• Journal of Physiology & Pathology in Korean Medicine
• /
• v.19 no.6
• /
• pp.1615-1621
• /
• 2005

Reactive oxygen species (ROS) and reactive nitrogen species (RNS) are widely implicated in the aging process and age-related diseases. The present study was carried out to investigate scavenging activities of Junglans sinensis extract and its subfraction using fluorescent probes, DCF-DA, DAF-2 and DHR 123. Jungians sinensis was washed and crushed. The crushed Junglans sinensis was extracted 3times, each time with 3 volumes of methyl alcohol at $60^{\circ}C$ for 24 h. The extract was filtered and evaporated under a reduced pressure using a rotary evaporator to yield 16 g. Scavenging activities of $ONOO^-$ was measured by Kooy' method and ROS was measured by DCFDA assay. Junglans sinensis had the marked scavenging activites of $ONOO^-$, NO and $O_2^-$. Junglans sinensis scavenged $ONOO^-$ through electron donation and dose-dependently inhibited the nitration of bovine serum albumin by $ONOO^-$. Junglans sinensis also had ROS scavenging activity. Especially, ethylacetate fraction of Junglans sinensis showed the most effective scavenging activities for ROS and RNS. These results suggest that Junglans sinensis might be developed as an effective ROS and RNS scavenger Therefore, Junglans sinensis might be used as a preventive agent for the aging and relevant to aging of illness.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.9 s.102
• /
• pp.1009-1015
• /
• 2005

Fluid-elastic instability and turbulence excitation for an under developing steam generator are investigated numerically. The stability ratio and the amplitude of turbulence excitation are obtained by using the $PIAT^{(R)}$ (program for integrity assessment of steam generator tube) code from the information on the thermal-hydraulic data of the steam generator. The aspect ratio, the ratio between the height of U-tube from the upper most tube support Plate (h) and the width of two vertical portion of U-tube (w), is defined for geometric parameter study. Several aspect ratios with relocation of tube support plates are adopted to study the effects on the mode shapes and characteristics of flow-induced vibration. When the aspect ratio exceeds value of 1, most of the mode shapes at low frequency are generated at the top of U-tube. It makes very high value of the stability ratio and the amplitude of turbulent excitation as well. We can consider that the local mode shape at the upper side of U-tube will develop the wear phenomena between the tube and the anti-nitration bars such as vortical, horizontal, and diagonal strips. It turns out that the aspect ratio reveals very important parameter for the design stage of the steam generator. The appropriate value of the aspect ratio should be specified and applied.

• Polymer(Korea)
• /
• v.31 no.5
• /
• pp.393-398
• /
• 2007

We studied the mechanism of liquid crystal alignment on polyvinylfluorocinnamate (PVCN-F) films which were irradiated by UV using polarized fourier transform infrared (FT-IR) spectroscopy and ultraviolet/visible (UV/Vis) spectroscopy. UV irradiation of PVCN-F films caused decrease of vinylene -C=C- stretching peak area at $1638cm^{-1}$ and shift of conjugated C:0 stretching vibration at $1712cm^{-1}\;to\;1734cm^{-1}$ which is caused by nonconjugated C=O stretching nitration. To study the orientation direction of 5CB liquid crystal (LC) molecules in the liquid crystal cell with PUV irradiation, rubbing treatment or without any treatment on the PVCN-F alignment layer, we used polarized FT-IR dichroism technique. We successfully measured 5CB LC alignment directions, which are perpendicular to the irradiated PUV polarization direction and parallel to the rubbing direction in the liquid crystal cell without using dichroic dyes.

• Korean Journal of Veterinary Research
• /
• v.57 no.1
• /
• pp.17-21
• /
• 2017

The aim of this study was to compare serum nitrotyrosine concentrations in healthy dogs with those in dogs with myxomatous mitral valve disease (MMVD). Fifty client-owned dogs were included in this study. Based on echocardiographic results, dogs were categorized into healthy (control), mild-, moderate-, and severe-MMVD groups. Serum nitrotyrosine concentrations were determined from enzyme-linked immunosorbent assays. No significant difference between control dogs and dogs with mild MMVD was detected (p = 0.31). However, dogs with moderate MMVD had significantly higher serum concentrations of nitrotyrosine (p = 0.04) than that in controls, and dogs with severe MMVD had significantly lower serum concentrations of nitrotyrosine (p = 0.03) than that in moderate MMVD dogs. There were negative correlations in the association of serum nitrotyrosine with age (n = 30, $R^2=0.067$, p = 0.27), left atrial-to-aortic root diameter ratio (n = 30, $R^2=0.02$, p = 0.57), and platelet count (n = 30, $R^2=0.39$, p = 0.003); however, only the platelet correlation was significant. Among dogs with MMVD, there was no significant difference in serum nitrotyrosine concentration between males and females. The results of this study suggest that tyrosine nitration end-products might be potential biomarkers for the detection of MMVD in dogs.

