• Restorative Dentistry and Endodontics
• /
• 제20권1호
• /
• pp.1-16
• /
• 1995

The purpose of this study was to investigate the effect of dentin bonding agents on the bond strength of composite resin restorations in case of applying the dentin bonding agents to acid etched enamel surfaces. Freshly extracted 364 bovine anterior teeth were selected as a adherents. 320 enamel specimens were divided into two groups(unetched group (1) and etched group (2) for testing the shear bond strength, 40 specimens were used for the hardness testing, and 4 specimens of rest were to observe the resin-tag formation into etched enamel surfaces. All surfaces of enamel specimens were polished with 320~1500 SiC paper under continuous running water. In Group (1), 100 enamel specimens were polished and unetched. 220 polished enamel specimens in Group (2) were etched with 37 % phosphoric acid solution for 60 seconds, washed with water for 20 seconds, and dried with a light air pressure for 60 seconds. Three kinds of dentin bonding agents(Gluma, Prisma, Scotchbond 2) were evaluated the effect on the bond strength to conditioned enamel surfaces. Shear bond strengths were measured on the three cases such as a coating of primer only, a coating of sealer only, and a sequential coating of primer and sealer to acid etched enamel surfaces were compared with the bond strengths measured by the coating of enamel bonding agent followed by the bonding of composite resin (Photo clearfil bright, Kuraray, Japan) to unetched and acid etched enamel surfaces. In addition, the hardness tested on the adhesive fractured surface between composite resin enamel as a mean of evaluation of a factor whether the mechanical bond strengths were affected and the penetration of dentin bonding agents into etched enamel surfaces was also observed. Bond strengths were measured using the method of shear bond strength by a universal testing machine (Instron-4467, USA), statistical test were applied to the results using a one way analysis variance(ANOVA), and hardness was measured by the Vicker's Hardness Tester(MHT-i, Matsuzawa, Japan) and the penetration of the resins were observed by the SEM (Hitachi, S-2300, Japan). The following conclusions were drawn; 1. Enamel bonding agent showed to affect the improvement of bond strength of composite resin to enamel surface both unetched and etched. 2. Dentin bonding agents could be resulted in increase of bond strength to unetched enamel surface, but there were no statistical significances. 3. Bond strengths to etched enamel surface were significantly decreased with a coating of dentin primer only. 4. Coating of sealer only and coating of primer and sealer noticed the similar bond strengths of composite resin to etched enamel using the enamel bonding agents. 5. The applying method proved to be more effective than the kinds of dentin bonding agents on the bond strength of composite resin to etched enamel than the kind of dentin. 6. Vicker's hardness numbers of dentin bonding agents were lower than that of composite resin, but the degree of penetration of dentin bonding agents into etched enamel surfaces was excellent.

• Restorative Dentistry and Endodontics
• /
• 제22권1호
• /
• pp.61-75
• /
• 1997

The bond strengths of composite resin to tooth dentin vary with the methods of cavity preparation and surface treatment. Recent developments in techniques of dentinal surface treatment have renewed interest in microabrasive as a means of tooth preparation, The purpose of this study was to determine the effects of a new method of cavity preparation on the bond of composite resin to dentin. Freshly extracted 144 healthy human third molars were used in this study. The dentin surfaces prepared with #600 SiC abrasive paper were divided into control and air abrasion groups according to the method of dentin surface preparation using different combinations of delivery pressure, time, and acid etching. The shear bond strengths were measured after the composite resin (Clearfil Photo Bright) was bonded to prepared dentin surfaces by light-curing using a dentin bonding system (All-bond 2), In addition, the average surface roughness was measured to investigate the effect of differently prepared dentin surfaces on the shear bond strengths. The surface changes of prepared dentin and the debonded dentin surfaces were observed with SEM (S-2300, Hitachi Co., Japan). The following results from this-study were obtained ; 1. There was no significant difference of shear bond strengths according to the changes of delivery pressure and time. 2. The shear bond strengths were lower than the control in the air abraded-only groups, but those of the additional acid-etched groups were higher than the control. 3. The shear bond strengths to all air-abraded surfaces were increased by acid etching. 4. The correlation between shear bond strengths and surface roughness was not certain, although the mean surface roughness of all air-abraded surfaces has increased evidently while it has slightly decreased for additional acid etching. 5. On SEM examination, the dentinal tubules were almost occluded in the air abraded-only groups, but those were opened in the additional acid-etched groups. 6. The debonded surfaces were showed adhesive failure mode in the air abraded- only groups, while those were showed mainly the mixed and cohesive failure mode in the additional acid-etched groups. These results suggest that the layer produced during cavity preparation or surface treatment with air abrasion must be removed for maximum bond strength of composite resin to dentin.

