• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.8
• /
• pp.3053-3059
• /
• 2010

In DS-CDMA method, Mobile Stations own jointly one radio channel and are made to use a PN code (Pseudo-Noise Code) for the purpose of minimize interference. However, corelation value of PN code is one when time delay is zero but the corelation value is 1 / N when time delay is not 0. Therefore corelation characteristic does not fully attained. As a result, when the user increase, the performance degradation and system capacity problem will be able to occur by interference among users. In this paper, the PN code has ideally self corelation. It was proved that PN code could depress interference from other users in multiple access system.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.6
• /
• pp.17-25
• /
• 2001

Traditional adaptive noise cancelling methods rely their performance on various interfering parameters, such as convergence speed, tracking ability, numerical stability, relative frequency characteristics between target and reverberation signals, and activity of the target. In this paper, an adaptive noise cancelling method is suggested, which Provides a successful tradeoff mon these factors. It is designed to work on the transform domain, adopts the Gram-Schmidt orthogonalization process, and is implemented by the escalator algorithm. The transform domain approach supports a tradeoff between the convergence speed and numerical cost. The proposed method is verified by applying a real-data collected in the shallow waters off the east coasts of korea. It is shown that it has a good reverberation-rejection capability even for the target signal with adjacent frequency components to those of the reverberation, and its performance is invariant for the activity of the target.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.2 s.117
• /
• pp.177-182
• /
• 2007

This paper presents the InGaP/GaAs HBT differential LC VCO with low phase noise performance for adaptive feedback interference cancellation system(AF-lCS). The VCO is verified with enhanced tank structure including filtering technique. The output tuning range for proposed VCO using asymmetric inductor and symmetric capacitors withlow pass filtering technique is 207 MHz. The output powers are -6.68 including balun and cable loss. The phase noise of this VCO at 10 kHz, 100 kHz and 1 MHz are -102.02 dBc/Hz, -112.04 dBc/Hz and -130.40 dBc/Hz. The VCO is designed within total size of $0.9{\times}0.9mm^2$.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.11
• /
• pp.1468-1473
• /
• 2018

The importance of communication and data processing is increasing with the advance of the Fourth Industrial Revolution. Hence, the importance of video and data processing technologies, which directly influence the accuracy and reliability of equipment, is also increasing. In this research report we propose an algorithm for calculating the final output by estimating the standard deviation and estimate required for removing AWGN while adapting to changes in the frequency factors of video. This algorithm calculates the final output by checking an estimated value against the effective pixel range, which is obtained from the standard deviation of mask factors. Subsequently, the weighted value is computed, taking into account the filter output. To evaluate the functionality of this algorithm, it is compared with the most-commonly used present method through simulation. The simulation results show that the important features of the image are preserved and efficient noise cancellation performance is demonstrated.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.6
• /
• pp.636-642
• /
• 2019

In this paper, we analyzed BER (Bit Error Rate) communication performance according to the detection order of MMSE (Minimum Mean Square Error) based soft decision interference cancellation. As the detection order method, antenna index order method, absolute value magnitude order method of channel elements, absolute value sum order method of channel elements, and SNR (Signal Noise Ratio) order method are proposed. BER performance for the scheme was measured and analyzed. As a simulation environment, 16-QAM (Quadrature Amplitude Modulation) modulation is used in an uncoded environment of an M×M multiple-input multiple-output system, and an independent Rayleigh attenuation channel is considered. The simulation results show that the performance gain is about 1.5dB when the SNR-based detection order method is M=4, and the performance gain is about 3.5dB when M=8 and about 3.5dB when M=16. The more BER performance was confirmed, the more the detection order method of the received signal prevented the interference and error spreading occurring in the detection process.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.5
• /
• pp.152-159
• /
• 2016

This paper describes an offset and 1/f noise cancellation technique based hall sensor signal processor. The hall sensor outputs a hall voltage from the input magnetic field, which direction is orthogonal to hall plate. The two major elements to complete the hall sensor operation are: the one is a hall sensor to generate hall voltage from input magentic field, and the other one is a hall signal process system to cancel the offset and 1/f noise of hall signal. The proposed hall sensor splits the hall signal and unwanted signals(i.e. offset and 1/f noise) using a spinning current biasing technique and chopper stabilizer. The hall signal converted to 100 kHz and unwanted signals stay around DC frequency pass through chopper stabilizer. The unwanted signals are bloked by highpass filter which, 60 kHz cut off freqyency. Therefore only pure hall signal is enter the ADC(analog to dogital converter) for digitalize. The hall signal and unwanted signal at the output of an amplifer and highpass filter, which increase the power level of hall signal and cancel the unwanted signals are -53.9 dBm @ 100 kHz and -101.3 dBm @ 10 kHz. The ADC output of hall sensor signal process system has -5.0 dBm hall signal at 100 kHz frequency and -55.0 dBm unwanted signals at 10 kHz frequency.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.1
• /
• pp.18-25
• /
• 2018

