• Transactions on Electrical and Electronic Materials
• /
• v.5 no.3
• /
• pp.98-103
• /
• 2004

The plasma properties in the facing target sputtering system during carbon nitride film deposition have been investigated. The ionized nitrogen species of the deposited films increased with increasing discharge current and were independent of the nitrogen pressure. The nitrogen content in the films did not vary significantly with the variation of nitrogen gas. The electron temperature was high close to that in the inter-cathode region, reduced as the electrons moved away from the most intense region of magnetic confinement and increased again outside this region. Calculations based on the film composition showed that the ion to carbon atom ratio at the substrate was about 50 and that the ratio between the ionized and neutral nitrogen molecules was about 0.25.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.8
• /
• pp.51-56
• /
• 2008

Aluminum foam material has unique properties that make them useful in applications to the automobile, construction and railroad industries. In this study, aluminum was plasma-treated using nitrogen gas to improve fracture behavior between aluminum and aluminum foam material. SLS specimens were used for fracture tests. They were performed using plasma-treated and untreated aluminum/aluminum foam specimens. It was shown that the fracture strength and the tincture toughness of aluminum/aluminum foam were improved ${\sim}86%\;and\;{\sim}250%$, respectively when the aluminum was plasma-treated using nitrogen gas.

• 한국연소학회:학술대회논문집
• /
• 2015.12a
• /
• pp.189-192
• /
• 2015

An experimental study was conducted to find the effect of DBD plasma on the flammability limits of inert-gas-diluted fuel. The results showed that the concentration of diluting nitrogen at flammability limit increased when nitrogen-diluted methane and propane were reformed by plasma, while it decreased when nitrogen-diluted ethylene was reformed by plasma. Gas chromatography results suggested that the fuel type dependence of flammability limits is due to the difference in the concentrations of hydrogen and hydrocarbon species in reformed fuel.

• Journal of Nutrition and Health
• /
• v.27 no.7
• /
• pp.699-708
• /
• 1994

This study aimed to verify the nutritional and curative effects of protein hydrolysate in rats with cysteamine-induced duodenal uncer. Duodenal ulcer rat model was established by intraperitoneal injections of cysteamine. Sprague-Dawley, female rats weighing approximately 200g were intraperitoneally injected twice cysteamine(13mg/100g BW) at intervals of 3h per day. This procedure was repeated 3$\times$at intervals of 3d. Animals fed on 10% casein diet for infection periods. After last injection, 4 kinds of diets(10% casein, 20% casein, 10% casein hydrolysate, 20% casein hydrolysate) were given. Gastric montility, trypsin activity in gastrointestinal content, retention rate of nitrogen, plasma total protein, albumin, amino-N, urinary urea nitrogen, creatinine and hydroxyproline were analyzed for nutritional effects of dietary nitrogen levels(10%, 20%) and sources(casein, casein hydrolysate). In duodenal ulcer rat model, there was no differences between 20% casein diet and 20% casein hydrolysate in the view of severeness of ulcer, gastric emptying rate, serum total protein, serum albumin, plasma $\alpha$-amino-N, UUN, creatinine excretion, GFR, nitrogen retention. On the other hand, rats on 10% casein hydrolysate diet group had more curative effect of the ulcer, higher plasma albumin concentration and nitrogen retention than 10% casein diet group. The casein hydrolysate diet group was lower trypsin activity in small intestinal content than the casein diet group, at both nitrogen levels(10%, 20%). The results suggest that protein hydrolysate be applied in diet therapy for the patients with gastrointestinal ulcer.

• Applied Chemistry for Engineering
• /
• v.33 no.1
• /
• pp.71-77
• /
• 2022

To increase biomass utilization, rice husk-based activated carbon (RHAC) followed by nitrogen plasma surface treatment was prepared and the electric double-layer capacitor performance was investigated. Through nitrogen plasma surface treatment, up to 2.17% of nitrogen was introduced to the surface of RHAC, and in particular the sample reacted for 5 min with nitrogen plasma showed dominant formation of pyrrolic/pyridine N functional groups. In addition, mesopores were formed on the RHAC material by the removal of silica, and the surface roughness of the carbon material increased by nitrogen plasma surface treatment, resulting in the formation of many micropores. As a result of cyclic voltammetry measurement, at a scan rate of 5 mV/s, the specific capacitance of the RHAC treated with nitrogen plasma increased up to 200 F/g, showing an 80.2% improvement compared to that of using untreated RHAC (111 F/g). This is attributed to the synergetic effect of the introduction of pyrrolic/pyridine-based nitrogen functional groups and the increase of the micropore volume on the surface of the carbon material. This study has a positive effect on the environment in terms of recycling waste resources and using plasma surface treatment.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.1
• /
• pp.39-44
• /
• 2014

Silicon nitride thin film deposited with Plasma Enhanced Chemical Vapor Deposition was treated by a nitrogen plasma generated by Inductively Coupled Plasma at room temperature. The treatment was investigated by Fourier Transform Infrared Spectroscopy and Atomic Force Microscopy on the surface at various RF source powers at two RF bias powers. The amount of hydrogen was reduced and the surface roughness of the films was decreased remarkably after the plasma treatment. In order to understand the causes, we analyzed the plasma diagnostics by Optical Emission Spectroscopy and Double Langmuir Probe. Based on these analysis results, we show that the nitrogen plasma treatment was effective in the improving of the properties silicon nitride thin film for flexible display.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.198.2-198.2
• /
• 2016

Reactive oxygen and nitrogen species (RONS) can be generated by using non-thermal atmospheric pressure plasma jet which have profound biomedical applications [1, 2]. In this work, reactive oxygen species like hydroxyl radical (OH) are generated by using non-thermal direct plasma jet above water surface using Ar gas and their properties have been studied using ultraviolet absorption spectroscopy. OH radicals are found to be generated simultaneously with the discharge current with concentration of $2.7{\times}1015/cm3$ at 7mm above water surface while their persistence time have been measured to be $2.8{\mu}S$. In addition, it has been shown that plasma initiated ultraviolets play a major role to generate RONS inside water. Further works are going on to measure the temporal behavior of OH and $O2^*-$.

• Journal of Biosystems Engineering
• /
• v.24 no.6
• /
• pp.465-472
• /
• 1999

To remove nitrogen oxides(NOx) in exhaust gas of diesel engine, three-way catalytic process with plasma discharger has great possibilities. Characteristics of NOx removal depends on NO conversion to NO$_2$and/or HNO$_3$due to high activation energies for NO oxidation and reduction. NOx removal efficiency by using three-way catalytic with plasma discharger indicated about 50% at 40watt power consumption condition.

• Journal of Advanced Marine Engineering and Technology
• /
• v.23 no.6
• /
• pp.755-760
• /
• 1999

To remove nitrogen oxides(NOx) in exhaust gas of diesel engine three-way catalytic process with plasma discharger has great possibilities. Characteristics of NOx removal depends on NO conver-sion to $NO_2$ and /or $HNO_3$ due to high activation energies for NO oxidation and reduction, NOx removal efficiency by using three-way catalytic with plasma discharger indicated about 50% at 40watt power consumption condition.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.7 no.8
• /
• pp.83-90
• /
• 1999

To remove nitrogen oxides(NOx) in exhaust gas of diesel engine, three-way catalytic process with plasma discharger has great possbilities. Characteristics of NOx removal depends on NO conversion to $NO_2$ and/or $HNO_3$ due to high activation energies for NO oxidationand reduction. NOx removal efficiency by using three-way catalytic with plasma dischager indicated about 50% at 40 watt power consumption condition.