• 산업식품공학
• /
• 제15권1호
• /
• pp.1-5
• /
• 2011

Codonopsis lanceolata L. (Campanulaceae) has long been used in traditional Korean medicine to treat bronchitis, cough, and inflammatory diseases, however, the efficacy of anti-tumor activities remains to be defined. In this study the effects of Codonopsis lanceolata (C. lanceolata) on proliferation, migration and adhesion in lung (A549, H1299) and ovarian cancer (SKOV-3) cells were investigated. To assess and compare the pharmacological effects and production places of C. lanceolata, the ethanolic extracts of C. lanceolata from different places in Korea (Hongseong, Yecheon, Yeongwol, Yanggu, Gangjin, and Hoengseong) were prepared. The extract from Hoengseong county did have only marginal anti-proliferative activity in all the cell lines tested, however, other extracts had little or no effect on cell proliferation. The extracts from Hongseong, Gangjin or Hoengseong county had partial anti-migratory activity in lung cancer cells, but not in ovarian cancer cells. In addition, the extract from Hoengseong county had partial anti-adhesive activity in ovarian cancer cells, however, other extracts did not affect cell adhesion in both lung and ovarian cancer cells. Taken together, these findings provide the first description of anti-tumor efficacy of C. lanceolata from different production places in Korea, and suggest that C. lanceolata from Hoengseong county may have therapeutic potential in lung and ovarian cancers.

• 헤리티지:역사와 과학
• /
• 제55권1호
• /
• pp.51-61
• /
• 2022

도기 말머리장식 뿔잔은 부산광역시 동래구 복천동 제7호 무덤에서 출토되었다. 뿔을 본떠 흙으로 만든 것으로 액체를 담아 사용된 것으로 생각되며 신라·가야 지역의 무덤에서 여러 형태의 뿔잔이 다수 출토되었다. 뿔잔 2점이 한 쌍으로 출토되었으며 크기는 서로 다르지만 전체적인 형태와 제작 기법은 거의 동일하다. 이번 처리를 마친 유물은 발굴된 두 개의 뿔잔 중에 큰 형태에 해당하며 구연부를 중심으로 말머리장식 쪽으로 균열이 두 군데에 있었으며 소실된 편도 관찰되었다. 뿔잔은 말의 가슴을 바닥에 닿게 하고 이를 중심으로 한쪽은 말머리를 장식하고 반대쪽은 원추형의 뿔잔 입구가 있고 뒤쪽에 2개의 다리를 붙여 뿔잔의 균형을 맞춘 U자형의 형태이다. 뿔잔의 표면은 물레로 성형하고 말머리와 연결된 부분은 깎아 다듬은 자국이 있다. 말머리의 형상은 간결하게 귀·눈·코와 입 등 특징을 잘 파악하여 사실적으로 표현했으며 색은 회색이다. 이 연구에서는 비파괴 상태조사를 통하여 내부 구조를 알아보는 등 제작 특성을 알아보고자 하였다. C·T영상을 통하여 제작 기법을 알아보고 상태를 진단하여 과학적 보존처리를 통해 유물을 안정화 하였다. 보존상태 정밀진단 결과, 구연 두 곳에 결손부분이 있고 균열이 연장된 것을 확인하였다. 이 중 한 곳은 균열에 이격이 더해진 상태로 접합이 된 상태였다. 과거 접합이 이루어진 재료를 수습하여 적외선 분광분석을 실시한 결과, 질산셀룰로오스계 수지가 사용된 것을 알 수 있었다. 따라서 이번 보존처리는 과거의 재료를 제거하고 균열의 확산을 방지하는 데 중점을 두고 진행하였다. 보존처리 전 상태조사 및 과학적 조사를 실시하여 도기 말머리장식 뿔잔(보물)에 대한 자료를 확보하고, 이를 바탕으로 효과적인 보존처리 방안 모색, 기존 접착제의 안전한 제거 및 복원 재료의 가역성을 고려하여 선택하고 보존처리는 전문가 자문회의를 통해 최상의 방법으로 실시하였다.