In this paper, we present a low-power implementation of the multi-channel hearing aid system using a general-purpose DSP chip. The system includes an acoustic amplification algorithm based on Wide Dynamic Range Compression (WDRC), an adaptive howling canceller, and a single-channel noise reduction algorithm. To achieve a low-power implementation, each algorithm is re-constructed in forms of integer program, and the integer program is converted to the assembly program using BelaSigna(R) 250 instructions. Through experiments using the implementation system, the performance of each processing algorithm was confirmed in real-time. Also, the clock of the implementation system was measured, and it was confirmed that the entire signal processing blocks can be performed in real time at about 7.02MHz system clock.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.3
• /
• pp.13-18
• /
• 2011

Sphere Decoding (SD) is a decoding technique able to achieve the Maximum Likelihood (ML) performance in fading environments; nevertheless, the main disadvantage of this technique is its high complexity, especially in poor channel conditions. In this paper, we present an adaptive hybrid algorithm which reduces the conventional Sphere Decoder's complexity and keeps the ML performance. The system called Adaptive OSIC-SD modifies its operation based on Signal to Noise Ratio (SNR) information and achieves an optimal performance in terms of Bit Error Rate (BER) and complexity. Through simulations, we probe that the proposed system maintains almost the same bit error rate performance of the conventional SD, and exhibits a lower, quasi-constant complexity.

• The Journal of the Korea Contents Association
• /
• v.6 no.12
• /
• pp.89-95
• /
• 2006

The performance of blind source separation(BSS) using independent component analysis (ICA) declines significantly in a reverberant environment. A post-processing method proposed in this paper was designed to remove the residual component precisely. The proposed method used modified NLMS(normalized least mean square) filter in frequency domain, to estimate cross-talk path that causes residual cross-talk components. Residual cross-talk components in one channel is correspond to direct components in another channel. Therefore, we can estimate cross-talk path using another channel input signals from adaptive filter. Step size is normalized by input signal power in conventional NLMS filter, but it is normalized by sum of input signal power and error signal power in modified NLMS filter. By using this method, we can prevent misadjustment of filter weights. The estimated residual cross-talk components are subtracted by non-stationary spectral subtraction. The computer simulation results using speech signals show that the proposed method improves the noise reduction ratio(NRR) by approximately 3dB on conventional FDICA.

• Progress in Superconductivity
• /
• v.13 no.1
• /
• pp.1-6
• /
• 2011

Measurement of magnetic signals generated from electric activity of myocardium provides useful information for the functional diagnosis of heart diseases. Key technical component of the magnetocardiography (MCG) technology is SQUID. To measure MCG signals with high signal-to-noise ratio, sensitive SQUID magnetic field sensors are needed. Present magnetic field sensors based on Nb SQUIDs have field sensitivity good enough to measure most of MCG signals. However, for accurate measurement of fine signal pattern or detection of local atrial fibrillation signals, we may need higher field sensitivity. In addition to field sensitivity, economic aspect of the SQUID system is also important. To simplify the SQUID readout electronics, the output voltage or flux-to-voltage transfer of SQUID should be large enough so that direct measurement of SQUID output can be done using room-temperature preamplifiers. Double relaxation oscillation SQUID (DROS), having about 10 times larger flux-to-voltage transfers than those of DC-SQUIDs, was shown to be a good choice to make the electronics compact. For effective cancellation of external noise inside a thin economic shielded room, first-order axial gradiometer with high balance, simple structure and long-baseline is needed. We developed a technology to make the axial gradiometer compact using direct bonding of superconductive wires between pickup coil and input coil. Conventional insert has mechanical support to hold the gradiometer array, and the dewar neck has equal diameter with the dewar bottom. Boiling of the liquid He can generate mechanical vibrations in the gradiometer array due to mechanical connection structure. Elimination of the mechanical support, and direct mounting of the gradiometer array into the dewar bottom can reduce the dewar neck diameter, resulting in the reduction of liquid He consumption.