경감되지 않았다.

건설현장에서 발생하는 산화규소분진의 유해성 및 작업환경 개선대책에 관한 연구 (A Study on the Harmfulness of Silicon Oxide Dust and Measures for the Work Environment Improvement in Construction Sites)

  • 황정숙
    • 한국재난정보학회 논문집
    • /
    • 제18권3호
    • /
    • pp.478-486
    • /
    • 2022
  • 연구목적: 건설현장에서 작업환경측정을 하고 있으나 노출되고 있는 유해인자를 세분화하여 작업환경 측정을 하지 않고 공정별 대표적으로 노출되는 소음, 진동 등 몇 가지만 실시하고 있다. 이에 건설현장에서 가장 많이 노출되는 산화규소분진의 유해성과 현재 건설현장에서 하고있는 개선대책의 보완점을 찾고자 한다. 연구방법: 안전보건공단과 산업보건협회에서 발행하는 실태조사 보고서 및 작업환경측정 기관의 자료를 활용하여 현황을 분석하였고 산업안전보건법의 작업환경측정에 관한 규칙과 비교분석 하였다. 연구결과: 산화규소분진의 유해성을 파악하고 개선책을 보완도출하였다. 결론: 건설현장의 산화규소분진의 유해성을 도출하고 이에 따른 개선대책을 제시함으로써 현장에서 적극적으로 적용한다면 산화규소분진에 대한 직업병을 줄일 수 있을 것으로 기대된다.

Analysis of issues in gate recess etching in the InAlAs/InGaAs HEMT manufacturing process

  • Byoung-Gue Min;Jong-Min Lee;Hyung Sup Yoon;Woo-Jin Chang;Jong-Yul Park;Dong Min Kang;Sung-Jae Chang;Hyun-Wook Jung
    • ETRI Journal
    • /
    • 제45권1호
    • /
    • pp.171-179
    • /
    • 2023
  • We have developed an InAlAs/InGaAs metamorphic high electron mobility transistor device fabrication process where the gate length can be tuned within the range of 0.13㎛-0.16㎛ to suit the intended application. The core processes are a two-step electron-beam lithography process using a three-layer resist and gate recess etching process using citric acid. An electron-beam lithography process was developed to fabricate a T-shaped gate electrode with a fine gate foot and a relatively large gate head. This was realized through the use of three-layered resist and two-step electron beam exposure and development. Citric acid-based gate recess etching is a wet etching, so it is very important to secure etching uniformity and process reproducibility. The device layout was designed by considering the electrochemical reaction involved in recess etching, and a reproducible gate recess etching process was developed by finding optimized etching conditions. Using the developed gate electrode process technology, we were able to successfully manufacture various monolithic microwave integrated circuits, including low noise amplifiers that can be used in the 28 GHz to 94 GHz frequency range.

A case report of embryo transfer with air-transported fresh bovine embryo produced by multiple ovulation in Hanwoo

  • Sang-Yup Lee;Seong-Eun Heo;Won-Jae Lee
    • 한국동물생명공학회지
    • /
    • 제38권2호
    • /
    • pp.84-88
    • /
    • 2023
  • Because multiple ovulation embryo transfer (MOET) in cattle includes several benefits such as wide spreading of genetically superior offspring for long distance, this biotechnological method has been widely applied to Hanwoo. When the recipients are not stayed close after embryo recovery from donor, the embryos are moved to other farms via several vehicles (car, train, and airplane). However, air travel induces lesser oxygen level, increased vibration, lower air pressure, higher noise, and increased exposure of cosmic radiation to living things than ground level. It was still unknown that fresh embryos obtained from multiple ovulation of Hanwoo could maintain their fertility after being transported via air plane, the present case report introduced a clinical case of MOET in Hanwoo after shipping fresh embryos via air transportation. The donor was multi-ovulated via follicle-stimulating hormone series of injection, which was followed by a gonadotrophin-releasing hormone injection and artificial insemination twice. The embryos were recovered by the uterine flushing, packed in ministraws, transported to recipients for 6 h including 1 h air flight, and then transferred to the synchronized recipients. During pregnancy diagnosis of early gestation period, 5 of 7 recipients (71.4%) presented no heat signs and showed fetal sacs with fluid under transrectal ultrasonography. After normal gestation period, all recipients naturally delivered healthy calves (male n = 2 and female n = 3) without abortion, stillbirth, and premature birth. The present case report indicated that transportation of fresh embryos for MOET via domestic flight in Korea did not affect to their fertility.