• Journal of the Korean Chemical Society
• /
• v.18 no.4
• /
• pp.278-288
• /
• 1974

Starting from p-dichlorobenzene, 2-amino-4-chloroanisole could be prepared via a nitration, a methoxylation, and subsequent reduction. The repeated chlorination of 2-amino-4-chloroanisole resulted 2-amino-3,4,5-trichloroanisole without any isomeric products. The chlorination of 4-chloro-2-nitroanisole could easily give 2,4-dichloro-6-nitroanisole but polychlorination of the product could not be achieved at the atmospherical pressure. The repeated chlorination of 2-amino-4,6-dichloroanisole could give 2-amino-3,4,5,6-tetrachloroanisole, The Schiemann reaction of 2-amino-4-chloroanisole and 2-amino-4,6-dichloroanisole could give 2-fluoro-4-chloroanisole and 2-fluoro-4,6-dichloroanisole, respectively. The repeated chlorination of these fluorochloroanisoles could give 2-fluoro-3,4,5,6-tetrachloroanisole. In each chlorination process, the components of products were examined by means of NMR spectrometry and the chlorination reaction was repeated without isolating each isomeric product. The feasibility of the present routes of preparations was discussed in respects to the conveniency of reaction conditions and respective overall yields of the processes.

• Korean Journal of Materials Research
• /
• v.33 no.7
• /
• pp.265-272
• /
• 2023

In this study, the synthesis of nitrobenzene was carried out using sulfated silica catalyst. The study delved into H₂SO₄/SiO₂ as a solid acid catalyst and the effect of its weight variation, as well as the use of a microwave batch reactor in the synthesis of nitrobenzene. SiO₂ was prepared using the sol-gel method from TEOS precursor. The formed gel was then refluxed with methanol and calcined at a temperature of 600 ℃. SiO₂ with a 200-mesh size was impregnated with 98 % H₂SO₄ by mixing for 1 h. The resulting 33 % (w/w) H₂SO₄/SiO₂ catalyst was separated by centrifugation, dried, and calcined at 600 ℃. The catalyst was then used as a solid acid catalyst in the synthesis of nitrobenzene. The weights of catalyst used were 0.5; 1; and 1.5 grams. The synthesis of nitrobenzene was carried out with a 1:3 ratio of benzene to nitric acid in a microwave batch reactor at 60 ℃ for 5 h. The resulting nitrobenzene liquid was analyzed using GC-MS to determine the selectivity of the catalyst. Likewise, the use of a microwave batch reactor was found to be appropriate and successful for the synthesis of nitrobenzene. The thermal energy produced by the microwave batch reactor was efficient enough to be used for the nitration reaction. Reactivity and selectivity tests demonstrated that 1 g of H₂SO₄/SiO₂ could generate an average benzene conversion of 40.33 %.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.3 no.2
• /
• pp.149-157
• /
• 2005

PFC(Perfluorocarbon) decontamination process is one of best methods to remove hot particulate adhered at inside surface of hot cell and surface of equipment in hot cell. It was necessary to develop a particulate filtration equipment to reuse PFC solution used on PFC decontamination due to its high cost and to minimize the volume of second wastewater. Contamination characteristics of hot particulate were investigated and then a filtration process was presented to remove hot particulate in PFC solution generated through PFC decontamination process. The removal efficiency of PVDF(Poly vinylidene fluoride), PP(Polypropylene), Ceramic(Al$_{2}$O$_{3}$ filter showed more than 95$\%$. The removal efficiency of PVDF filter was a little lower than those of other kiters at same pressure(3psi). A ceramic filter showed a higher removal efficiency with other filters, while a little lower flux rate than other filters. Due to inorganic composition, a ceramic filter was highly stable against radio nuclides in comparison with PVDF and PP membrane, which generate H$_{2}$ gas in e-radioactivity atmosphere. Therefore, the adoption of ceramic filter is estimated to be suitable for the real nitration process.

• Journal of the Korea Concrete Institute
• /
• v.17 no.2 s.86
• /
• pp.273-297
• /
• 2005

In construction site, there are some occasions where concrete under initial curing is being affected by nitration from nearby vibration sources. To study these effects, in this paper, strength characteristics of concrete specimens subjected to continuous vibration up to 12 hours in vertical direction after concrete placement were observed. And through the vibration time control experiment where a number of time combinations consisted of times before and after applying vibration during initial curing period were used as experimental parameters, possibility of concrete strength improvement was investigated. From the experimental results, it could be seen that the concrete strengths were mostly decreased due to the increase of vibration velocity during initial curing period. But fluctuation ratio of concrete strength did not have any close correlations with the vibration times. And results of vibration time control experiment showed that if times before applying vibration sustains at least more than 3 hours, subsequent vibrations after that hours do not affect the concrete strength in any unfavorable ways.