• Proceedings of the KIEE Conference
• /
• 1992.07a
• /
• pp.305-307
• /
• 1992

This paper presents a technique, which identifies both process noise covariance and sensor noise covariance by using innovation correlation test. A correlation test, which checks whether the square root Kalman filter is workingly optimal or not, is given. The system is stochastic autoregressive moving-average model with auxiliary white noise Input. The linear quadratic Gaussian control is used for minimizing stochastic cost function. This paper indentifies Q, R, and estimates parametric matrics $A(q^{-1}),B(q^{-1}),C(q^{-1})$ by means of extended recursive least squares and model reference control. And The proposed technique has been validated in simulation results on the fourth order system.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.371-376
• /
• 2003

The objective of this paper is to compare the site-to-site variability of ISO 10844 pass-by-noise test sites. In order to investigate the site-to-site variance of test surfaces, European commercial tires are tested at seven different test sites. Three Korea test sites and four Europe test sites are selected.. The pass by noise test is executed according to a 2001/43/EC regulation. A]though the ISO surface has a very specific track composition, it does not reduce the variation of pass-by-noise measurements over the surface of test sites. This paper shows that the test results of pass-by-noise level are different depending on the test sites. The correlation obtained in this work is able to predict the pass by noise level for certain test site using the data measured from another test site. 17he prediction value is range with an error within 1dB(A).

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.4
• /
• pp.327-334
• /
• 2014

This paper presents a method of fault detection and fault localization from acoustic noise measurements. In order to detect the presence of noise sources wavelet transform is applied to acoustic signal. In addition, a cross correlation based method is proposed to calculate the exact location of the noise allowing the user to quickly diagnose and resolve the source of the noise. The fault detection system is implemented using two microphones and a computer system. Experimental results show that the system can detect faults due to artifacts accidentally inserted during the manufacturing process and estimate the location of the fault with approximately 1 cm precision.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.10a
• /
• pp.483-488
• /
• 2013

The psychoacoustic quality of ABS is now considered more important than before as the focus of recent ABS function is expanded to basic function from typical emergency function. Thus, the automotive parts manufacturing companies are actively working to improve NVH (Noise, Vibration, and Harshness) in ABS module. In terms of time, test place, and cost, however, it is very inefficient to have all the operating noise validation test in real vehicle configuration especially for partially improved ABS module. To contribute to reducing the development period and to grasping the improvements faster, this research presents the study of a correlation to predict ABS operating noise inside vehicle via HILS rig test. The regression equation in this paper was statistically drawn from using Minitab S/W, and based on that equation, the noise spectrum of vehicle interior was analogized.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.13 no.1
• /
• pp.28-32
• /
• 2002

Background and Objective : Classical singing students who have received in systematic voice training appeared distinctive voice characteristics compared to normal people who have not received in systematic voice training. The purpose of this study was to determine the correlation between acoustic parameters and Electroglottography(EGG) parameters in two groups(ordinary college students vs. classical singing students group). Materials and Methods : The 80 ordinary college students and 65 classical singing students participated in this study by utilizing Dr. speech program to obtain acoustic measurements and physiologic measurements simultaneously. The Pearson correlation coefficient was used to find the correlation between acoustic parameters and EGG parameters in two groups(ordinary college students group and classical singing students group). Results : The results of the study were as follows : First, there was no correlation between Jitter and EGG Jitter in ordinary college students group, but there was strong correlation between Jitter and EGG Jitter in classical singing students group. Second, there was no correlation between Shimmer and EGG Shimmer in ordinary college students group, but there was strong correlation between Shimmer and EGG Shimmer in classical singing students group. Third, there was no correlation between Harmonic to Noise Ratio(HNR) and EGG HNR in ordinary college students group, but there was strong correlation between HNR and EGG HNR in classical singing students group. Finally, there was no correlation between Normalized Noise Energy(NNE) and EGG NNE in two groups.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.9
• /
• pp.972-981
• /
• 1992

In this paper, the performance of linear and hard-limiting correlation receivers for DS/SSMA BPSK power line communication system is analyzed. Strong impulsive noise of power line is modeled with Chan's noise model, and the performance of both receivers is analyzed in terms of parameters such as ratio of power spectrum density of impulsive noise to that background noise, ratio in impulsive noise width th that of data bit, and interarrival time of impulsive noise. And also multiple access capacity is evaluated with Gaussian approximation of multiple access interference. The results of this analysis reveal that the performance of linear correlation receiver is superior to that of hard-limiting correlation receiver when $N_1/N_b$ is small and is close to 1. But the BER and the multiple access capacity of hard-limiting correlation receiver becomes better in comparison with linear correlation receiver as $N_1/N_b$ increases.

• Journal of KSNVE
• /
• v.7 no.2
• /
• pp.255-260
• /
• 1997

This paper describes 3-dimensional volume array of 4 microphones including a reference microphone which is capable of imaging wideband noise source position in 2-dimensional image plane. The cross correlation function and corresponding imaging function between a reference microphone and other microphone, are derived as a function of noise source position. The magnitude of the imaging function gives noise source mapping in image plane. Since the image plane is selective from a rectangular and a cylindrical plane, noise source position information such as range and bearing relative to the array is identified very much easily. Simulation results for typical source configurations confirms the applicability of the proposed array in noise control field.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.611-616
• /
• 2002

Bearing diagnostics is difficult in a gearbox because bearing signals are masked by the strong gear signals. Self adaptive noise cancellation(SANC) is useful technique to seperate bearing signals from gear signals. While gear signals are correlated with a long correlation length, bearing signals are not correlated with a short length. SANC seperates two components on the basis of correlation length. Then we can find defect frequency component in the envelope spectrum of the bearing signals.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11a
• /
• pp.362.2-362
• /
• 2002

Bearing diagnostics is difficult in a gearbox because bearing signals are masked by the strong gear signals. Self adaptive noise cancellation(SANC) Is useful technique to seperate bearing signals from gear signals. While gear signals are correlated with a long correlation length, bearing signals are not correlated with a short length. SANC seperates two components on the basis of correlation length. (omitted)

• Journal of electromagnetic engineering and science
• /
• v.9 no.3
• /
• pp.130-140
• /
• 2009

The design theory and experimental results of a true random noise radar system are presented in this paper. Target range information can be extracted precisely by correlation processing between the delayed reference and the signal received from a target, and the velocity information by the Doppler processing with successive correlation data. A K-band noise radar system was designed using random FM noise signal, and the characteristics of the fabricated system were examined with laboratory and outdoor experiments. A C-band random FM noise signal was generated by applying a low-frequency white Gaussian noise source to VCO(Voltage Controlled Oscillator), and a K-band Tx noise signal with 100 MHz bandwidth was obtained by using a following frequency multiplier. Two modified wave-guide horn arrays were designed and fabricated, and used for the Tx and Rx antennas. The required amount of Tx/Rx isolation was attained by using a coupling cancellation circuit as well as keeping them apart with predetermined spacing. A double down-conversion scheme was used in the Rx and reference channels, respectively, for easy post processing such as correlation and Doppler processing. The implemented noise radar performance was examined with a moving bicycle and a very high-speed target with a velocity of 150 m/s. The results extracted by the Matlab simulation using the logging data were found to be in a reasonable agreement with the expected results.