Spam Image Detection Model based on Deep Learning for Improving Spam Filter

  • Seong-Guk Nam;Dong-Gun Lee;Yeong-Seok Seo
    • Journal of Information Processing Systems
    • /
    • 제19권3호
    • /
    • pp.289-301
    • /
    • 2023
  • Due to the development and dissemination of modern technology, anyone can easily communicate using services such as social network service (SNS) through a personal computer (PC) or smartphone. The development of these technologies has caused many beneficial effects. At the same time, bad effects also occurred, one of which was the spam problem. Spam refers to unwanted or rejected information received by unspecified users. The continuous exposure of such information to service users creates inconvenience in the user's use of the service, and if filtering is not performed correctly, the quality of service deteriorates. Recently, spammers are creating more malicious spam by distorting the image of spam text so that optical character recognition (OCR)-based spam filters cannot easily detect it. Fortunately, the level of transformation of image spam circulated on social media is not serious yet. However, in the mail system, spammers (the person who sends spam) showed various modifications to the spam image for neutralizing OCR, and therefore, the same situation can happen with spam images on social media. Spammers have been shown to interfere with OCR reading through geometric transformations such as image distortion, noise addition, and blurring. Various techniques have been studied to filter image spam, but at the same time, methods of interfering with image spam identification using obfuscated images are also continuously developing. In this paper, we propose a deep learning-based spam image detection model to improve the existing OCR-based spam image detection performance and compensate for vulnerabilities. The proposed model extracts text features and image features from the image using four sub-models. First, the OCR-based text model extracts the text-related features, whether the image contains spam words, and the word embedding vector from the input image. Then, the convolution neural network-based image model extracts image obfuscation and image feature vectors from the input image. The extracted feature is determined whether it is a spam image by the final spam image classifier. As a result of evaluating the F1-score of the proposed model, the performance was about 14 points higher than the OCR-based spam image detection performance.

전자산업 공정에서 사용한 부품, 기계류 세정(cleaning) 작업 안전보건 가이드 (Development of an Occupational Safety and Health (OSH) Guide for Safely Cleaning Contaminated Machinery, Equipment, and Parts Used in the Electronics Manufacturing Process)

  • 이승희;김소연;조경이;황영우;이경희;정광재;박동욱
    • 한국산업보건학회지
    • /
    • 제33권4호
    • /
    • pp.419-426
    • /
    • 2023
  • Objectives: This study aims to develop an Occupational Safety and Health (OSH) guide for the safe cleaning of contaminated machinery, equipment, and parts used in the electronics manufacturing process. Methods: A literature review, field investigations, and discussions were conducted. An initial draft of an OSH guide was developed and reviewed by experts with significant experience in maintenance work in the electronics manufacturing process in order to refine the guide. Results: Workers involved in cleaning processes with chemicals, solvents, and abrasive blasting can face exposure to a wide range of chemicals, abrasives, and noise. Identifying potential risks associated with each cleaning technique was an essential first step toward enhancing safety measures. The OSH guide comprises approximately eleven to twelve sections spanning 20-25 pages. It includes engineering and administrative protocols systematically organized to address the necessary actions before, during, and after cleaning tasks, depending on the technique. It is recommended that airline respirator masks be used in conjunction with an air purification system to ensure adherence to air quality standard "D" for atmosphere level. The use of an oil-free air compressor is advised, preferably a stationary model that does not rely on fuel sources like diesel. Conclusions: This OSH guide is designed to protect workers involved in maintenance activity in the electronics industry and aligns with global standards, such as those from the International Organization for Standardization (ISO) and Semiconductor Equipment and Material International, ensuring a higher level of safety and compliance.

심장혈관 조영술에서 씨네(cine)촬영의 프레임변화에 따른 ESD와 DAP 및 영상의 SNR·CNR 관계 분석: 10f/s과 15f/s을 중심으로 (Analysis of the Relationships Between ESD and DAP, and Image SNR·CNR According to the Frame Change of Cine Imaging in CAG : With Focus on 10 f/s and 15 f/s)

  • 정묘영;서영현;송종남;한재복
    • 한국방사선학회논문지
    • /
    • 제12권5호
    • /
    • pp.669-675
    • /
    • 2018
  • X선 장비를 이용한 심장혈관 조영술 시 프레임 변화에 따른 입사 표면 선량과 흡수선량을 비교 분석하여 피폭의 차이를 알아보고자 하였고 image J를 통한 촬영 영상의 SNR과 CNR을 측정 분석하여 프레임 변화가 영상 화질에 주는 영향을 비롯해 검사에 있어 적절한 프레임 선택의 방안을 모색하고자 하였다. 2017년 6월부터 2017년 10월까지 본원에서 CAG를 시행한 30명(남19, 여11)을 대상으로 하였고, 환자들의 연령대는 49-82세(평균 $65{\pm}9$세), 몸무게45-91kg (평균 $67{\pm}8.9kg$), 키 150-179cm (평균 $165.1{\pm}8.9kg$), BMI 19.5-30.5(평균 $24.5{\pm}2.9$)이었다. 입사표면선량 및 흡수선량은 후향적으로 Air kerma값과 DAP를 획득하여 비교 분석 하였고 SNR과 CNR은 Image J를 통하여 측정 분석 한 후 공식에 대입하여 결과 값을 도출하였다. 통계분석을 통한 상관관계 확인을 위해 통계프로그램은 SPSS를 사용하여 프레임 변화에 따른 입사표면선량과 흡수선량 및 SNR CNR의 상관관계 등을 분석하였다. 10프레임으로 촬영할 때와 15프레임으로 촬영 할 때 모두 입사표면선량과 흡수선량관계는 통계적으로 유의하지 않았다(p>0.05). SNR과 CNR의 관계에선 10프레임으로 촬영했을 때의 SNR($3.374{\pm}2.1297$)과 CNR($0.234{\pm}0.2249$)이 15프레임에서의 SNR($4.929{\pm}2.8532$)과 CNR($0.391{\pm}0.3025$)보다 SNR $1.43{\pm}0.4861$, CNR $0.132{\pm}0.0555$로 낮았으나 통계적으로는 유의하지 않았다(p>0.05). 상관관계 분석결과에서는 BMI와 air kerma, DAP간에, air kerma와 DAP간에, SNR과 CNR간에 통계적으로 유의한 결과를 얻었다(p<0.001, p<0.001). 결론적으로 심장혈관 조영술 시 10프레임과 15프레임으로 변화를 주어 촬영하여도 입사표면선량과 흡수선량은 큰 차이를 나타내지 않았으며, 10프레임보다 15프레임 촬영에서의 SNR과 CNR이 증가하였으나 통계적으로는 유의하지 않았기에 본 논문을 통해 환자와 시술자 모두 10프레임과 15프레임 촬영으로 인한 X선 피폭 문제뿐 아니라 영상의 화질감소에 관한 우려 역시 줄어들 수 있을 것으로 사료된다.

GATE 시뮬레이션을 사용한 알루미늄 부가필터 두께에 따른 Digital Radiography의 영상 화질 비교 평가 (Comparison Evaluation of Image Quality with Different Thickness of Aluminum added Filter using GATE Simulation in Digital Radiography)

  • 오민주;홍주완;이영진
    • 한국방사선학회논문지
    • /
    • 제13권1호
    • /
    • pp.81-86
    • /
    • 2019
  • X-선 영상에서 필터를 통한 여과의 역할은 영상 형성에 유용한 광자를 이용해 환자의 피폭량을 낮춤과 동시에 영상의 대조도를 높이는 것이다. 영상을 형성하는 데 있어서 저에너지 X-선은 환자 조직의 최초 몇 cm 부위에서 흡수되고 고에너지 부분만을 통과하여 형성되므로, 방사선 여과는 여과물질을 삽입하여 저에너지 X-선을 여과물질로 하여금 흡수시켜 환자의 피폭량을 낮추고 영상의 질을 높인다. 본 연구의 목적은 시뮬레이션을 통해 이상적인 환경에서 부가 필터가 방사선 영상 촬영 시 영상의 화질에 미치는 영향을 확인하고, 실제 방사선 영상을 촬영할 경우와 비교하는 것이다. 이를 위해 시뮬레이션 프로그램인 Geant4 Application for Tomographic Emission (GATE)를 이용해 Polymethylmethacrylate (PMMA) Phantom의 실제 크기, 모양과 재질을 모사하고 부가 필터의 사용유무 및 필터의 두께에 따른 촬영 조건을 설정하여 시뮬레이션 결과 영상을 얻어냈다. 또한, Digital Radiography (DR)장비로 실제 PMMA Phantom을 필터가 없는 경우와 필터가 있을 때 그 두께를 변화시키며 촬영했다. 시뮬레이션의 결과 영상과 실제 실험을 통해 얻은 영상을 각각 Image J 프로그램을 이용해 Contrast-to-noise ratio (CNR) 평가를 실행한 뒤, 시뮬레이션 결과 영상과 최종적으로 도출된 두 영상의 변화 추이를 비교 측정했다. 실험 결과 DR장비와 시뮬레이션 영상 모두 CNR이 감소하는 추세를 보였으며, 이는 결국 영상에서의 대조도 감소로 인해 나타난 결과였다. 이론적으로 관전압 (kVp)이 증가하면 대조도가 감소하고, 이를 통해보았을 때 필터는 저에너지부의 X-선을 흡수하면서 전체적인 선량을 감소시키지만, X-선의 평균에너지를 증가시키는 역할을 한다는 것을 알아볼 수 있었다.

직장인의 직무만족도 관련요인 분석 - NIOSH의 직무스트레스 모형을 적용하여 - (Factors Related with Job Satisfaction in Workers - Through the Application of NIOSH Job Stress Model -)

  • 김순례;이복임;이종은;이경용;정혜선
    • 지역사회간호학회지
    • /
    • 제14권2호
    • /
    • pp.190-199
    • /
    • 2003
  • This study was conducted to determine the factors affecting job satisfaction in workers by using the Job Stress Model proposed by the National Institute for Occupational Safety and Health (NIOSH). Data were collected from December 1 to December 30, 1999. The subjects were 2,133 workers employed at 155 work sites, who were examined using NIOSH Job Stress questionnaire translated by the Korea Occupational Safety ${\pounds}|$ Health Academy and Occupational Safety ${\pounds}|$ Health Research Institute. SAS/PC program was used for statistical analysis using descriptive analysis. Pearson's correlation coefficient, ANOVA, and Stepwise multiple regression analysis. The results of this study were as follows. 1. According to general characteristics of the subjects, job satisfaction was high in those with less number of children. 2. By work condition, job satisfaction was higher in those who were working in a permanent job position, were working with regular time basis than with shift basis, were working in regular shift hours than in changing shift hours, were working for a short period, and were working less hours and overtime works per week. 3. In terms of physical work environment, job satisfaction was significantly related to 10 physical environmental factors. In other words, job satisfaction was high in workers who were working in an environment with no noise, bright light, temperature adjusted to an appropriate level during summer and winter, humidity adjusted to an appropriate level. well ventilation, clean air, no exposure to hazardous substance during work hour, overall pleasant work environment and not crowded work space. 4. By work-related factors, job satisfaction was high in those with less ambiguity about future job and role, high job control/autonomy, and less workload. On the other hand, job satisfaction was low in those with little utilization of competencies, and much role conflict at work and workload. 5. As for the relationships between job satisfaction and the non-work related factors, job satisfaction was high in workers who were volunteering at different organizations or active in religious activities for 5-10 hours per week. 6. In the relationships between job satisfaction and buffering factors, significantly positive correlations were found between job satisfaction and factors such as support by direct superior, support by peers, and support by spouse, friend and family. 7. There were nine factors that affected job satisfaction in the workers: age, number of children, work hours per week, noise, temperature at the work site during summer, uncomfortable physical environment, role ambiguity, role conflict, ambiguity in job future, work load, no utilization of competencies and social support from direct supervisor. These nine factors accounted for 26% of the total variance in the multiple regression analysis. In conclusion. the following are proposed based on the results of this study. 1. The most important physical environmental factors affecting job satisfaction in workers were noise, role ambiguity, and work load, suggesting a need to develop strategies or programs to manage these factors at work sites. 2. A support system that could promote job satisfaction is needed by emphasizing the roles of occupational health nurses who may be stationed at work sites and manage the factors that could generate job stress. 3. Job satisfaction is one of the three acute responses to stress proposed in NIOSH job stress model (job satisfaction. physical discomfort and industrial accidents). Therefore, further studies need to be conducted on the other two issues.

  • PDF